GORE-TEX Military Fabrics

US Army and Air Force Fire Support Specialists Form a ‘COLT’ at Combined Resolve XVI

December 15th, 2021

HOHENFELS, Germany — A two-person team of Airmen is dropped off by a Bradley Fighting Vehicle at the forward line of troops. They move down the line of cavalry scouts until they meet another small team, this one made up of U.S. Army artillerymen, who are dismounted from their own Bradley and are outfitting their rucksacks for an extended patrol. They are preparing to scout enemy positions, checking their radios and packing binoculars for a long patrol behind enemy lines.

The teams are part of the force-on-force exercise portion of Combined Resolve XVI, which includes approximately 4,600 armed forces service members from Bulgaria, Georgia, Greece, Italy, Lithuania, Poland, Serbia, Slovakia, Slovenia, Ukraine, United Kingdom and the United States. The operations are being conducted by integrated battalions with multinational units operating under a unified command and control element, allowing the U.S., its allies and partners to experience invaluable training alongside each other.

“Today we are going out as a COLT (Combat Observation Lasing Team),” said Senior Airmen Fernando Marquez, a Joint Terminal Attack Controller with 4th Air Support Operations Group. “A COLT team is basically the eyes on the ground when our sensor assets, which typically allows us to see far, cannot do the job. We have to push behind enemy lines, or in as far as possible with the enemy, so we can provide real targeting data for the brigade and division fires assets.”

The goal of COLT teams is to identify enemy targets, and, if possible, the teams will use laser targeting systems to mark targets for precision guided munitions. Joint teams of Fire Support Teams, known as FiSTers, and JTACs are best suited for providing COLT support to an Army brigade deployed in a combat scenario.

“Our mission is a list of high-value enemy targets,” said Sgt. Devon Eaker, a Joint Fire Support Specialist with 1st Battalion, 5th Field Artillery Regiment “Hamilton’s Own,” 1st Armored Brigade Combat Team, 1st Infantry Division. “I think I’m lucky to have the six guys total that we have right here. I’ve worked with these two JTACs before, and I’ve worked with the other three FiSTers a lot, and I can’t think of a better group of dudes to send forward to do this.”

FiSTers are the 1-5FA Headquarters and Headquarters Battery fire support officers, noncommissioned officers and enlisted joint fire support specialists responsible for identifying indirect fire, or fires, missions on the Combined Resolve XVI notional battlefield. FiST teams are attached to all of the multinational maneuver units operating during CBR XVI. This is an opportunity for these multinational units to experience the capability of the U.S. to provide close air support in joint operations.

“My fire support NCOs are organic to the field artillery battalion but are tasked out to each maneuver element,” said 1st Sgt. Michael York of HHB. “They are combat multipliers, and they enable the maneuver units to perform their mission by providing them with fires. So, if there is ever artillery, mortars or attack aviation getting called in, there is a fire supporter attached to that asset.”

Air Force JTACs direct the actions of aircraft while engaged in close air support. They can call in close air support from F-22s, A-10s, F-35s, or anything that the U.S. Air Force can provide air-to-ground operations.

“We’re fighting this new fight,” Marquez said. “We’re getting out of the COIN [counterinsurgency] mentality and moving into this new LSCO [large scale combat operations] fight. So, we are trying to shape the way we fight this new battle.”

Despite the proliferation of unmanned aerial vehicles in combat operations, both the Army and the Air Force continue to train and develop ground-force fire support teams. The force-on-force exercise held during Combined Resolve XVI at the Joint Multinational Training Center in Germany provides an excellent training opportunity for COLT.

“We’re essentially deep strike and reconnaissance,” Eaker said. “We get out there, forward of the FLOT, as close to the enemy as we can, see what’s coming and pitch it backwards. And if we can, we’ll kill what’s out there. We have access to aircraft via JTACs, fixed and rotary wing. We are in range of all artillery that the brigade has now through 1-5FA. With those combined, there’s not much out there that we can’t kill.”

The modern battlefield is shaped by UAVs directing cameras toward the enemy to gather intelligence. As the fight turns from terrorism to an enemy with more sophisticated electronic equipment and air defense, the potential disruption of UAV imaging is a very real threat. Well trained COLT teams ensure that U.S. Forces maintain the ability to penetrate enemy formations, identify threats and deliver fires munitions onto those threats, helping to maintain overwhelming firepower which is critical to victory on the LSCO battlefield.

