Press Release | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Press Release’ Category

FN Delivers Weapon System Test Samples to DoD’s Irregular Warfare Technical Support Directorate

Wednesday, October 8th, 2025

McLean, VA — October 8, 2025) FN America, LLC is pleased to announce that it has delivered test and evaluation samples of two all-new weapon systems – LICC-IWS and LICC-AMG – along with ammunition as part of a long-term development contract with the Department of Defense’s Irregular Warfare Technical Support Directorate (IWTSD). FN also conducted new equipment training (NET) and armorer’s training for both systems to demonstrate maintenance at the unit level.

FN America developed the weapon systems with feedback from individual operators, based on the U.S. Government goal of providing overmatch against near-peer threats. The systems were recently assigned National Stock Numbers (NSN), simplifying the acquisition process.

The LICC-IWS program is comprised of the 6.5×43 LICC (Lightweight Intermediate Caliber Cartridge) ammunition, the LICC-IWS (Individual Weapon System) with FN® IPC (Improved Performance Carbine), purpose-built magazine and signature suppressor. The LICC-AMG is based on the success of the prototype LICC ammunition and LICC-IWS system and is comprised of the LICC-AMG (Assault Machine Gun) belt-fed machine gun, signature suppressor, family of common ammunition, and lightweight links. Multiple users will test the operational samples , providing critical feedback to aid FN and IWTSD in the final development of the systems.

“FN’s ultimate goal is to advance from development into production and field a final solution that provides operators a system that is easier to operate, more accurate and more effective than anything available today,” said Mark Cherpes, President and CEO for FN America. “After this test and evaluation phase, our plan is to take user feedback, fine-tune the systems and move into low-rate initial production.”

LICC Weapon Systems and Ammunition

FN designed the LICC-IWS individual weapon system to improve lethality, accuracy, durability, balance and handling over the M4A1. The improved performance derives from a new 6.5×43 LICC lightweight ammunition , based on the U.S. Army Marksmanship Unit’s .264 USA; a 25-round purpose-built, polymer magazine; a signature suppressor, and the FN IPC. The FN IPC features a completely new architecture, well-suited to meet the challenging program requirements and address the feedback from operators who have contributed since the beginning of the program.

The LICC-IWS IPC handles much like an M4A1 but with key improvements to deliver a fully ambidextrous platform with unique takedown method and highly adjustable buttstock, which allows for user-selectable left- or right-hand side fold capability. It operates from a robust long-stroke gas piston system and features multiple buffers that reduce felt recoil, resulting in an extremely soft shooting weapon.

Additionally, it features a unique self-regulating gas system with on-off capability, and newly patented bullet technology developed from efforts to mature the 6.5×43 cartridge, that greatly improve system reliability and accuracy.

The LICC-IWS has been developed and is being tested in three different barrel-length models – a 12.5” Close Quarters Battle option, a 14.5” Carbine option and an 18.0” Designated Marksmanship Rifle option (RECCE).

“Initial test firing results from the U.S. Army Marksmanship Unit and other operators show that the accuracy of the LICC-IWS is consistently two times better than the M4A1,” said Jim Williams, Vice President, Military Programs for FN America. “Additionally, the LICC-IWS handles like the M4A1, yet remains soft shooting when firing the new 6.5×43 lightweight ammunition.”

Adapted from the FN Evolys®, the select-fire LICC-AMG is a shoulder-fired, belt-fed lightweight weapon system chambered in 6.5×43 LICC with a continuous monolithic top rail and an innovative side feed featuring a lightweight metallic link. In prototype testing, the AMG was more accurate than the FN MK 48 in full auto mode. Overall, the AMG demonstrated improved performance in lethality, accuracy, durability, balance and handling over the FN M249 and FN MK 46/MK 48 machine guns.

“Creating totally unique weapon systems around a specific caliber is in FN’s DNA,” said John Bungard, Sr. Director, Military Development Programs for FN America, LLC. “As our team worked on the LICC-IWS program, quickly followed by LICC-AMG, we were able to leverage our decades of engineering expertise across multiple weapons and ammunition platforms to come up with the ideal solution for today’s global threats.”

