TYR Tactical

Author Archive

The ETHOS Package From Overwatch Precision

Thursday, March 2nd, 2017

ETHOS

Our ETHOS.

The ETHOS handgun modification package is designed from the ground up to be a fighting handgun. We’ve taken a venerable platform and tweaked it to meet our extremely high standards.

The grip is stippled to ensure secure purchase during long strings of rapid fire, with hands that are wet or bloody, or when dexterity is compromised by cold weather or gloves. We optionally remove finger grooves to fit the grip to our client’s hand, not the other way around. Additionally, we undercut the trigger guard to allow as high of a grip as possible, for greater recoil control without the discomfort of the infamous “Glock Knuckle” experienced by many with a stock trigger guard.

The ETHOS slide has been expertly milled by ATEi, and in keeping with their reputation they have turned every unused surface of the boring, factory rectangle of steel into an advantage. The muzzle end is narrowed and bullnosed to allow ease of re-holstering, while the enhanced forward cocking serrations do not extend across the frame rail channel where strength is of paramount importance. the forward cocking serrations, in conjunction with ATEi’s signature fish scale top serrations (developed in partnership with Steve Fisher of Sentinel Concepts) allow the end user the same confidence that our stippled grip does; any weather, any malfunction, one hand or two, the job will get done.

The ETHOS RMR cut is also done by ATEi, and is made-to-measure with recoil bosses for a specific RMR housing, providing a level of fit and optic protection not seen elsewhere in the industry. The slide is finished in QPQ (Black Nitride) to prevent corrosion and harden the surface of the steel. Optional cerakote is available, but will never be substituted for the QPQ, we don’t take shortcuts.

Naturally, the ETHOS comes with our tigger, tuned up and installed for a trigger press even cleaner and crisper than our drop in kits.

  • 360 Degree Stippling for a secure grip in adverse conditions
  • Magazine Scallop (Gen2/3 Only)
  • Optional finger groove removal for enhanced ergonomics
  • Trigger guard undercut for better recoil management and comfort
  • Enhanced forward and rear cocking serrations, with top serrations for easy one or two-handed manipulations under the worst of conditions
  • Bullnosed Slide for ease of reholstering
  • Tuned Overwatch trigger of your choice
  • Made-to-Measure RMR cut, backed up with all black suppressor sights
  • QPQ (Black Nitride) metal finish with optional Cerakote on slide, frame and trigger
  • Available with a variety of add-ons

    As always, Overwatch Has You Covered with a transferable, unlimited lifetime warranty on all of our work and products.

  • High Speed Gear At IWA 2017

    Thursday, March 2nd, 2017

    IWA17

    NUREMBERG, Germany – High Speed Gear® will participate in IWA OutdoorClassics 2017 from March 3-6. The HSGI® team will be in Hall 9, Booth 9-236.

    IWA is one of Europe’s largest and most comprehensive trade shows for the tactical, hunting and shooting sports industries.

    HSGI’s® booth will include a wide variety of gear, including numerous new and unreleased products, for visitors to handle and learn about.

    Anyone unable to attend can visit www.facebook.com/highspeedgear and www.instagram.com/highspeedgear for updates.

    For information about IWA OutdoorClassics, visit www.iwa.info/en.

    www.highspeedgear.com

    SureFire – Field Notes Ep. 8, Vehicle Tactics with Aaron Barruga

    Thursday, March 2nd, 2017

    SureFire Field Notes is a multi-segment informational video series with tips and techniques from subject matter experts of all backgrounds. In this episode, Aaron Barruga of Guerrilla Approach discusses low-light vehicle tactics.

    Guerrilla Approach:
    guerrillaapproach.com

    Filmed and edited by Eugene Nagata of Kiri Studios.
    www.kiristudios.com

    B-roll from Silent R Productions.
    www.silentr.com

    www.surefire.com

    Ruger Muzzle-BrakeTM Knife by CRKT

    Wednesday, March 1st, 2017

    The Muzzle-Brake has elements from a traditional bowie design but is developed with the construction techniques of today. With its stout full tang blade it can be used as a chopper in camp or fashioning a quick shelter in the forest if needed. Its clip point blade shape, featuring a blood groove, is perfect for making quick work of butchering an animal after a successful hunt. The handle is glass filled nylon construction that wraps around a thick blade tang. The sure grip surface matches the Ruger American Rifle® series texture with Ruger® eagles embossed into both sides of the grip.

    The Muzzle-Brake is part of the exclusive Ruger® knife line; the line includes designs for everyday carry, hunting, and self-preparedness. The knives are crafted in varying sizes and finishes, with an assortment of blade edges. Developed by six master knife-smiths who combined their knowledge of the art with aesthetic details from Ruger® products, the line offers unique knives with the important features that every good knife should have. These knives are purpose built to be durable and highly functional in the environments where Ruger customers will expect them to perform.