To learn more about exercise Combined Resolve, follow: www.dvidshub.net/feature/CombinedResolve

By SSG George Davis

Shield Sights Announces the RMSx as the New Dedicated Competition Sight

December 14th, 2021

For Immediate Release – Dorset, England, U.K. – Shield Sights, Pioneer of compact red dot optics, is pleased to announce the RMSx as the new dedicated competition sight. The RMSx will replace the original RMS as the dedicated competition optic for Shield Sights.

With competitive shooting being at the core of Shield Sights foundation, the RMSx pulls from the experience of two generations of international competitive pistol shooting experience. The RMSx features a larger viewing window with a distinctive housing and parallax free and an all-new hard dip coated (HDC) polymer lens with a 5H hardness rating. The RMSx shares the same Shield footprint that can be found cut into the slide of many popular handguns and matches the entire RMS and SMS line of optics. The RMSx takes advantage of updated LED and electronic technology that produces increased reliability and longer battery life over a wide variety of conditions.

“Shield Sights started over 25 years ago by developing and manufacturing red dot sights specifically for the Competitive shooter. Over the years we have learned the competitive environment presents a completely different set of variables than are commonly found in other applications,” said James White, CEO Shield Sights “We feel the RMSx provides a perfect balance of features that will meet the needs of the most discerning competitive shooters.”

Features:
-80% larger viewing window
-Clear and parallax free HDC polymer lens with 5H hardness rating
-Low Profile lens for an intuitive co-witness to standard height sights
-Available in 8 MOA and 4 MOA dots
-Updated Electronics with faster refresh rate and better battery life

Dimensions:
-Lens Width: 34mm, 1.4”
-Base Width: 23mm, 0.9”
-Height: 23mm, 0.9”
-Weight: 19g, 0.67oz without battery

Optics are currently available for sale through the Shield dealer network or on the Shield website: www.shieldpsd.com

Savage Arms Adds 110 PCS to Bolt Action Lineup

December 14th, 2021

WESTFIELD, Massachusetts – December 13, 2021 – Savage Arms is proud to announce the addition of the 110 PCS (Pistol Chassis System) to its line of centerfire firearms. The 110 PCS is a bolt-action pistol built around the 110’s factory blueprinted action. This new pistol provides all the features that have come to define the Model 110, but in much more compact configuration.

“The Model 110 has set the bar high for bolt-action rifles,” Jessica Treglia, Senior Brand Manager for Savage Arms. “Now the adaptability and performance that we see from our flagship rifle line is available in a pistol chassis system. Don’t let the 110 PCS’s diminutive size fool you—we’ve taken this gun out past 500 yards with reliable, repeatable accuracy.”

Like other 110s, the 110 PCS has a user-adjustable AccuTrigger for a crisp, clean pull. The action is secured in a one-piece aluminum pistol chassis from Modular Driven Technologies (MDT) and the 110 PCS feeds from an AICS-style detachable box magazine. The 110 PCS is an ideal platform for anyone wanting long-range accuracy from a compact firearm.

Features:
• Carbon steel, matte black, barrel and receiver
• Medium-contour 10.5” barrel, with threaded muzzle (5/8-24)
• Machined aluminum, 1-piece chassis with 7” free floating modular forend with M-LOK™ slots
• 1-piece 0 MOA rail
• Left hand bolt, right hand ejection
• Spiral fluted bolt body
• 2.5-6 lb user-adjustable AccuTrigger
• Picatinny rail on rear of chassis
• Accepts most AR-15 pistol grips
• Barricade grooves milled into the front of the magazine well
• Ambidextrous magazine release and AICS Magazine

Part No. / Description / MSRP
57797 / 110 PCS 6.5 Creedmoor / $999
57798 / 110 PCS .308 Win / $999
57799 / 110 PCS 350 Legend / $999
57800 / 110 PCS 300 BLK / $999
57801 / 110 PCS .223 Rem / $999

SilencerCo Releases New Harvester EVO Lightweight Suppressor

December 14th, 2021

December 14, 2021 — West Valley City, UT — SilencerCo is excited to introduce the Harvester EVO, a lightweight suppressor designed for hunters and precision shooters. This product is the successor to SilencerCo’s Harvester 300, enhanced to include a few key features and currently available at SilencerCo Retailers

Accommodating calibers ranging from .223 REM to .300 WIN, the Harvester EVO is the ideal suppressor for .30 caliber bolt-guns and rifles. Consumer feedback on the previous Harvester models led SilencerCo engineers to make the EVO shorter, lighter, more affordable and ready to go right out of the box.