FN’s LICC-IWS and LICC-AMG submissions are ground-floor development efforts based on the IWTSD concept and FN’s unique 6.5x43mm LICC caliber developed with input from the U.S. Army Marksmanship Unit, IWTSD and individual operators. A family of lightweight, stainless steel cased 6.5×43 caliber ammunition was designed to reduce the carried weight of the system by 20% compared to equivalent brass cartridges, while achieving improved results in accuracy, range and performance over current fielded 5.56 ammunition, including M855A1 (5.56x45mm).

Irregular Warfare Technical Support Directorate (IWTSD)

The IWTSD exists to identify and develop capabilities for the Department of Defense (DoD) to conduct irregular warfare against all adversaries, including Great Power competitors and non-state actors. The IWTSD delivers those capabilities to DoD components and interagency partners through rapid research and development, advanced studies and technical innovation, and provision of support to U.S. military operations. In addition, the IWTSD directly manages bilateral agreements with five partner countries: Australia, Canada, Israel, Singapore and the United Kingdom.

“FN is excited to partner with the IWTSD to begin final testing and evaluation of the new LICC IWS and AMG systems,” said Bungard. “We cannot wait to get additional user feedback, fine-tune the systems and begin production of what promises to be the next groundbreaking FN platform.”

NSNs Assigned to Select Variants

Three variants of the LICC-IWS have been assigned national stock numbers (NSNs) and are available for requisition by Army, Navy, Marine, Air Force and SOCOM elements and activities. The three variants currently available for request are a 12.5” Close Quarters Battle option, a 14.5” Carbine option and an 18.0” Designated Marksmanship Rifle option, along with two suppressors supporting the system. The NSNs are:

NSN 1005-01-729-0039, FN IMPROVED PERFORMANCE CARBINE 12.5 IN CQB WITH BII*

NSN 1005-01-729-0052, FN IMPROVED PERFORMANCE CARBINE 14.5 IN CQB WITH BII*

NSN 1005-01-729-0046, FN IMPROVED PERFORMANCE CARBINE 18.12 IN REECE (sic) WITH BII*

NSN 1005-01-728-9868, SUPPRESSOR, FLOW 264 FOR IMPROVED PERFORMANCE CARBINE

NSN 1005-01-728-9874, SUPPRESSOR, FLOW 7.62 FOR IMPROVED PERFORMANCE CARBINE

*Basic Issue Items

FN and the U.S. Military

Throughout its history, FN has been one of the largest suppliers of small arms to the U.S. military and continues to develop innovative, future technology. The company currently holds contracts for the FN® M240 and its variants, the FN® M249 lightweight machine gun; the FN® MK 46, MK 48, MK 17 and MK 20 SSR for USSOCOM and various other contracts.

For more information about FN’s military product line or current U.S. military contracts, please visit www.FNAmerica.com.

Posted in Contracts, Press Release, SOF | 62 Comments »

GeoCue Introduces Immersive Image Explorer in LP360 for Next-Generation Data Fusion and Visualization

Tuesday, October 7th, 2025

Step Inside Your Projects with Imagery Fused Seamlessly onto LiDAR Point Clouds

For Immediate Release – October 8, 2025

Huntsville, AL – GeoCue, a global leader in LiDAR hardware and software solutions, proudly announces the release of theImmersive Image Explorer in LP360, a powerful new tool, available in plans for LP360 Drone or Land Standard, that transforms how users interact with their geospatial data.

The Immersive Image Explorer fuses captured imagery with LiDAR point clouds, enabling professionals to virtually “walk through” their scanned environments inside LP360. Whether collected from aerial, mobile, or handheld TrueView systems, imagery can now be overlaid directly behind point clouds for a richer, more intuitive exploration experience. The Immersive Image Explorer is also compatible with DJI L2 datasets.

“With the Immersive Image Explorer, our customers can step directly into their datasets, navigating captured environments as if they were on-site, while maintaining the accuracy and qualitythat LP360 is known for,” said Frank Darmayan, CEO of GeoCue. “It’s about bringing clarity, speed, and confidence to every project.”

