Pirata Series from OTB Boots - Coming March 2026!

Archive for the ‘Advertiser’ Category

SCUBAPRO Sunday – Fins

Sunday, July 7th, 2019

While the concept of fins is simple, the designs and options available are numerous. When evaluating which fins will best meet your needs, keep the following questions in mind:

• What do I plan on using the fins for PT/ Surface swimming, diving, Over the Beach (OTB)or river and stream crossing, will you be carrying them while patrolling?

• What water temperature range will you be using them in (so what size boot pocket will you need)

• What type of kick will you use, and in what environment, IE getting in and out of an SDV or closed in areas like around piers or caves?  

 

When the military first started diving, there was only basically one type of fin;(the duck fin) now there is a fin for almost every type of dive/swim. Fins are a specific piece of kit, almost to the point that you can have more than one set of fins depending on what you are going to do. Your fins are one of the only pieces of equipment that significantly affect how well you perform during your time in the water. 

Surface Fins

Typically, a more basic fin design will meet your needs. The length of the fin needed by surface swimmers is typically shorter than those needed by SCUBA divers and are they are shorter than those used by free divers. If you feel like you are fighting your fins rather than being aided by them, then your fins are probably more significant than you need. Meaning they are too big for you. Full foot fin are usually the best for this as long as the water is warm, or you can buy a set a little bigger and use a dive sock.  

Combat Swimming

Military divers tend to desire more fin features than recreational divers. They probably use a fin that has more in common with a technical / cave diver. There are two types of divers that are more aware of the propulsion power offered by their fins. SCUBA fins tend to be the same length or slightly longer than snorkeling and swimming fins, which means they require more leg strength and power to kick effectively.  

 

Foot Pocket Open or Closed

Water temperature will affect the gear you choose. The gear you wear can be a factor in determining the fins you take into the water with you. If you are in cold water, you will need thinker booties. The good thing about your feet is you can always go with a dive bootie in warmer water. Your feet, for the most part, will not overheat. So, you only have to worry about how cold the water is and if you have to use a thinker boot then usual. If you dive wearing boots (either neoprene or hard sole), an open-foot design fin is what you’ll want to wear. An open foot pocket accommodates boots because the heel strap was around the back of the diver’s boot and can be adjusted to offer a comfortable fit. If you wear rigid-sole boots, the open-foot pocket is the best option.  

Closed-foot fins cover your entire foot. You can still wear a dive sock to keep it from rubbing if you are going barefoot, but most people won’t need that.  

Propulsion

 Technology has help fin’s out over the last 20 years or so. If you are blindly wearing a pair of fins because it was issued and that’s all you have, you really should go to a dive shop and look at some more options. There are shoes today for running, doing CrossFit, or walking.  Fins have evolved to be the same way.

Diver fins now offer features like Paddle, Channel and Split fin designs.

 

 

Channel and Paddle

Channels help move the water across or through the fin, which allows the diver to move through the water quite rapidly. Channels increase the speed because they offer less surface area resistance in the water. The channels also offer extra flexibility, which means the fin can bend further and move more water with each kick. Modified paddle fins offer a more flexible material that is used for connecting the blade to foot pocket, cutaways in the upper portions of their blades, and soft center panels. They tend to be more flexible than traditional paddles, making them easier on the legs and ankles. The best paddles can compete head-to-head in comfort and performance with the best splits fins. It can also help on long dives with leg cramps and sore knees and angles. 

Split Fin

The theory behind split fins is as the diver kicks their foot downward when engaged in an up-tempo flutter kick, actually generate lift along with a jet-propulsion effect, similar to a boat’s propeller. The faster the propeller turns, the more propulsion is generated. With split fins, power comes from the speed of a diver’s kick rather than the force of the kick. Split fins are also popular among divers who experience knee pain or have had knee surgery. The split fin reduces the amount of resistance felt by the diver’s joints while offering a great deal of effectiveness with each kick.  

There are so many fins out there today that do some many things. It is tough to use one set of fins everything. I would also say there is no point to ask one set of fins to do anything. You can you a small set of fins for water jumps or river and stream crossing/ OBT and then when you are swimming on a long dive you can use a different pair of fins. Fins are like shoes, you have more than one pair of boots, and you can genuinely have at least two to three sets of fins that can do it all.

Lastly since is basically Independence Day weekend on July 6, 1747. John Paul Jones is born in Arbigland, Scotland. He is originally appointed to the Continental Navy in 1775, he is known for his quote,” I’ve not yet begun to fight!” during the battle between the Continental frigate, Bonhomme Richard, and HMS Serapis on Sept. 23, 1779.

 

 

OSS Suppressors Added to ADS Inc’s GSA Contract

Friday, July 5th, 2019

Millcreek, UT – June 25, 2019   OSS Suppressors LLC has been added to ADS Inc.’s Schedule 84 contract with the U.S. General Services Administration (GSA), the procurement arm of the federal government. The contract allows federal, state and local government entities to quickly and efficiently purchase OSS Suppressors and accessories.

“We are very pleased to have been added to ADS Inc.’s schedule with GSA. Our weapon suppressors and accessories are now available to all federal, state and local law enforcement agencies at pre-negotiated terms and conditions,” said Dennis Cunningham, OSS Director of Government Business Development and Sales. “We’re proud of the government and law enforcement contracts OSS has secured to date, and we will be able to secure even more of them via ADS Inc.’s GSA schedule.”