“The most impressive phenomenon of the Harvester EVO is it’s lightweight nature despite being created from rugged, hard-use materials,” said SilencerCo Senior Product Development Specialist, Dewie Vieira. “Weighing just 10.8 ounces, it is constructed of 17-4 heat treated stainless steel, inconel and cobalt 6 with a tubeless design. This gives the EVO an edge over other hunting suppressors.”

Not only is the Harvester EVO less likely to get caught on bushes and brush in outdoor environments, but it is capable of withstanding the most extreme conditions typically encountered by hunters and precision shooters.

Product Specifications:
-Rated for calibers ranging from .223REM/5.56NATO to .300 WIN
-Tubeless and extremely lightweight design
-Weighs 10.8 ounces
-Measures 6.24” in length
-Constructed with cobalt-6, inconel and 17-4 heat treated stainless steel materials
-Compatible with Bravo Mounting Accessories
-Ships with both a Bravo ½ x 28 and Bravo ? x 24 Direct Thread Mount
-MSRP of $680

For more information on the Harvester EVO, visit silencerco.com/silencers/harvester-evo. To find the closest SilencerCo retailer, click here.

Arisaka Bag Rider SL

December 14th, 2021

In September we told you about the Arisaka Stock Angle Adapter SL for use with Magpul SL and SL-S stocks which was inspired by Mike Olivella from Praecore Performance.

The Bag Rider SL is the next accessory for use with Arisaka Stock Angle Adapter SL which when attached, provides additional functionality with three important features:

1. Provides greater surface area for riding on top of rear rifle bags.

2. Provides a hooked rear surface to facilitate modern precision shooting techniques by providing the support hand a solid point of contact on the rifle stock.

3. Adds a bottom facing QD sling mount socket for competition use, allowing the user to attach a bag to the rear of the rifle quickly and easily.

arisakadefense.com/bag-rider-sl

Sitka Arrowhead WWP Half Bib Pant – MDW

December 14th, 2021

Fully Featured Gore-Tex Bib Pant Designed for Wet/Cold Weather Operations, Made in the USA

Rounding out the Wet Weather Protective (WWP) ensemble that launched the brand to market this spring, SITKA Arrowhead introduces the WWP Half Bib Pant – MDW as a COTS offering for Winter 2021.  

Intended for wet/cold environments the Half Bib Pant is made with Gore GTX 3L 40d Nylon Ripstop with DWR. Providing an optional WWP pant solution that enhances protection when the end-user is in a static position, specifically when deployed in the prone position conducting observation or support by fire tasks.

The integrated suspender system with laddered adjustability allows the end-user to dial in the fit for unrestricted movement and flexible torso sizing.  7/8 Side Zips have been added to allow for the ease of donning and doffing when wearing boots. Large front facing cargo zip pockets provide ample space for gloves & accessories and dump pocket capability.

Always focused on best-in-class materials to meet SITKA Arrowhead purpose-built design principles, the WWP Pant and Half Bib Pant MDW include reinforced insteps made with Trelleborg HANK™.

Trelleborg HANK™ is a flexible and extremely light weight High Abrasion Neoprene Kevlar, that belies the fabrics exceptional durability and waterproofness.

“We picked this particular textile for our instep because it proved to be lighter, more flexible, had great abrasion resistance and was more waterproof than any other instep reinforcement materials on the market. It complements the GORE-TEX textiles we use without feeling over built. “  

Eric GilmoreSITKA Arrowhead Creative Lead

Berry Compliant – Made in USA – Find your nearest dealer

TacMed Tuesday – Innovative Splinting in the Field

December 14th, 2021

The TacMed™ RISE™ is a low profile, rugged splint designed for extremity fractures and pelvic stabilization in the prehospital environment. Born from lessons on the battlefield, it can be intuitively applied under stress to create a straight splint, a 90-degree sprint, or pelvic stabilizer and be easily secured to the patient with items such as an elastic wrap or pressure bandages.

It features dynamic living hinges that allow the splint to collapse for maximum portability and kit space savings while easily form-fitting to the required shape and dimensions for proper upper and lower extremity splinting of fractures. Its one-of-a-kind design is made of a lightweight polymer capable of withstanding surface cleaning and harsh elements, including saltwater, while maintaining its rigidity and durability.

With its compact size, the RISE™ also fits into most individual first aid kits including all standard military-issued IFAKs.