Flexible Image Options

The Immersive Image Explorer supports both frame images imported directly from the integrated cameras on aerial, mobile, or handheld TrueView hardware, as well as fully 360° spherical images collected with the TrueView GO 360 Photo Kit or the FLIR LadyBug camera for mobile mapping. No matter which format is used, the Immersive Image Explorer gives you the ability to pan, scan, and evaluate your photos directly within LP360, ensuring every detail of your project can be examined with clarity and precision.

A New Dimension in LP360 Visualization

The Immersive Image Explorer can be found within the Immersive View Window in LP360. The Immersive View Window is now the fourth main visualization option in LP360, joining Map View (2D), 3D View (isometric), and Profile View (cross-sectional).

Rather than replacing these views, the Immersive View Window complements them by combining many of their core capabilities into a single, intuitive interface. It allows users to view, navigate, and analyze their 3D data from multiple angles in real-time. Within this environment, the Immersive Image Explorer unlocks the ability to overlay imagery directly onto point clouds, seamlessly merging photos and LiDAR into a unified, immersive perspective.

Key Capabilities

Handheld Advantage – Merge imagery from TrueView GO’s three cameras with dense point clouds for detailed indoor and close-range visualization.

Aerial Integration – Seamlessly incorporate images from TrueView aerial payloads to provide context-rich overviews of larger sites.

Immersive Deliverables – Create a “street view” style navigation of your own data, fully measurable and directly inside LP360.

Flexible Image Sources – Works with frame images from integrated TrueView cameras or 360° spherical imagery captured by the TrueView GO 360 Photo Kit or FLIR LadyBug camera for mobile mapping.

Transforming Workflows Across Industries

From confined interior corridors to expansive construction sites, the Immersive Image Explorer empowers surveyors, AEC professionals, and public safety teams to work more effectively. It allows users to verify coverage and spot potential gaps before ever leaving the job site, ensuring confidence in their datasets. By merging real-world imagery with LiDAR, inspection and validation workflows become faster and more accurate, giving teams a deeper understanding of their projects.

“The Immersive Image Explorer is more than a viewer, it’s a smarter way to navigate, validate, and present geospatial data,” added Vivien Heriard Dubreuil, CEO of mdGroup, GeoCue’sparent company. “By combining imagery and LiDAR in one immersive environment, we’re enabling professionals to work faster, communicate better, and deliver more value to their clients.”

With Immersive Image Explorer, LP360 continues to evolve as the industry’s most complete platform for LiDAR and imagery workflows, putting users directly inside their data with clarity and precision.

To learn more about GeoCue, visit www.geocue.com.

Posted in Optics, Press Release, Sensors | Comments Off on GeoCue Introduces Immersive Image Explorer in LP360 for Next-Generation Data Fusion and Visualization

DroneShield Announces South Australia R&D Facility

Tuesday, October 7th, 2025

DroneShield will invest $13 million over three years to establish a new counter-drone R&D facility in Adelaide, Australia.
The new facility will be led by Jeff Wojtiuk, a former Lockheed Martin Australia defence engineering leader with a strong background in RF design and electronic warfare.
Together with planned expansions to its Australian and international R&D footprint, including the new Adelaide facility, DroneShield’s has this week reached a significant company milestone, surpassing 400 employees globally.
This expansion in South Australia is concurrent with DroneShield’s Sydney, European, and US manufacturing initiatives, against the backdrop of record global demand and surging drone attacks.

DroneShield (ASX:DRO), a global leader in counter-drone and electronic warfare (EW) solutions, is pleased to announce a $13 million investment in a new research and development (R&D) facility in Adelaide, South Australia.

This $13 million investment is a direct contribution to South Australia’s economy, covering three years of operational and capital expenditure. It will initially create around 20 high-skilled engineering roles in Adelaide, focused on radio frequency (RF) electronics, EW, and systems integration, to directly support DroneShield’s mission to deliver cutting-edge defence technologies.

