January 2019 | Soldier Systems Daily Soldier Systems Daily

Archive for January, 2019

The AAC Jaeger, Not Just a Silencer but an Experience Enhancer

Monday, January 14th, 2019

Huntsville, AL – The Jaeger 30 was designed to provide hunters with superior sound and recoil reduction when used on single-shot or bolt action rifles chambered up to 300 Win Mag.

The Jaeger 30 features a Grade 9 Titanium mount and blast chamber. The outer tube and monolithic core are machined from 7075 T6 Aluminum. The black anodized Titanium mount is the strongest component of the silencer, it carries the serial number and data panel. The 5/8-24 threads of the Jaeger 30 are compatible with the majority of .30 caliber hunting rifles found in today’s marketplace. The 7075 T6 Aluminum tube and monocore are finished with Type 3 hard coat anodize.

The Jaeger 30 can reduce to below 140 dB the sound pressure that results from the discharge of some of today’s most popular 30-caliber cartridges (e.g. 300 WM, 308 WIN, and 300 BLK)*. All this is accomplished by only adding 13.9 oz and 9 inches to your rifle’s overall length. The Jaeger 30 truly packs a lot of performance into a small, lightweight, and affordable package.

*Sound pressure level may vary based on various factors including but not limited to caliber, barrel length, and ammunition selection.

Posted in Press Release, Suppressors | Comments Off on The AAC Jaeger, Not Just a Silencer but an Experience Enhancer

Tactical Pro Shop Announces Quick Service, Small Batch Patch Production

Monday, January 14th, 2019

Tactical Pro Shop, LLC. (Burbank, CA) is rolling out an impressive new capability, just in time for the procrastinators among us. They have the capability to produce small batch morale and company patches with amazing detail and speed. They start with a patch size chosen from their available blanks, and print your image / logo / meme on it, in full color and get them to you in time to have them on your badge holder or product display on the SHOT show floor. Patches arrive with velcro attached and ready to go.

They also have the capability to produce your design in larger volumes (not feasible in time for SHOT). But their rapid capability is truly mind-blowing. (I once made a joke on facebook, and Matt sent me a picture of a finished patch in less than 45 minutes).

You need to have a vector file of your image (Adobe Illustrator or Corel) and think it will look good on one of their available blanks. And you need to stop dragging your ass and email mattk(at)tacticalproshop.com for ordering details right now. And prepare to have your socks knocked off!

Posted in Morale, Press Release | 1 Comment »

BE Meyers & Co Announces Growing Distribution Network

Monday, January 14th, 2019

SEATTLE, WA (January 13, 2019) – B.E. Meyers & Co., Inc. is proud to announce the recent additions of Curtis Blue Line, Green Line Tactical, KF Armory, LLC, N.S. Defense, and Victory First as official resellers. These companies are joining B.E. Meyers & Co.’s nation-wide network providing advanced laser and solutions with a focus on federal, state, and local law enforcement, as well as commercial markets. B.E. Meyers & Co. also has extensive international representation in Canada, Europe, the Middle East, South East Asia, and Australia.

“The welcome addition of our new Resellers represents a necessary broadening of our partnership approach with excellent small businesses that are able to promote B.E Meyers products into our valued customer base,” said Jamie Wilford, B.E. Meyers & Co.’s Director of Global Business Development.

B.E. Meyers & Co. is proud to work with the following US resellers:

AARDVARK
ADS., Inc.
Brownell’s
Curtis Blue Line
ECI Defense Group
Esoteric, LLC

Federal Resources
Green Line Tactical
Hurricane Butterfly LE
JJ Rock Co.
KF Armory
Larson Firearms
Mile High Shooting Accessories
MOD Armory
N.S. Defense
Noveseke
OP Tactical
Operational Detachment Source
Proven Arms & Outfitters
Quantico Tactical
Ridgeline Defense
Surplus Ammo & Arms
Tactical Night Vision Company
Tidewater Tactical
TSSi
Unifire, Inc.
Victory First
W.S. Darley & Co.
Weapon Outfitters

As a 44-year family business now in its second generation of leadership, B.E. Meyers & Co. Inc. has maintained an end-user focus while continually innovating in the design and development of advanced photonic solutions.