Unique to the RISE™, multiple cutout slots provide you the capability to create a pelvic stabilizer when paired with a windlass or ratcheting tourniquet such as our SOF® Tourniquet. The Committee on Tactical Combat Casualty Care (CoTCCC) recognizes splinting and pelvic stabilization application as a critical step to prevent additional injury before moving a casualty.

Whether you’re on the battlefield or a responder here at home, the RISE™ is an advantageous addition to any IFAK for increasing your medical capability at the point of injury when needed most.

If you are interested in learning more about the RISE™, check it out here: tacmedsolutions.com/products/rise

Competitors Show Off Innovative Thinking at HACKtheMACHINE Unmanned

December 14th, 2021

SAN DIEGO – This year’s HACKtheMACHINE Unmanned competition, held Nov. 16-19, virtually brought together nearly 1,000 competitors in the first of a series of public-facing technology challenges designed to accelerate the U.S. Navy’s Unmanned Task Force, forging valuable partnerships between the Navy, industry and academia to create new, high-end unmanned capabilities.

Sponsored by the Office of Naval Research (ONR), this technology competition encouraged creative “hackers” to help meet the needs of the Fleet by developing and integrating unmanned and autonomous systems at scale.

Chief of Naval Research, Rear Adm. Lorin Selby, helped kick off the event, speaking about innovating in the Navy, including the notion of “the small, the agile, the many.” The idea behind that is they look at small, attritable autonomous platforms and build them quickly and at scale, to complement the larger, expensive platforms that form the bulk of the Fleet and Force. For more information about their new vision, read their press release: ONR Chief Unveils New Vision to Reimagine Naval Power.

“The centerpiece of my strategy to reimagine naval power as Chief of Naval Research is built on a few key themes. First, we are living in a time of incredible technological change, and we must meet the moment with bold action. Second, we will introduce the idea of Strategic Hedge against an alternative future. Third, we have a plan to synthesize the most creative and potentially game changing ideas of the last three decades into a plan of action,” said Selby. “Finally, we conclude with a call to action, which all begins with exploring digital challenges at HACKtheMACHINE.” 

Although participants competed virtually, event organizers and Navy personnel were on-site in San Diego to oversee and facilitate the competition, which was streamed live via YouTube and StreamYard.

There were three tracks for participants to compete in: Hack the Pilot, Detective Bot and Top Model. Each challenge fell into a different focus area – maritime cyber, data science and digital engineering, respectively – to appeal to a broad range of talents and skill sets. The Navy’s Cybersecurity Office (PMW 130) sponsored and developed the challenges for the Detective Bot track, as a way to pursue artificial intelligence/machine learning (AL/ML) tools that can distinguish benign from malicious code.

PMW 130 provided a dataset with thousands of malicious and benign code samples to see who can take inefficient AI/ML techniques developed with unlimited resources ashore and adapt them to efficient and effective cyber solutions on smaller afloat and autonomous platforms.

“The competitors at this year’s HACKtheMACHINE had to solve some really tough challenges,” said Mike Karlbom, PMW 130 Technical Director of AI/ML. “We were excited to welcome so many different participants, who were able to show off their data science skills and creative thinking in these tracks. This event shows the importance of bringing together smart people, from a variety of backgrounds, to drive innovation and collaboration.”

In the Hack the Pilot track, participants were provided with an auto piloting system and challenged to test and identify all vulnerabilities in the code base.

In the Top Model track, participants were given a set of mission goals and asked to build a simulation scenario of a wide-area search. Then, they created model-based solutions for defined situations within the created model. Finally, they determined whether their created solutions could outperform a heterogeneous collection of objects combatting the scenario.

Also at the event, PMW 130 announced the winner of their third prize challenge in the Artificial Intelligence Applications to Autonomous Cybersecurity (AI ATAC) Challenge series. The winner of the challenge and the $750,000 prize was Splunk Inc. (NASDAQ: SPLK), a data platform leader. Their submission, Splunk® SOAR, had the best performance based on the criteria of the challenge, which focused on enhancing the Security Operations Center using AI and/or ML tools to automate the detection and prevention of advanced persistent threats and other cybersecurity campaign activity.

A technology competition run annually by the Navy since 2016, HACKtheMACHINE events have been previously held in five cities nationwide: San Francisco, Austin, Boston, Seattle and New York. This year’s Unmanned challenge took advantage of a virtual setting and focused on AI/ML and digital engineering to accelerate the process of reimagining naval power.

The next HACKtheMACHINE event is scheduled to be conducted live in Miami, Florida in April 2022.

From Lily Chen