Danner Reckoning GTX

Archive for the ‘Rampart Range Day’ Category

Rampart Range Day 19 – Royal Marines Pyrad Rain Suit by Carinthia

Wednesday, May 29th, 2019

Austria-based Carinthia makes some fantastic gear for some of Europe’s most elite military units. For instance, they developed this rain suit for the British Royal Marines.

Made from WL Gore’s Pyrad material, it is a waterproof/breathable Gore-Tex shell which is also FR. It is also printed in the British military’s Multi Terrain Pattern camouflage.

The suit is based on Carinthia’s PRG rain suit which incorporates large zippered chest pockets as well as zippered bicep pockets and zippered underarm ventilation.

Carinthia products are available in Canada from Rampart International.

Rampart Range Day 19 – Xion Protective Gear

Wednesday, May 29th, 2019

While there were several great new products at Rampart Range Day, none surprised nor impressed me more than Xion (pronounced zion) Protective Gear. Their garments have been worn for years in sports and by stuntmen, protecting from blunt trauma injuries. But now, they’ve been discovered by LE for use as a low viz crowd control suit for use in scenarios where the appearance of full riot gear might increase tensions. Naturally, the gear can be worn in any scenario where blunt force trauma is a threat.

The suits can be worn under outer garments.
Some of the garments are also FR, adding another facet of personal protection.

The secret is in their use of D3O pads which works as a non-Newtonian fluid, absorbing high energy impact, yet remaining malleable when not under force. In fact, the founders of Xion came from the stunt industry and have been working with D3O for many years on pad designs.

Xion Protective Gear products are available in North America from Rampart International.

Rampart Range Day 19 – Blackhawk T-Series Light Bearing Holster

Tuesday, May 28th, 2019

Last month, Blackhawk launched their new T-series line of holsters with its thumb actuated release mechanism. As part of a phased roll out of additional models, they just introduced a level 2 and level 3 light bearing holster.

Seen here is a level 3 retention model. What makes the introduction of this model even more significant is that it accepts the Streamlight TLR–1 light. Previous light bearing holsters from Blackhawk have only accepted the Xiphos light.

Blackhawk products are available in Canada from Rampart International.

Rampart Range Day 19 – Colt Canada Eagle 40mm Grenade Launcher

Tuesday, May 28th, 2019

The Eagle From Colt Canada is a single shot, side opening 40mm grenade launcher.

D4EF0B81-C435-42FD-8A57-E0BEBEF6B913

Manufactured in Kitchener, Ontario, it can be undermounted to a rifle or used in stand-alone mode with a detachable chassis. The side opening breech can be configured to open from right or left. The safety lever is located on either side of the receiver.

C1D7EDB3-FADA-45A2-A377-F7E9618B65C9

The trigger is double action with a long takeup but the trigger can be immediately pulled in the event of misfire without revolving the weapon. Additionally, the breech is opened with a forward press of the release located at the front of the trigger guard.

3F64A8D2-96D7-4811-A932-68EA06EFAA75

Colt Canada products are available from Rampart International.

Rampart Range Day 19 – Aku Selvatica Tactical Mid GTX

Tuesday, May 28th, 2019

Aku is no stranger to longtime SSD readers, but the Selvatica Tactical Mid is new to North America. It’s cold and rainy on the Stittsville Range today so getting my hands on this pair was quite welcome.

81131BA7-C1F3-48DB-AACF-48F52F9DD853

The upper is made from Aku’s proprietary AIR8000 nylon with welded PU reinforcing ribs. The liner is Gore-Tex Extended Comfort.

4E382BA8-397C-47AD-A633-A3C5EEF267CC

The outsole is Vibram Selvatica Megagrip combined with an injected EVA midsole and the boot comes with an OrthoLite anti-microbe and breathable insole.

085B334B-EE69-4C68-88C6-541121BAE23B

Aku products are available in Canada from Rampart International.

Rampart Range Day 19 – M2 Machine Gun Accessories from BE Meyers & Co, Inc

Tuesday, May 28th, 2019

BE Meyers & Co, Inc offers two upgrades for the venerable Ma-Deuce.

On the left of the photo is the 2300F Flash Hider and is designed for legacy barrels which aren’t threaded.instead it uses a floating locking collar and locking ring.

8170CC4D-1EA4-493B-A8C7-941898345E00
To the right of the photo is BOARS-M2 (B.E. Meyers Optics & Accessories Rail System), a low-profile mounting solution that offers a quick-disconnect with true return-to-zero reattach.

Key features for the BOARS-M2 include: a quick detach optics/laser rail, snag free design, non-marring installation, low height-over-bore, and oversized pass through aperture for use with iron sights.

BOARS will also fit the M2, M2A1, M3 series .50 caliber heavy machine gun platforms.

B.E. Meyers products are available in Canada from Rampart International.

Editor’s note: Story was updated with correct flash hider model.

Rampart International Is Colt Canada’s Exclusive Canadian LE Distributor

Tuesday, May 28th, 2019

I just found out at Rampart Range Day 2019 that Rampart International is now the exclusive law enforcement distributor in Canada for Colt Canada.

This is Colt Canada Law Enforcement Brand Ambassador Mark Ruffolo showing us the MRR in 11.6″ (top photo) and 14.5″ (bottom photo).

The Modular Rail Rifle features a monolithic upper with a full length M1913 rail along the top and M-Lok slots along the sides of the hand guard portion of the upper. It also features a free floating, cold hammer forged, chrome lined barrel and ambidextrous controls. Offered in 5.56×45 mm NATO, 7.62×51 mm NATO and 300 BLACKOUT.

2019 Rampart International Range Day and Expo

Tuesday, May 28th, 2019

We’re north of the border today to check out the latest guns and gear, courtesy of Rampart International.