The South Australian expansion complements DroneShield’s existing engineering operations in Sydney and supports the Company’s continued growth in advanced RF electronics and EW capabilities. Adelaide has been chosen due to its proximity to leading global defence and aerospace organisations, a highly skilled engineering workforce, and established infrastructure supporting advanced technology development, particularly in EW and RF systems.

The announcement comes as DroneShield reaches a significant company milestone, this week surpassing 400 employees globally, nearly doubling its team in the past year and more than quadrupling it over the last two years. Approximately 300 of these employees are software and hardware engineers, reinforcing DroneShield’s position as a world-leading technology company focused on delivering advanced defence capabilities. The Company also has around 100 open roles, reflecting its commitment to delivering on its technology roadmap and supporting customers and allies with speed and scale.

DroneShield Chief Executive, Oleg Vornik, said, “South Australia is recognised as a national leader in defence and space industries, with Adelaide home to a highly skilled and experienced workforce. Establishing our first R&D office in Australia outside of our Sydney Headquarters – in Adelaide – is a strategic move that supports DroneShield’s mission to deliver world-leading counter-drone and EW solutions.”

“DroneShield’s growth to 400 employees globally – with the majority of our team being engineers – reflects our commitment to deep technical capability and delivery.”

DroneShield Chief Product and Technology Officer, Angus Bean, said, “DroneShield’s new R&D facility in Adelaide marks a significant step forward in our commitment to ensuring our technology roadmap is being supported by the best engineering minds nationally. Our new facility is critical to accelerating the development of our next-generation counter-drone and EW technologies, while expanding our engineering footprint and supporting critical project development for global customers”.

Premier of South Australia, The Hon Peter Malinauskas, said, “South Australia is the Defence State, and has been recognised by the Business Council as the best place in the country to do business. We welcome DroneShield making the choice to conduct research and development here in Adelaide, creating 20 highly skilled engineering roles. As a Government, we have a strong focus on growing our Research and Development ecosystem, which has the capacity to build our economic complexity and our state’s prosperity.”

DroneShield’s South Australian R&D facility will be led by Jeff Wojtiuk, a leading Australian engineer who specialises in radio frequency technologies. Jeff brings over two decades of experience in defence and aerospace systems engineering, with a strong background in RF design, EW, and complex systems integration. He has held senior engineering roles across major defence programs – including over a decade of experience at Lockheed Martin Australia – and has contributed to the development of advanced radar and communications technologies. His expertise will be instrumental in shaping the technical direction of DroneShield’s new Adelaide facility.

The new site is expected to be fully up and running by March 2026.

Image: DroneShield’s anechoic chamber supports research and development contributing to the Company’s world-leading counter-drone technologies

The South Australia R&D expansion comes as DroneShield is going through expansion of its annual production capacity from $500m to $2.4bn by end of 2026, including setting up European and US manufacturing; as well as R&D expansion in the US.

Posted in C-UAS, Industry, International, Press Release | Comments Off on DroneShield Announces South Australia R&D Facility

Shield Arms Announces DS-Series Increased Capacity Magazines for Glock 9mm Pistols: DS-18 and DS-20 Available Soon

Tuesday, October 7th, 2025

Bigfork, Montana manufacturer announces increased capacity Glock 19 and Glock 17 magazines with innovative over-insertion stop technology

BIGFORK, MT – October 7, 2025 – Shield Arms, a premier manufacturer of aftermarket Glock magazines and firearm accessories, today announced its DS-Series increased capacity magazines for Glock double stack 9mm pistols. The new product line includes the DS-18 magazine for Glock 19 and the DS-20 magazine for Glock 17, 34, 45, 47, and 19X models.

Increased Magazine Capacity: DS-18 and DS-20 Specifications

The Shield Arms DS-Series delivers what other aftermarket Glock magazines have never achieved: +3 round capacity increase in nearly the same footprint as factory magazines, combined with OEM-style reliability features.

DS-18 Glock 19 Magazine: 18-round capacity magazine for Glock 19 pistols, providing +3 rounds over OEM Glock factory capacity (standard 15 rounds) with only a minimal increase in overall magazine length.

