FirstSpear TV

Posts Tagged ‘LANTAC’

LANTAC – Precision Upgrade Trigger for Glock 17, 19 Gen 1-3 & Gen4 Pistols

Thursday, January 11th, 2018

The Ultimate drop in trigger for your pistol, the E-CTG9™ trigger can be configured for Carry (Self Defense) or Competition (Target) use and comes complete with our improved trigger spring kit so you can set the ultimate trigger pull on your handgun.

IMG_6040

The trigger housing features our SSR (Super Short Reset) 3.5Lb Connector that delivers the same trigger profile as the factory unit but is highly polished and re shaped to reduce friction and create a much smoother, lighter more consistent pull.
This connector makes super fast reset of the trigger possible, allowing for very quick follow up shots and reduced friction means less resistance for smooth operation.

Our Trigger Bar is manufactured from a proprietary blend of 420 Stainless Steel and polished to produce an ultra smooth hard wearing surface that reduced friction and trigger pull interference as it operates against the connector and internally against the pistol frame.

The included spring kit comes with the following parts to assist in reducing trigger pull further.

x1 4.0Lb Firing Pin Spring (For Target, Competition & Sporting Use)
x1 6.0Lb Firing Pin Spring (For Carry & Self Defense Use)
X1 6.0Lb Increased Power Trigger Spring
x1 Reduced Power Firing Pin Safety Spring & Ultra Smooth Safety Plunger.

Springs are manufactured from the highest grade piano wire and tempered for the best service life.

Each spring is calibrated to deliver consistent force through the entire compression cycle for reliable operation every time the pistol is fired.

With nearly 30% more power our Trigger Spring actually reduces the pull weight by as much as 1Lb.

The lower power Firing Pin Safety Spring reduces friction caused by the firing pin plunger engaging with the trigger bar and creates a much smoother operation of the parts.

The Triggers Pivot Pin and Trigger Bar position has been carefully considered to deliver maximum leverage with minimum force and the hybrid bow face is a perfect blend of curved and flat surfacing that delivers comfort with improved ergonomics and finger positioning.

The bow is precision machined from certified 7075-T6 aluminum and hard coat anodized Type3 Class2 Black.

Triggers are assembled in house and come with our lifetime warranty against defects in manufacture.

MSRP $185.00

www.lantac-usa.com

LANTAC – RAVEN LA-N15 Receiver Set

Wednesday, June 28th, 2017

LA-N15 SET right

LANTAC has released their new RAVEN LA-N15 Receiver Set. The set consists of the Upper Advanced Receiver and LA-N15 Lower, both made of billet 7075-T6 aluminum, and featuring a Milspec MIL-A-8625F Type3, Class2 Deep Black Hardcoat Anodized finish. The RAVEN set comes complete with the CP-R360 Cam Pin, which is machined from 17-4 PH stainless steel.

LA-N15 SET right

Specification:

Material: Certified Aerospace Billet 7075-T6 Aluminum
Finish: Milspec MIL-A-8625F Type3, Class2 Deep Black Hardcoat Anodize.

Upper:
Super smooth burnished Bore.
M4 Feedramps as standard.
Blended Smoothcam system.
Includes CP-R360 Domed Head Cam Pin.

Lower:
Internally flared magwell
Tapped rear detent hole.
Spotface takedown pin area.

www.lantac-usa.com

Sneak Peek – LANTAC Optical & Accessory Mounting

Friday, December 30th, 2016

Introducing OPTAC, Optical & Accessory mounting from LANTAC for the Aimpoint T1/T2.

The clamp system uses a floating tension arm that can be adjusted after the mount is clamped in place. 7075-T6 Chassis and 17-4 PH Stainless Steel working parts.

OPTAC will be on display at SHOT Show.

Lantac USA Halloween 2016 Special – Teaser Part 2

Saturday, October 29th, 2016

Darryl’s journey takes him deeper into the woods and after finding shredded, blood soaked clothing, he is beginning to think he should not have gone out alone.

www.lantac-usa.com

Lantac USA – Halloween 2016 Special

Friday, October 28th, 2016

For the last six months on every full moon Darryl looses cattle to horrific mutilations. Now pushed to the limit he has taken matters into his own hands and is on the hunt for the cause of his troubles.

www.lantac-usa.com

First 50 LANTAC LA-R15 Intermediate Raven Rifles to be Offered Exclusively at Cabela’s

Friday, July 8th, 2016

First ever shipment of new, state-of-the-art rifles available through Cabela’s July 7, 2016

FORT WORTH, Texas (July 7, 2016) – LANTAC™ USA LLC, Fort Worth TX., will make the first ever shipment of 50 of the company’s new LA-R15 14.5” Intermediate Raven™ rifles available exclusively at Cabela’s for a limited time beginning Thursday, July 7th. These highly anticipated sought after, state-of-the-art rifles will be offered through Cabela’s before they hit the market anywhere else in the world.

LanTac’s LA-R15 14.5” Intermediate Raven is the first ever AR modern sporting rifle with the company’s patent-pending Adjustable Buffer System and proprietary buffer spring. Each rifle is comprised of premium parts and accessories, including hand-lapped, stainless steel barrels; billet 7075-T6 certified lower and upper receivers with Type III, Class II black anodizing; and LanTac’s UCT EXO NiB coated Enhanced Bolt Carrier Group (E-BCG™) with forward porting, flared tail carrier and Carpenter 158 bolts.

Additional features like the state-of-the-art, world-leading, pinned and welded LanTac DGN556B™ Dragon™ Muzzle Brake; a MPI tested bolt; and LanTac Curved Bow, CMC Triggers 3.5-lb, E-CT1™ single-stage drop-in trigger system, allow the LA-R15 14.5” Intermediate Raven to offer zero muzzle rise and a massive reduction in felt recoil, in a fast, flat-shooting and accurate rifle.

The LanTac LA-R15 14.5” Intermediate Raven rifle is manufactured to the highest quality standards and assembled by a skilled team of rifle builders. Each rifle is shot tested at LanTac’s facility, treated with FrogLube™ and comes with a lifetime warranty against defects. Visit www.lantac-usa.com for more information.

Boy, It’s Getting Crowded In Here, Meet The LANTAC Keyed Accessory Mounting (KAM) System

Tuesday, March 17th, 2015

The Picatinny (Mil Std 1913) attachment has been with us for some time.  Over the past few years, it’s been joined by Key Mod and M-Lok.  Now, LANTAC has thrown their hat into the ring with the license free Keyed Accessory Mounting (KAM) System taking us beyond any  BetaMax/VHS analogies.

Thanks to their adapter plate system, LANTAC claims KAM will attach to round surfaces such as tubular handguards in addition to flat surfaces.  What’s more, the mount itself is 100% integrated and only applies force to the mounting surface.  

Interested in using KAM? Contact info@lantac-usa.com