GORE-TEX WINDSTOPPER

Archive for 2013

AUSA – Revision Prowler

Wednesday, October 23rd, 2013

REV1709_AUSA_PROWLER_POSTER v6

Revision is committed to developing next generation Soldier protection. Two key technology programs that were launched at AUSA this year are the ‘Advanced Head Protection System (AHPS)’ and the ‘Prowler Human Augmentation’ system.

The AHPS is a rifle round stopping helmet, with full maxillo facial protection, integrated electronics, integrated heads up display to Android, and pneumatic liner system that meets the new 14.1 fps impact requirement. The AHPS was developed in concert with the US Army Labs Natick.

The Prowler, is Revision’s Human Augmentation device. It increases a soldiers metabolic reserve while preventing short and long term injuries. The Prowler allows our soldiers to be more lethal on the objective while increasing deployability through reduced injury. The Prowler, has been tested by SOCOM and CANSOFCOM, and is under contract with the US Army Labs Natick. Shown to provide a 33% mechanical advantage, the Prowler proves to be the next human augmentation system.

Both systems are continuing to be innovated in support of several DoD and international programs as well as SOCOM’s TALOS program.

www.revisionmilitary.com/

AUSA – BRP

Wednesday, October 23rd, 2013

20131023-084610.jpg

This is a sneak peek of the Scarab from Bombardier Recreational Products. Look for more info soon.

ESS Eyewear | ADS TV | AUSA Expo 2013

Wednesday, October 23rd, 2013

Mike Viqueria from ESS Eyewear stops by to talk with ADS TV about the brand new Rollbar featuring interchangeable ballistic glass lenses.

Visit ADS for more information.>

AUSA – H&K

Wednesday, October 23rd, 2013

20131022-175443.jpg

H&K is always rolling something new out but we thought this new holster for the MP7 might pique your interest as much as it did ours.

20131022-182101.jpg

But, let’s start with the MP7 itself. You may notice a few differences. One obvious item is the color. H&K now offers most of their models in Tan. Additionally, the MP7 now incorporates a 3-position stock rather than the old, in-or-out version. You may also notice that there is a notch in the Picatinny rail. This is for the holster and it is on either side’s rail for right or left handed use. This new Mil Std 1913 rail section is also reinforced. When mounting to the MP7 a metal insert is placed behind the barrel shroud and two additional screws are used in order to need up the rail that will bear the weight of the holstered weapon. H&K told me that they are also introducing a new forend that eliminates the fold down foregrip and instead features a removable 6 o’clock rail section.

20131022-182414.jpg

This is the drop leg holster. It is injection molded and features three (!) leg straps for stability. The release lever at the top can be pushed forward or rearward making the holster ambidextrous. Additionally, due to the holster’s design, the weapon cannot be mounted to the holster unless it is safe or semi-auto. If the weapon’s selector lever is set to full-auto, it will not mate to the holster.

20131022-182444.jpg

There is also a belt mounted version (not shown) as well as a vest mounted holster. As you can see, one side features PALS webbing. The magazine carrier is mounted to the vest via a PALS panel of pile tape offering more customization based on individual preference.

20131022-182628.jpg

The vest model crosses in back like a traditional shoulder holster and attaches to the trouser belt on either side for stability.

20131022-182806.jpg

As for the actual attachment of the MP7 to the holster; here it is, mounted. To holster the MP7, the bottom of the reinforced Picatinny rail is inserted into the recess in the holster and then it is rocked toward the holster into place so that the catch will engage. Due to this design, even with a mounted suppressor, the MP7 will still fit right to the holster.

20131023-064054.jpg

www.hk-usa.com

If The Army Adopts OCP Will The Air Force Follow Suit?

Wednesday, October 23rd, 2013

At this point it has become glaringly obvious that the US Army is adopting the Operation Enduring Freedom Camouflage Pattern developed by Crye Presicion and known commercially as MultiCam. The question now is whether the other services follow their lead? Elements of USSOCOM were already wearing MultiCam when the Army adopted it for use in Afghanistan in 2009. The Air Force also jumped on the OCP bandwagon, issuing it to all OEF bound Airman. Additionally, ahead of their Army counterparts, USAF Battlefield Airman are wearing MultiCam during stateside training and in some cases as a garrison uniform. Already in DoD, MultiCam abounds.

20131022-203055.jpg

From the very beginning of the Camouflage Improvement Effort the Air Force has monitored the Army’s progress and unofficially signed on as a stake holder. While there has been no announcement from the Air Force (or the Army for that matter) on the future of their camoflauge program, we believe that they will adopt OCP shortly after the Army (and hopefully get rid of that abomination of a uniform in the process, the so-called Airman Battle Uniform). The government source who informed soft goods manufacturers that the Army would slowly transition to OCP earlier this week at AUSA said as much. So that puts the Army, the Air Force, and the majority of USSOCOM in MultiCam, leaving our maritime forces as the odd man out. But will pending legislation for a common camouflage uniform be enough to persuade the Navy and Marine Corps to go along with the crowd?

A Blast From The Past

Wednesday, October 23rd, 2013

20131019-211623.jpg

Did you read this book like I did? If so, did you know that the Casca images by artist Darrel Millsap on the cover of every title were based on this photo of author Barry Sadler?

20131019-211742.jpg

And, did you know that Special Forces Veteran Barry Sadler also wrote and performed the song “The Ballad of the Green Berets” which hit Number 1 on the charts in the Spring of 1966?

20131019-212153.jpg

Sadler passed away in 1989 of complications following a gun shot wound. Although, the Casca-series of books are still being produced.

US Army Camouflage Improvement Effort – A Soft Launch?

Tuesday, October 22nd, 2013

I’ve heard lots of rumors concerning Army camouflage but late this afternoon at AUSA I was approached by several soft good companies that they had been informed, off-the-record, by a Government source close to the program that the US Army would indeed adopt OCP as its camouflage pattern. The source of this information is very reliable. Apparently, the companies were informed to help assuage uneasiness in the industrial base.

The source confirmed that the Army was unwilling to make an official announcement at this time due to the federal government’s current budget woes. The party line remains that it just wouldn’t look right to give the appearance of spending money so recently after the shutdown.

However, according to the information received by SSD, the Army will eventually make an official announcement and plans to begin fielding OCP to new accessions beginning in FY15 with uniforms for the rest of the force starting in FY16. According to the source, the reason for the delay is that the Army plans to tweak the colors in the pattern slightly. Interestingly, the source also claimed that the Army would have access to the woodland and arid environmental patterns as well.

When asked about the time gap until the new patterns are fielded and the requirement for the Army’s incumbent UCP, the source answered that analysis indicated that there were enough uniforms already in stock or on order to support the force except for some odd sizes based on current demand models.

I’m glad to hear that there are some moves being made behind the scenes but I wish the Army would just cut the cloak and dagger and announce a plan. Purchasing additional ACUs in UCP is just a waste since they plan on replacing them. Make the announcement now and speed up the timeline.

HDT Global | ADS TV | AUSA Expo 2013

Tuesday, October 22nd, 2013

Jeff Pufahl from HDT Global shows ADS TV the Containerized Weapon System (CWS).

The CWS is a Tricon container optimized to provide rapid organic direct fire-power support for Combat Outposts, Forward Operating Bases, Ports, Lodgements and Shipboard-defense applications.

Visit ADS for more information.