The C&S BHP Armorer’s Punch Set includes 7 tools. A screwdriver to remove the magazine catch, 2 punches to remove the sear, thumb safety, ejector, hammer, sear spring, firing pin stop and firing pin, 1 brass punch to start the trigger pin out and a cup tip punch to complete the removal of the trigger pin, 1 #53 drill bit to remove the roll pin that holds the right ambi safety wing for the Girsan and the BHP pistols with an ambi safety and 1 roll pin punch to remove the seat bar and extractor.
WASHINGTON, MO, June 14, 2023 – Elite Survival Systems, a leading provider of innovative, high-quality gear for military, law enforcement, and shooting enthusiasts, is thrilled to announce that the Lightweight Tactical Shooting Mat is now available for immediate delivery. Designed with the modern shooter in mind, this innovative product is the perfect companion for any outdoor shooting expedition.
The Lightweight Tactical Shooting Mat merges durability with practicality, offering a sleek and lightweight design that is easy to carry and deploy. The mat, which transforms from a compact carry form to a fully extended shooting platform in mere seconds, represents a new era in comfort and functionality for shooting enthusiasts.
“Shooting mats have been a mainstay for marksmen for decades. However, there was a significant need to improve upon the design and functionality, while still maintaining the practical elements that shooters love,” said Bryan Bogue, from Elite Survival Systems. “Our Lightweight Tactical Shooting Mat has been developed to meet these needs, offering a product that provides comfort, portability, and durability. We’re incredibly excited to see the positive response this product will generate in the shooting community.”
The mat’s innovative design includes features that are customized to the needs of the tactical shooter, such as an anti-slip waterproof base, padded elbow wings for added comfort, and a built-in handle and strap for easy transportation. The Lightweight Tactical Shooting Mat has been developed using rugged 1000 denier nylon and high-density closed-cell foam for the ultimate in durability and comfort.
Customers can now place their orders through the Elite Survival Systems website, www.elitesurvival.com, where they can also find additional product information, specifications, and customer reviews.
This is the new 5.56 Suppressed Rifle Pull Through Kit by Pro-Shot Defense which is designed specifically for use with suppressed rifles.
It includes mil-spec CLP, patches, Tactical jag, quick pull through system with brush and mop head, and a suppressor pull through cable which doesn’t get caught in the baffles when you insert it. Naturally, there’s also a PALS compatible carrying case.
The K-SPEC BCG combines multiple key features focused on increasing the reliability of your AR15 style firearm no matter if you are running suppressed or unsuppressed, and regardless of conditions. The K-SPEC is a truly plug and play BCG that will accommodate whatever configuration your mission requires.
For those running suppressed, the K-SPEC requires no additional tuning or tweaking of the gas or recoil systems to run reliably. Like all KAK BCGs, the K-SPEC is machined to the M16 full auto profile.
Both the K-SPEC Carrier and K-SPEC Bolt are backwards compatible with all standard mil-spec BCG components. The K-SPEC bolt can be used in any AR15 style direct impingement system, and the K-SPEC Carrier will function perfectly with any standard AR15 bolt.
Because we manufacture our BCG components in house and do not rely on outsourcing, KAK is able to offer the K-SPEC complete BCGs and components in over 50 combinations from 5.56 NATO all the way to .458 SOCOM, in multiple finishes, and left-hand versions as well.
? Slotted Angled Carrier Rails
For enhanced functionality in adverse and rugged conditions such as sand, mud, dirt, and grime. These rail cuts are designed for debris disbursement, resulting in ultra-high functionality in the toughest conditions, including suppressor fouling and foreign contaminates. Strategically located angle cuts in the rails result in fouling and debris being moved into noncritical areas that are not in contact with the receiver and do not affect the function of the firearm.
? Downward Gas Vents
In an effort to reduce the amount of debris and gas vented towards the shooters face, the two standard gas relief ports have been relocated from the ejection port side of the K-SPEC carrier and placed underneath, in the magazine feed lip channels. Two additional emergency relief ports have also been added to the bottom of the carrier to mitigate structural damage in the event of a case head separation. Testing has shown that venting the gasses through the magazine well has no negative impact on the feeding or function of the magazine nor ammunition, and any added heat is negligible. A quick side by side comparison video of a standard BCG and the K-SPEC BCG can be viewed HERE. *Note, standard BCG on top (lots of gas to face) and K-SPEC BCG on bottom (no gas to face).
Dual ejectors
The K-SPEC dual ejector system uses mil-spec ejectors and springs that require no proprietary parts. Ejector holes are centered on the lugs to avoid any reduction in strength of the bolt. The dual ejector system increases the ejection reliability and adds consistency to the ejection pattern. KAK Industry has been manufacturing dual ejector bolts for the AR10/LR308 platform for over a decade and has used that experience to create a durable and reliable dual ejector system for the AR15 platform.
