Phantom Lights

Archive for the ‘SHOT Show’ Category

Safariland Announces Technology Sharing Agreement with FirstSpear

Tuesday, January 19th, 2016

ONTARIO, California – The Safariland Group today announced a new agreement with FirstSpear™, a manufacturer of exceptional tactical equipment for elite military and law enforcement units, to integrate FirstSpear technology into tactical vests and carriers for the Safariland® Armor collection and Protech® Tactical armor.

The licensing agreement between these two industry-leading armor companies encompasses key technologies such as the FirstSpear Tubes™ and the 6/12™ and 6/9™ pocket attachment systems.

FirstSpear Tubes: These tubes innovate the armor carrier closure system with enhanced solutions for donning and doffing tactical body armor. Manufactured from lightweight, high-performance polymers, the tubes exceed the strength of other molded fasteners currently used on operational gear. This allows field teams to progress beyond cables to the tube system that augments performance and minimizes weight.

FirstSpear 6/12 Pocket Attachment System: The 6/12 is an all-new, design-engineered pocket attachment system that reduces weight by up to 50 percent, is backward compatible with MOLLE and PALS standards and forward compatible with FirstSpear’s ultra-lightweight pockets. From adhesive heat-set backing to laser cut precision attachment points, this system meets the need for modular, lightweight load-carriage platforms and pockets.

FirstSpear 6/12 Modular Pocket Technology: Building on the 6/12 Pocket Attachment System, this companion modular pocket technology condenses weight by more than 40 percent without sacrificing performance.

FirstSpear 6/9 Modular Pocket Technology: The pocket technology developed for the 6/9 is a transitional attachment choice between the traditional MOLLE/PALS system and 6/12 platforms. With pockets that mount closer to the body and conform tighter to the platform, 6/9 offers significant weight reduction from other pockets, offers flexible attachment straps and is compatible with legacy platforms.

“We are extremely excited about this agreement with FirstSpear, advancing our arsenal of technology invested in tactical body armor to be the best available,” said Todd Mackler, Vice President, Armor for The Safariland Group. “Through this partnership, Safariland continues to revolutionize the body armor market with the tactical operator’s safety and comfort in mind.”

This technology sharing agreement with FirstSpear demonstrates Safariland’s commitment to the mantra that, “Together, We Save Lives.”

Ronnie Fowlkes, VP Business Development for FirstSpear stated, “FirstSpear is dedicated to enhancing the capabilities of the professional user, and this agreement will provide flexibility and increased access to proven technologies that have become the standard for those who demand the most from their equipment.”

These new technologies will be on display at SHOT Show, January 19-22 in Las Vegas, Nevada. Visit booth #12762 to further explore The Safariland Group’s latest products.

Outdoor Research Introducing Muzzle Brake Tropical-Wear Tactical Garments

Tuesday, January 19th, 2016

Outdoor Research, in collaboration with W. L. Gore & Associates, Inc. (Gore), has introduced the Muzzle Brake Blouse and Muzzle Brake Pants – a new uniform concept using GORE® Advanced Combat Fabric (ACF) – a high strength, durably fast drying, highly air permeable fabric that meets the no melt/no drip requirement of the Department of Defense. With more military personnel rotating through Pacific and hot climate regions, the innovative design of the two styles combined with the unique textile will assist with maintaining comfort, while offering optimal performance when exposed to the temperatures and humidity levels in these areas.

For more information about Outdoor Research, visit military.outdoorresearch.com/gov

For more information on Gore’s military fabrics, visit www.goremiltary.com

New Picatinny IZLID Mount from BE Meyers

Tuesday, January 19th, 2016

  
This is BE Meyers’ new offset mount for the IZLID Ultra and 200P lasers. This one is in the white, but it gives you a good perspective of how close it gets to the rail to make it less of a snag hazard. The 200P and Izlid Ultra are amazing for long range shooting at night. The 200P at 200mw is a nice compact package that will illuminate to around 800 meters and the Ultra at 1K mw will push that laser out even farther. Great option for long range sniping with all the .300 win mags and .338 lapua’s out there.

  
BE Meyers is at booth #20361.

SHOT Show – Industry Day At The Range – Angel Armor RISE Concealable Armor System

Tuesday, January 19th, 2016

DSC07000

Angel Armor’s RISE Concealable Armor System designed to be worn close to the body for concealed wear, yet remain comfortable through extended use. It’s constructed of Cordura nylon and polyester, providing abrasion, tear, and scuff resistance, and a breathable, antimicrobial mesh liner for additional comfort, as well as odor and moisture management. Additionally, RISE features low profile, laser cut panels which are MOLLE/PALS compatible, and a QuadCore Attachment System which is designed to ensure a repeatable fit and quiet adjustment. The RISE system is available in both male and female body configurations.