DS-20 Glock 17 Magazine: 20-round capacity magazine compatible with Glock 17, Glock 34, Glock 45, Glock 47, and Glock 19X pistols, offering +3 rounds over factory Glock magazines (standard 17 rounds) with only a minimal increase in overall magazine length.

Additional magazines both smaller and larger coming in the DS-Series!

Innovative Over-Insertion Stop Technology

Both DS-Series Glock magazines feature an over-insertion stop precision-stamped directly into the steel magazine body—a critical reliability feature found in Glock factory magazines but missing in competitors aftermarket Glock magazines.

This feature ensures proper magazine seating depth, prevents over-insertion that can cause ejector damage, feeding malfunctions, and delivers factory-spec reliability. The result is an aftermarket Glock magazine that functions with the same mechanical precision as OEM magazines while providing +3 round capacity advantage.

“The DS-Series represents a breakthrough in aftermarket Glock magazine design,” said Brandon Zeider, CEO of Shield Arms. “We’ve achieved what the market has been asking for: significantly more capacity in nearly the same size as factory magazines, combined with the over-insertion stop feature that ensures OEM-level reliability. These magazines give Glock users the best of both worlds – extra rounds when it matters most, without sacrificing the profile or dependable function they expect from their pistols.”

Availability and Product Options

Shield Arms DS-Series magazines will be available soon through our Distributors and Retail Partners, internationally through our International Distributors, and on our website. Customers can purchase individual DS-18 and DS-20 magazines, or explore complete DS-Series combos and DS-Series magazine extensions for additional customization options.

Product pages and ordering information:

Shield Arms homepage

DS-Series Glock magazines

DS-Series magazine combos

DS-Series magazine extensions

Posted in Press Release, Weapon Accessories | Comments Off on Shield Arms Announces DS-Series Increased Capacity Magazines for Glock 9mm Pistols: DS-18 and DS-20 Available Soon

Milrem Robotics to Deliver over 150 THeMIS UGVs to Ukraine in a Dutch-Led Defence Initiative?

Tuesday, October 7th, 2025

Milrem Robotics—the world’s leading robotics and autonomous systems developer—will deliver over 150 THeMIS unmanned ground vehicles (UGVs) to Ukraine as part of a donation funded and coordinated by the Netherlands. A significant portion of these vehicles will be assembled and delivered in collaboration with VDL Defentec.

The donation was initially announced in September, however, the identity of the contributing country was not disclosed. On 6 October, the Dutch Minister of Defence, Ruben Brekelmans, joined Milrem Robotics and VDL for a formal announcement and signing ceremony at VDL’s facility in Born to mark the agreement.

The deliveries will be executed by Milrem Robotics Netherlands in close cooperation with VDL Defentec, which is establishing a dedicated final assembly line at its Born facility. The assembly setup is designed for scalability, enabling further production and deliveries in response to future requirements.

Milrem Robotics will deliver comprehensive training to Ukrainian operators and support staff to ensure efficient deployment and maintenance in the field.

“We are honoured to lead this project in partnership with the Netherlands and VDL. The THeMIS platform has already demonstrated its value under combat conditions, and we believe this contribution will materially strengthen Ukraine’s defence capability,” said Kuldar Väärsi, CEO of Milrem Robotics.

“This initiative highlights the strength of cooperation between partners in Europe’s defence industry and their ability to scale up and contribute directly to international security. Establishing the assembly line in Born supports this donation and creates a foundation for future production and innovation between Milrem Robotics and VDL in the Netherlands,” said Willem van der Leegte, CEO of VDL Groep.

The new units will add to the 15 THeMIS vehicles already in operation in Ukraine, which have been proving their effectiveness on the battlefield since 2022.

THeMIS is a proven and highly adaptable unmanned vehicle platform designed to support dismounted forces, logistics, reconnaissance, and combat support missions. It is currently part of robotics programmes or in service in 19 countries, making it the most widely deployed UGV in its class.

Posted in Contracts, International, Press Release, Robotics | Comments Off on Milrem Robotics to Deliver over 150 THeMIS UGVs to Ukraine in a Dutch-Led Defence Initiative?