KAK Industry K-SPEC BCG
Designed to function reliably in the toughest conditions
Optimized for both Suppressed and Un-suppressed use, All uses – All Conditions
Dual Ejectors for enhanced reliability
Angled Carrier Rail Cuts for flawless function in adverse conditions and prolonged suppressed use
Downward Gas Ports to reduce gas blowback to shooter
Full Auto Profile
Permatex added between Gas Key and Carrier Mating Surface
Carrier- 8620 steel, outside rails, bolt runs, and gas bores ground to .0002 tolerances, nitride finish
Bolt- 9310 steel, outside diameters ground to .0002 tolerances, MPI test, nitride finish
Firing Pin- 8740 steel, Swiss turned, heat treated, precision ground, chrome plated
Cam Pin – 4140 steel, Swiss turned, heat treated, nitride finish
Extractor- 4140 steel, fully machined, Phosphate coated
Extractor pin- S7 tool steel, ground, heat treated
Ejector- S7 tool steel, ground, heat treated
Gas key – 4130 steel, heat treated, secured with T25 torx fasteners, torqued to spec, staked with in house hydraulic staking machine.
Available for purchase on Friday Jun 23, 2023: kakindustry.com/k-spec-ar15-bcg-5-56-300-blackout
Machined in house and assembled using only the finest steels and components.
KAK Industry takes pride in producing some of the finest Mil-Spec/ Enhanced AR15 bolt carrier groups available, made 100% in house at our MO facility using Doosan machining centers, Tsugami Swiss turning, and the latest in FANUC robotics combined into an automated cell giving us lights out production capability. In house automated CMM Inspection processes ensure consistent quality.
The new Raider Rear Bag from Low Vis Gear can be tethered directly to your rifle thanks to the adjustable and stowable QD sling strap.
It’s manufactured by SORD from ATACS iX pattern 500D Cordura. The filling is Spexlite 5064 and the amount can be adjusted thanks to the food-away fill funnel.
www.lowvisgear.com/en-us/products/mk4-fox
Due to its scarcity, Black Hills Designs has created a precise reproduction of the the Rail Extension for the FN SCAR SSR.
Extending the top Picatinny rail, it is easily installed and adds 15 additional Picatinny slots of room.
Made from 7075-t6 anodized Aluminum and 17-4 Stainless Steel black oxide coating, it is compatible with FN SCAR 16, 17 and 20 rifles with barrel lengths down to 10?.
Conventional extended base pads primarily have a square or rectangular shape. Their designs mostly consist of flat or slightly angled surface areas on all sides and a flat section on the bottom. These designs are not ergonomic. They do not provide proper surface contact and feedback to the shooter during the reload sequence.
The advanced ergonomic design of the Grip Force EBP resolves all of these issues of conventional extended base pads.
The Grip Force EBP is the result of ergonomic evolution. When developing the Grip Force EBP, we studied the exact manner in how the human hand operates during a reload sequence. How the hand indexes the base pad and magazine in its pouch. How it wraps around the base pad and magazine body when removing the magazine. How it orients the magazine toward the magazine well, and how the hand functions when inserting, seating, and locking the magazine into the pistol.
The Grip Force EBP is designed to work with the hand naturally. The result is optimized speed and efficiency of the reload sequence.
FIT = FUNCTION
The EBP design allows for a faster and more consistent index.
The EBP fits the hand better, increasing feel and control.
The extended and contoured underside remains in contact with the hand during reloads. That continuous hand contact increases speed and efficiency.
The Grip Force EBP can be used on Standard (G17/G22) or Compact (G19/G23) sized magazines. The Grip Force EBP increases magazine capacity by +5 rounds of 9mm and +4 rounds of .40 cal.
Additional features include:
• Ambidextrous indented side panels enhance the operation for immediate action drills.
• A reinforced 3-pin locking bridge offers additional security against the base pad separating from the magazine body.
• The ergonomic shape of the EBP aids in concealed carry; the base pad design prints less underneath clothing.
• The ergonomic shape of the EBP offers an enhanced grip surface for compact (G19-sized) pistols.
• The EBP has a non-glare finish, suitable for MIL/LE duty use.
For more information, please visit our website.
The Axle is a concept design for pistol grip Emissary Development been working on for a while now.
The main features that they focused on implementing for the Axle are:
– fully wrapped proprietary texture.
– friction relief areas under the trigger guard and tang.
– raised thumbrests for a solid grip (something no other grip gets right in our opinion)
– optimized tang and grip geometry for the best trigger finger placement.
The model you see in the photo is a prototype and many features/details are subject to change as they continue to refine and improve the design.