    CRKT_Ruger_Muzzle-Brake-open-front-hi-res

    Ruger® Muzzle-Brake
    Model Available:

    Ruger® Muzzle-Brake (R2501) – $99.99

    For more information on the Muzzle-BrakeTM or the entire Ruger® product line go to www.ruger.com/crkt.

    Founded in 1994, CRKT® is the industry’s premier brand of knives, tools, and lifestyle accessories, with a reputation for
    innovative design. For more information, call: (800) 891-3100, email: info@crkt.com, on the web: www.crkt.com.

    Magpul Releases New Field Cases For iPhone 7 and 7 Plus

    Tuesday, February 28th, 2017

    Magpul has just released models of their ever-popular Field Cases for the iPhone 7 and 7 Plus. The Magpul Field Case is a semi-rigid cover for smartphones which provides basic protection for the device. The Field Cases feature PMAG-style ribs for grip, and easy on/off snap-on design, and they slide easily into pockets without snagging.

    Both cases are currently available in Black and Olive Drab, with the iPhone 7 case also available in FDE; more colors to follow soon.

    seven

    www.magpul.com/products/magpul-field-case-iphone-7

    7plus

    www.magpul.com/products/magpul-field-case-iphone-7-plus

    Bullet-Proof Origami Shield

    Monday, February 27th, 2017

    Mechanical engineers at Brigham Young University created a man-portable and lightweight bulletproof shield that was inspired by origami. The shield is flat when stowed, but quickly folds up to an encompasing shield made of 12 layers of Kevlar fabric.

    In testing the barrier was capable of stopping loads upwards of .44 Magnum, making it roughly equivalent to Level IIIA body armor in protective capability.

    While there’s likely still some development to undergo before this becomes a fully-realized product, it shows great promise, especially if the positive response from the Law Enforcement agents testing the device is anything to go by.

    FIME Group – Rex Zero 1 Product Announcement

    Sunday, February 26th, 2017

    FIME Group has announced new information on the Arex Rex Zero 1, the Slovenian-manufactured P226-inspired handgun, including the release of a new compact model, as well as its introduction to the Maryland handgun roster.The full release can be read below:

    FIME Group Product Announcement
    Have you heard?! FIME Group has 3 important announcements for the Rex Zero 1!

    1. The Rex has a new model, the Compact.
    2. We went through the hoops so our Marylanders can protect themselves. Rex Zero 1S is now on the Maryland Roster. Maryland Part Numbers: REXZERO1S-04, REXZERO1S-05
    3. With all the demand from our magazine restricted states, we have a 10 round magazine coming shortly.

    Arex is located in Slovenia and has over 20 years of design, manufacturing, and CNC experience. When Arex was designing the Rex Zero 1, they knew this was going to be one of the best pistols around. Rex is actually Latin for King. With all the recent reliability/torture tests, it has proven to be an accurate name.

    rexzero1scpfde

    Rex Zero 1 is manufactured out of T7075-T6 Aluminum with full length rails, full length dust cover, an integrated picatinny rail, and a 1 piece cold hammer forged barrel made from a solid bar stock. The parts are then Nitrocarburized to protect against corrosion and wear. The Rex was designed for hard use with expected 30,000 rounds of service life and has passed extensive NATO/Slovenian military based tests.

    rexzero1cpfde

    The controls match the well-engineered frame. They feature an ambidextrous magazine release and safety lever. The Slide stop/Decocker lever are integrated into one. Pushing up on the lever is the slide stop, press down will release the slide, press down again and it will decock the hammer. Field strip can be accomplished without pulling the trigger. You can run this in Double Action/Single Action or Single Action Only. If it is your preferred carry, it can be “cocked and locked”. Double Action trigger pull will be 13 pounds, while the single action trigger pull is going to be 5 pounds. The trigger will reset with only .16” of travel.

    mrex171510

    Magazines come in 3 different sizes, 15 rounds and 17 rounds, and the new 10 round magazine (coming soon) for the states that have restrictions. We believe everyone should have their ability to protect themselves, even the ones that are unfortunately in the restricted states. The 10, 15, 17 round magazines will work for Compact. Only the 10 and 17 round magazine will work with the Standard. The best part is the MSRP on the magazines are $25. This allows you to stock up on magazines, a great price for spares or if you need them for an upcoming class. Make sure you pick up a few more.

    stats

    Do you want some videos on the Rex Zero 1? What would you like to see from us? Send your suggestions to Info@FIMEGroup.com.

    ###

    ABOUT FIME GROUP, LLC
    FIME Group, LLC is a manufacturer, importer, and exporter of the finest, high-quality firearms from around the world. Founded with the mission to manufacture the finest firearms and establish long-lasting business relationships with multiple manufacturers, FIME Group, LLC seeks to provide all of the customer favorites among rifles, handguns, and shotguns.