BlackPoint Tactical Launches Duty Series Holsters

Tuesday, October 7th, 2025

ALPHARETTA, GA, October 6, 2025 – BlackPoint Tactical, a High Speed Gear Products Group brand, long known for their innovative concealment holsters, proudly announces the launch of its latest productfamily: The BlackPoint Duty Series featuring the Enhanced Duty Holster (EDH) and Slick Duty Holster (SDH), BlackPoint’s first holsters featuring additional levels of retention. These products were designed and engineered specifically for law enforcement, military, and prepared citizens who demand uncompromising security during the most demanding encounters, while providing a draw mechanic that remains smooth, fast, and consistent.

Based off the Master Grip Concept, the user can comfortably depress the retention lever to deactivate the retention mechanisms without the hand articulation and movement required to manipulate other duty holsters on the market today. The consistent grip allows for a fast, consistent draw stroke leading to more accurate and faster rounds on target. Further, the continuity in the mechanics of the retention lever activation is consistent across all levels of retention. This patented feature translates across the company’s product lines into the Taser holsters, diminishing training hurdles based on which system is utilized. Available in light compatible and non-light compatible models, the Duty Series offers several features not seen previously in a Duty Holster. One of these features is the patent pending SHIM™ system. By changing which SHIM™ is installed, the holster can be configured to fit different weapon lights. As your equipment changes, your gear can adapt with you. At launch, SHIMs are available to support the TLR-7, TLR-1, and x300 U/A models with more coming later in 2025.

Other key features of the BlackPoint Duty Series are as follows:

• Retention Levels: Available in 3 level (EDH family) and 2 level models(SDH family).

• Full Coverage Trigger Guard: Minimizes any object from entering trigger guard while pistol is holstered.

• Optics Cover: Optional Optic Cover to help enclose the optic cavity when holster hood is closed

• Barrel Plug: Allows the holster to function with or without the weapon light attached.

• Retention Lever Overdrive: Lever range of travel beyond release enhancing draw performance.

• Lever Extender: Extends the retention lever to enhance ergonomics based on user preference.

• Material Thickness: Holster features durable unibody 0.125” KYDEX® design.

• Mounting: Compatible with mounts from popular 3rd parties. *Adapter Plate Required

“The design team thoughtfully executed every detail of this holster based on feedback from real-world operators,” said Gary Robbins, Director of Law Enforcement Business Development at High Speed Gear. “This is the next evolution in professional duty gear and stay tuned, because there is more to come”.

“When you consider duty holsters, this is a piece of gear that must perform 100% of the time,” said Tyler Johnson, VP of Sales and Finance. “The BlackPoint Duty Series upholds that commitment and provides a strong alternative to individuals and agencies which have longed for innovative options in the market. BlackPoint is excited to enter this market and complement the industry-leading options offered by High Speed Gear.”

The BlackPoint Enhanced Duty Holster is available for pre-orders through company websites and dealers. Additional firearms compatibility will be added on an ongoing basis. Please continue to check back for information on new models.

For more information about the BlackPoint Duty Series, please visit:
blackpointtactical.com/shop/category/duty-series

Posted in Advertiser, Holsters, Press Release | Comments Off on BlackPoint Tactical Launches Duty Series Holsters

Henry Repeating Arms Expands Spirit of the Corps Rifle Series for Marine Corps’ 250th Anniversary

Monday, October 6th, 2025

RICE LAKE, Wis., Oct. 2, 2025 — Henry Repeating Arms, one of America’s leading firearms manufacturers, is building upon the success of its now sold-out and discontinued salute to the United States Marine Corps’ 250thanniversary with two new models: the Spirit of the Corps 250th Anniversary 2nd Edition .22 S/L/LR and the Spirit of the Corps 250th Anniversary .45-70 Gov’t.

“The response to the first rifle was remarkable, and we knew we had to continue this milestone collection for those who missed out the first time around,” said Anthony Imperato, Founder and CEO of Henry Repeating Arms. “These new models pay homage to the branch’s 250 years of being both sword and shield for the freedoms we enjoy as Americans, and the millions of men and women who have answered the call to serve amongst its ranks.”