B.E. Meyers & Co. Inc. is an ISO 9001:2015 certified facility located in Redmond, Washington, with all products made in the USA.

www.bemeyers.com

Posted in Advertiser, Press Release | Comments Off on BE Meyers & Co Announces Growing Distribution Network

Meet JOE

Monday, January 14th, 2019

Yesterday, I found out why the Parachute Regiment refers to its troops as “Joe.”

Meet JOE.

In 1942 the PARAs were formed from soldiers already in the Army. The volunteers on transfer had their documents stamped with the letters J.O.E, standing for ‘joined on enlistment’. New members of the Regiment today are still refered to in this way.

It helps to place everyone on the same footing, building a cohesive team and family. Joe is genderless, doesn’t have a sexuality, finacial history, race, religion or come from a certain background. Joe is equal.

Posted in Forces Focus, History, International, Parachuting | 14 Comments »

PS Magazine Reminds You To Keep The Anti-Reflective Device On Your M68 Close Combat Optic

Monday, January 14th, 2019

This is a public service message from the Army’s very own PS Magazine.

Soldiers often remove the M68 Close Combat Optic’s (CCO) reflective sight’s anti-reflective device (ARD) because they think they can sight better without it. Then, of course, the ARD goes missing.

Does this make the M68 NMC?

Yes. Step 10 of the PMCS in WP 0012 in TM 9-1240-413-13&P (May 13) says if the ARD is missing or damaged, the M68 is NMC.

Leave the ARD on for two very good reasons:

1. The ARD prevents a reflection from signaling your position to the enemy. That could mean the difference between life and death on the battlefield.

2. The ARD protects the M68’s lens from scratches. If the lens becomes too scratched, you can’t see through it and the sight does you no good.

Units should emphasize to Soldiers they shouldn’t remove the ARD in the field. Armorers can order replacement ARDs with NSN 6650-01-479-5386. They cost a little more than $40.

Posted in Guest Post, Optics | 9 Comments »

Propper EdgeTec Collection

Sunday, January 13th, 2019

Featuring100% poly ripstop fabric, Propper’s new EdgeTec collection prevents wrinkles and holds up against everyday demands.

Available in men’s and women’s styles, EdgeTec pants (starting at $29.99) come in three pocket configurations: Slick, Tactical, and EMS. The men’s Slick short retails for $24.99. The polo ($34.99) is also offered in men’s and women’s styles in a snag-resistant, soft-touch, anti-odor material to help keep the stink out on long, hot tours.

EdgeTec will officially debut at SHOT Show and should be available for order near the end of January, but you can get a sneak peek here.

Posted in Advertiser, Clothing | 1 Comment »

New Paddle Attachments Now Available from Bravo Concealment

Sunday, January 13th, 2019

Bravo Concealment, has just announced their NEW Product Release making Concealed Carry soooo much easier.

Polymer Injection Molded Paddle Attachments:
These attachments convert your OWB gun holster and magazine pouches into a quick “on and off” paddle holster. Imagine not having to thread your belt through the holster belt loops anymore. Just slip your gun holster over your belt, it’s that simple. These Paddle Attachments hold on to dear life and will not let go until you decide otherwise. Comfortable to wear all day long, these attachments make your everyday concealed carry lifestyle easy.

Made out of a robust polymer blend, these attachments are tough and durable for long lasting and are lightweight for extreme comfort.

Easily attaches to your gun holster or magazine pouches by swapping out the standard belt loops and installing the Paddle Attachments with a regular Philips screw driver.

• Sold in pairs
• Hardware Included
• Accommodates belt sizes: 1.25″ and 1.50″
• Accommodates to all 3.0 and second-generation gun holsters
• Accommodates to Bravo Concealment mag pouches.

Specs:
• Paddle Attachment Dimensions in Inches:
(Length: 4.375 = 4 3/8) (Width: 1.625 = 1 5/8) (Height: 0.875 = 7/8)
• Hole Spacing: 0.625″

As always, our Paddle Attachments come with an ULIMITED LIFETIME WARRANTY, 30-day Monday Back Guarantee, all while offering Free Shipping.

The Paddle Attachments are available now with a MSRP of $23.89. Get yours NOW as they pulled price down to $19.89 with an introductory special!

Posted in Holsters, Press Release | Comments Off on New Paddle Attachments Now Available from Bravo Concealment

And Some People Want An Hour Long Meeting

Sunday, January 13th, 2019

Make those minutes count.

Posted in SHOT Show | 9 Comments »