![PTT Clamp](https://ssdaily.tempurl.host/wp-content/uploads/2012/11/PTT-Clamp-440x293.png)
Generally, members of SOF units are only issued one or two Push-to-Talks (PTTs) that have to be interchanged between three or four different sets of kit. On top of this you also have to deal with different camo patterns. And then, there’s the actual mounting based on operational preferences and unit SOP. Some guys like to wear their PTTs on the right or left side, some times with the buttons facing out and some times with the buttons facing in. Standard PTT clips don’t allow for all these variations nor do they make it easy to interchange the PTTs between different carriers so most guys end up with zip ties or rubber bands to get what you need out of their PTT.
![PTT Clamp_MOLLE](https://ssdaily.tempurl.host/wp-content/uploads/2012/11/7-PTT-Clamp_MOLLE-440x293.png)
MATBOCK’s patent pending “PTT Clamp” addresses these problems that confront one of the most important parts of combat, communication. The PTT Clamp was designed so that users can mount a clamp to every carrier, either by Velcro or MOLLE. The PTT Clamps are prepositioned on each carrier to eliminate tinkering with gear, allowing the Operator to simply and securely fit the Push-To-Talks into the Clamp on each set of gear and route the wires.
![PTT Clamp_MOLLE](https://ssdaily.tempurl.host/wp-content/uploads/2012/11/8-PTT-Clamp_MOLLE2-440x494.png)
The Nexus PTT is very popular throughout a lot of SOF units, but these PTTs are prone to being inadvertently depressed. Consequently, MATBOCK designed the PTT Clamp – Nexus model with an “anti-hot mic” cage that will significantly reduce the chance for button being depressed.
Made in the USA, Hydrographic Kydex is available in Desert Digital, Woodland Digital and MultiCam.
![PTT Clamp_LBE](https://ssdaily.tempurl.host/wp-content/uploads/2012/11/4-PTT-Clamp_LBE-440x293.png)
MATBOCK PTT Clamp.pdf
Be advised orders will not ship until 15 Dec while MATBOCK builds inventory. However, they wanted to ensure this product was out before the end of November so customers could receive their exclusive Soldier Systems 10% discount. The 10% discount (code SSD10) will expire at 0001 EST Dec 1st 2012.
www.matbock.com/products/accessories/pttclamp