“OSS suppressors — with our patented Flow-Through™ technology — deliver superior sound suppression without affecting the performance of the weapon system, as can happen with traditional baffle suppressors. Law enforcement and military customers have praised the absence of toxic blowback, no weapons mods required, the enhanced shooting experience and the improved accuracy with our 556, 762, 338 and Magnum suppressors” said John Spurrier, CEO of OSS Suppressors.   

The GSA contract number is GS-07F-5965P, Mod PO-0763, dated 5/29/2019.

Marco Refill Kits Now Available from Blue Force Gear

Friday, July 5th, 2019

Blue Force Gear’s revolutionary Marking And Recognition Chemstick Organization dispenser – MARCO – just got better with the introduction of MARCO Refill Kits.

MARCO streamlines the pre-mission preparation of marking lights that are in use by top tier military and law enforcement units that Blue Force Gear is proud to support. Our new refill kits are being brought to market at the request of these end-users, who desire the ability to quickly top-off, or completely refill, dispensers when used in a training environment.

Each MARCO Refill Kit contains 30 individual 2-inch disposable marking sticks housed in a resealable bag and are available in red, blue, green or infrared hues. Miniature marking sticks provide the equivalent lumen output of 4-inch taped ChemLights, as seen through Night Vision Devices and are impervious to the elements; continuing to glow rain or shine, hot or cold.

About MARCO

MARCO is the simplest, most efficient means of carrying multiple marking lights, and reliably dispensing them, during complex room clearing operations. Using the MARCO dispenser and refillable packs in place of the traditional time-consuming method of prepping, taping and bundling chemlights, will save users critical time during pre- mission preparation.

While the MARCO was originally intended for use during urban tactical operations, it has proven to have crossover applications in the hunting, outdoor and off-road segments for marking trails, intersections or trailing downed game during reduced lighting conditions. It’s compactness, durability and ease of use is unrivaled in these applications.

For more information, technical specs or to view a video demonstration of Blue Force Gear’s MARCO Dispenser and other Blue Force Gear products, visit us at www.blueforcegear.com/marco-refill-packs.

Kits will ship Monday, when the crew gets back to work.

2019 S&S Precision Shop Show & Vendor Day

Friday, July 5th, 2019

Print
Don’t miss the S&S Precision Shop Show & Vendor Day, from 1300-1600, next Tuesday, July 9th at S&S Precision HQ. They’ve got some great partners in the lineup. Plus, catering by Mission BBQ.

FirstSpear Friday Focus – Warrior East

Friday, July 5th, 2019

Go check out the latest personal protective equipment from FirstSpear at the ADS Warrior Expo next week!

WTF’s ACRONYM Laminate Fabric is Now Available in 58″ Wide MultiCam Black

Wednesday, July 3rd, 2019

WTF are pleased to offer Multicam Black as our latest color in 58″ wide ACRONYM (Advanced Composite Rugged Optimized NYlon Material) 500D / 500D laminate fabric.

ACRONYM laminate fabric was developed specifically for laser cut applications.  Black, ranger green, and coyote brown are made with solution dyed, milspec fabrics.  Multicam is genuine Multicam pattern fabric.

Made in the USA from USA made materials.  Berry compliant.  Ships rolled.

www.wtfidea.com/whiskey-two-four-acronym-500d-laminate-58-137cm-wide-per-yard

Adaptable Belt Mount (ABM) Fits 30 Products HSGI Products

Wednesday, July 3rd, 2019

For Immediate Release – SWANSBORO, N.C. – High Speed Gear®, manufacturer of Battle-Proven Tactical Gear™, recently released a new mounting system, the Adaptable Belt Mount (ABM) for 30 of its most popular products.

 

The ABM attachment format offers a sturdy, belt width adjustable, anti-slide application for mounting HSGI® products to a belt. This attachment method uses a strip of durable, vinyl-backed 1000D Cordura® nylon laminate and reliable YKK® snap closure to create a belt loop. Two laser cut slits enable the user to thread the loop smaller or larger for 1.5” – 1.75” belts or 1.75” -2” belts, respectively. The inside of this fashioned belt loop features a patch of hook Velcro® designed to match up with the interior loop Velcro® of HSGI® rigger belts to lock the pouch in the desired position on your belt.

 

Additionally, ABM pouches feature a vertical channel behind the mounting panel. On some larger pouches, such as the ABM TACO® or Stun Gun TACO®, this channel is large enough to pass a belt through to mount the pouch sideways.

 

“Sliding a product onto your belt through a belt loop is a simple way to attach it. The Adaptable Belt Mount allows customers to put on their mag pouches, handcuff pouches, tourniquet pouches or other gear quick and easily,” explained Bill Babboni, High Speed Gear® vice president of sales and operations. “Keeping the process simple allows the customer to have the gear they need when they need it.”

 

The ABM is available 30 High Speed Gear® products, including TACO®s, medical pouches, radio pouches, handcuff pouches, general purpose pouches, stun gun pouches and shotgun shell pouches. Find the ABM at your favorite High Speed Gear® Dealer. To find a dealer near you, visit www.highspeedgear.com/dealers.

Grey Ghost Precision Independence Day Sale + New Handguards

Wednesday, July 3rd, 2019

Grey Ghost Precision Independence Day Sale

Grey Ghost Precision has a 25% Off Discount on GGP Glock Barrels, as well as newly released GGP AR-15 and AR-10 handguards in various lengths. These are the same MLOK handguards featured on their MKII line of production rifles, but are now available separately for the builder at heart. Browse Handguards here or Barrels here.

Grey Ghost Precision Handguards

If you had your eye on something else from Grey Ghost Precision, they are offering 20% Off and Free Shipping on everything else sitewide thru July 6th. No coupon code needed, just add items to cart to activate the discount.

www.greyghostprecision.com