    FIME Group, LLC.’s partnerships include:

  • Arex from Slovenia – the manufacturer of the Rex Zero 1 pistols, with a proven track record of over 20 years for manufacturing highly competitive products with premium quality and precision;
  • Molot from Russia – the manufacturer of the Vepr rifles and shotguns, one of the most rigid, toughest systems in the world;
  • Zastava Arms from Serbia – the manufacturer of the rifles based on the famous Mauser system.
  • FIME Group, LLC. is headquartered in Las Vegas, Nevada and may be found online at www.fimegroup.com

    Gunfighter Moment – Ken Hackathorn

    Saturday, February 25th, 2017

    Everyone from individuals to unit commanders want to establish ‘standards’ of skill. When we apply the ‘standards’ test to combat marksmanship, we generally like to use courses of fire or skill drills to measure performance levels.

    In my travels over the past few decades, when starting out with a new group, agency, or unit I often ask the leader or CO where the skill levels are with his people. The answer is almost always, “my guys are good”. Remember, good is a relative term. In some organizations, that can mean that they actually hit their targets occasionally, or that in some rare instances, they are really good solid shooters. A great many trainers of my era have developed skill drills to measure levels of proficiency. Many times, I have used those that were developed by others. The famous ‘El Presidente’ pistol drill is a great example. In most cases, after a couple of days of disciplined training and range practice, most students leave the class with enhanced levels of skill.

    In short, if I have done my job they have left the range better than they arrived. The real secret to reaching acceptable standards is practice. What a really good trainer does is give you the tools to utilize in practice. If you don’t practice, you will very likely never really be ‘good’. By the way, this applies to most things in life.

    If the standards are established to be challenging enough to produce true skill levels that are of benefit, our goals are fine. Sadly, what we see so often is very low standards that nearly everyone can pass. Law enforcement is a classic example of this, and most military combat marksmanship ‘standards’ are not far behind. Just look at the CCW skill requirements that one has to pass in most states (if they have them). So, we all understand that ‘standards’ must be established and realistic, then practiced until the individual can meet these requirements.

    I just recently had a gentleman inform me that he passed my ‘wizard drill’ with flying colors, and in his mind it was not challenging in the least bit. After a short conversation concerning his fantastic shooting skills, he admitted in the conversation that it took him a few tries to pass… WTF! I then informed him that the first try (shot COLD) is the only thing that counts; warm ups just don’t matter. You don’t get a chance to practice your draw, getting a slight picture, press checking your weapon, or any of the other stupid sh-t that people do on the range. If you can’t deliver on the first try, you better practice more.

    As important as standards are, and nearly all top shooters can quote the score or placement in a given shooting event where standards are measured, there is another factor that even the most lowly second lieutenant can quote is, after standards come the importance of ‘conditions’. This is an area that is widely ignored in the training world. Nobody likes to go to the range in terrible weather. I learned a long time ago that training classes in the Winter months just don’t go. Folks want a nice pleasant warm day with sunshine/dry conditions. Ask them to show up when it is cold, wet, or really muggy weather is a problem. Try to function with just a couple of hours of sleep over two days, and then see how well you perform on your ‘standards’.

    I live in a part of the world where Winter is not for the faint of heart, or those folks that like to go around all year in flip flops. When you are dressed for cold weather, wearing gloves, and it is close to zero, any combat marksmanship standard you have is going to suffer terribly. In most cases, skill levels will drop at least twenty five percent. If you normally are just fair in nice weather, you will really suck when the cold conditions take their toll. Most folks answer is to not practice or go to the range until Spring or Summer arrives. If you live in a part of the world where weather is a factor, or you must function in low light, the only ‘standards’ that really matter are the ones that reflect the ‘conditions’ you will really have to function in.

    If all you do is play games with guns, then brag all you want about how good your ‘standards’ are. If you must work or function in an environment that produces ‘conditions’ that you would not normally like for best results, maybe testing you standards in less than ideal ‘conditions’ from time to time is in order.

    Stay Safe; Stay Alert.

    – Ken Hackathorn

    Old Guy With A Blaster

    Ken Hackathorn has served as a US Army Special Forces Small Arms Instructor, Gunsite Instructor, and NRA Police Firearms Instructor. He is currently an FBI Certified Firearms Instructor, Certified Deputy Sheriff with Washington County SO, Ohio, and a SRT member and Special Response Team trainer. Ken has trained US Military Special Operations forces, Marine FAST and SOTG units and is a contract small arms trainer to FBI SWAT and HRT.

    Ken has provided training to Federal, State, and local law enforcement agencies and been active in small arms training for the past 25 years. He has written firearms related material for Guns & Ammo, Combat Handguns, Soldier Of Fortune, and currently American Handgunner and contributed to at least six other gun/shooting journals. Ken was also a founding member of IPSC and IDPA.

    Gunfighter Moment is a weekly feature brought to you by Bravo Company USA. Bravo Company is home of the Gunfighters, and each week they bring us a different trainer to offer some words of wisdom.