DSC07002

The RISE System is partnered with Angel Armor’s Truth Snap plate system. The Truth Snap System consists of two low-profile magnetic armor plates, which “snap” together, hence the name. These plates are available in a variety of cuts, and come in two configurations: Truth 47 and Truth 44.

Truth 47 is NIJ Level IIIA rated, capable of stopping 7.62×39 123gr FMJ bullets, and is tested as able to stop a variety of ‘special threats’, including FN 5.7x28mm SS197 40gr V-Max and Winchester Ranger 9mm Luger +P+ 127gr SXT bullets.

Truth 44 is NIJ Level IIIA rated as well, capable of stopping .44 MAG 240 gr Lead SWC Gas Checked bullets, as well as a variety of ‘special threats’.

When combined, the two pieces are capable of stopping 5.56x45mm 55gr FMJ bullets, as well as ‘special threats’ the individual plates are capable of stopping.

armor.angelintelligence.com

SHOT Show – Industry Day At The Range – Ruger Silent-SR

Tuesday, January 19th, 2016

DSC06994

The Silent-SR is the first ever suppressor manufactured by Ruger. It is designed for rimfire cartridges, such as the .22 LR, .22 WMR, and .17 HMR. The Silent-SR is made of titanium, with a stainless steel end cap, and stainless steel baffles. The baffles feature a pushed cone design, which create a cross-jetting effect, slowing and cooling the gasses, and reducing sound report by up to 40 dB.

DSC06995

www.ruger.com

SHOT Show – Industry Day At The Range – IWI X95

Tuesday, January 19th, 2016

DSC07020

The X95 is essentially an upgraded, more compact version of the popular Tavor TAR-21 bullpup rifle. The X95 features a tri-rail forend covered by three removable rail covers, the bottom most of which incorporates an integrated hand stop. The trigger guard and grip is a singular piece, which can be removed via a single screw, and replaced with a more traditional pistol grip. The charging handle is located closer to the shooter’s center mass, and features a more pronounced hook for easier manipulation. The X95 also utilizes an ambidextrous magazine release more in line with an AR-style weapon that the original Tavor.

The X95 will be available in 5.56, .300 BLK, and 9mm, along with conversion kits for all listed caliber. Colors: Black, Flat Dark Earth, and OD Green.

www.iwi.us

SHOT Show – Industry Day At The Range – Standard Manufacturing SKO

Tuesday, January 19th, 2016

DSC07033

Along with the double-barrel pump action DP-12, Standard Manufacturing brought along a prototype shotgun called the SKO. A magazine-fed semi-auto 12 gauge, there wasn’t too much information available for the SKO, other than it’s currently in testing, it features AR-style controls, magazines of capacities from 3-25 rounds will be offered, and it might be out anytime between later this year and sometime in 2017.

DSC07037

Oh, and there’s also a bullpup configuration called, appropriately enough, the SKO-Bull.

www.stdgun.com

GLOCK Releases Two New MOS Pistols:G17 Gen4 in MOS & G19 Gen4 in MOS

Tuesday, January 19th, 2016

Today, GLOCK, Inc., announced the release of two new pistols to join the Modular Optic System (MOS) series, the G17 Gen4 in MOS and the G19 Gen4 in MOS.
Now, two of GLOCK’s best selling pistols are available with milled slides designed specifically to be adaptable to multiple optic systems without costly customization. The G17 Gen4 MOS and G19 Gen4 MOS are the ideal addition to the series as the market continues to trend toward optic-ready everyday carry and defense.

   
 “We’re seeing more and more professional trainers recommend the use of optics for primary and defensive use,” stated Josh Dorsey, vice president at GLOCK. “Optic ready pistols will enable faster target acquisition when a reflex sight is mounted.”

Both pistols are chambered in .9mm and do not differ in specifications from their respective standard models. Other MOS pistols, introduced in January of 2015, are the G34 Gen4 MOS, G35 Gen4 MOS, G41 Gen4 MOS, and the G40 Gen4 MOS. The new models were unveiled today at the Range Day for SHOT Show and will be on display at the GLOCK booth (#12254) throughout the week. The pistols will be available for purchase at retailers in the following weeks.

To learn more about the new MOS pistols, visit https://us.glock.com/MOS.