Spirit of the Corps 250th Anniversary 2ndEdition .22 S/L/LR (H004MC2)
Built on the award-winning and world-renowned Golden Boy platform, this lever-action rimfire rifle features mechanically transferred engravings based on a hand-engraved master plate for maximum clarity with 24K gold-plated highlights against a nickel-plated backdrop. The genuine American walnut buttstock showcases full-color portraits throughout history standing in front of the flag of the United States of America, while the forearm bears the banner: “In the Air, On Land, And Sea.” The MSRP is $1,350.

Spirit of the Corps 250th Anniversary Edition .45-70 Gov’t (H010BGMC)
Introduced in direct response to customer feedback requesting a larger caliber option for the series, this rifle is chambered in the powerful and historic .45-70 Government, a cartridge once used by the United States Marine Corps until 1897. It pairs a nickel-plated, hardened brass receiver with 24K gold highlights and upgraded Semi-Fancy American Walnut furniture. The receiver features inscriptions from the Marines’ Hymn, while the buttstock depicts a crowd of hands triumphantly raising the U.S. flag. The MSRP is $2,360.

Both rifles are made in Wisconsin and backed by Henry Repeating Arms’ Lifetime Warranty and 100% Satisfaction Guarantee. They are available now through Henry dealers nationwide. For more information, visit the product page at henryusa.com.

These rifles are not affiliated with, endorsed by, or officially licensed by the U.S. Department of Defense or any of its branches.

Posted in Firearms, Press Release, USMC | 1 Comment »

Outdoor Research Named Staff Apparel Sponsor for Industry Day at the Range 2026

Monday, October 6th, 2025

BOULDER CITY, Nev. – October 2, 2025 – SHOT Show® Industry Day at the Range, the highly anticipated hands-on event held annually the day before SHOT Show®, is thrilled to announce Outdoor Research as the official Staff Apparel Sponsor of the 21st annual event, taking place January 19, 2026, at the Boulder Rifle and Pistol Club in Boulder City, Nevada.

This collaboration marks a new chapter in elevating the on-site experience for Industry Day staff, who will be fully outfitted in technical apparel from Outdoor Research. Known for its commitment to innovation, performance and protection in the outdoors, Outdoor Research’s support ensures the event staff will be equipped with the gear they need to perform in all conditions throughout the day.

“We’re proud to support the SHOT SHOW Range Day team as the official Staff Apparel Sponsor,” said Nick Smith, senior tactical brand manager at Outdoor Research. “This event showcases the cutting edge of the tactical and outdoor sports industries, and we’re proud to outfit the staff in the same mission-ready gear trusted by professionals operating in the world’s most demanding environments.”

Industry Day offers an unparalleled opportunity for exhibitors to introduce new products, engage with top-tier media and influencers and create direct connections with SHOT Show attendees in a hands-on environment. This exclusive event provides early momentum that extends well into the SHOT Show itself, ensuring maximum exposure for brands ahead of the main event.

“Having Outdoor Research join us as the Staff Apparel Sponsor is a perfect fit,” said Kelsey Puryear, Industry Day at the Range co-owner. “Its dedication to function, comfort and quality aligns perfectly with the needs of our team on the ground. We’re excited to have them be a part of the 2026 event.”

The sponsorship by Outdoor Research enhances the professionalism and cohesion of Industry Day at the Range. As a respected leader in technical outdoor gear, Outdoor Research brings added credibility and industry alignment to the event, reinforcing its reputation as the premier range day in the shooting sports industry.

Supported by the National Shooting Sports Foundation as title sponsor through 2028, Industry Day at the Range remains the only official range event associated with the SHOT Show. Exhibitor space is limited, and early registration is strongly encouraged.

New exhibitors can register online now to secure their space. Sponsorship information is also available online. For additional details and answers to frequently asked questions, please visit the event website.

For more information about the 2026 SHOT Show Industry Day at the Range visit ShotShowRangeDay.com.

Posted in Clothing, Industry, Press Release, SHOT Show | Comments Off on Outdoor Research Named Staff Apparel Sponsor for Industry Day at the Range 2026