TYR Tactical

Archive for the ‘Advertiser’ Category

SHOT Show 17 – Team Wendy CVC Adapter

Wednesday, January 25th, 2017

Team Wendy had begun working on a new Combat Vehicle Crewman Helmet for a foreign government when they realized that they could adapt the Bose or RACAL ear protection associated with the DH-132A helmet to their EXFIL ballistic helmet. One advantage to this development is that Vehicle Crewmen will enjoy the same level of protection as ground troops whether mounted or dismounted. This also means they won’t need two helmets.

The secret sauce is the adapter seen above which attaches to their rail and captures the earcups around their circumference. Additionally, the ear cups can be stowed to the rear of the helmet when dismounted from the vehicle to maximize hearing.

www.teamwendy.com

O P Tactical Offering Twin Needle’s Mini MAP

Wednesday, January 25th, 2017

The TwinNeedle Mini MAP is a modular assault pack that is sized to match the back of most plate carriers perfectly. The large main compartment features a sleeve to secure a 2 litre bladder (3 litre bladders will fit if they are not completely filled) and the external pouch can carry a 24 hour ORP (operational ration pack).

Two columns by three rows of PALS webbing on each side allow the user to fit more pouches to the sides. Three exit ports (one on the top and one on each side) allow the user to place their hydration hose to suit and compression straps allow the load to be cinched down and stop any “pouch bounce”. The webbing tabs on the base that cover the drain holes can be utilized to strap external loads to the bottom.

Dimensions: Main pack 37.5cm tall x 19.5cm wide x 8cm deep. Front pocket 20.5cm tall x 19.5cm wide x 6.5cm deep.

Occupies: 4 columns by 6 rows.

Approximate weight: 430gm (under 1lbs)

Available in Coyote Brown, Multicam, Black and Ranger Green

Made in New Zealand and can be purchased direct or via TwinNeedle’s US distributor O P Tactical.

SHOT Show 17 – SOTech’s “British” Load Carriage Vest

Wednesday, January 25th, 2017

Let’s face it, I’m jaded. I look at cool military gear everyday, so it’s hard to get me excited about much of anything. When I walked into the SOTech booth, it was more to wish Founder Jim Cragg congratulations for his company’s 20th anniversary than to check out more gear, as my fun meter had already pegged by day one of SHOT Show. Then, I looked on a lower shelf, and spied this beauty.

It’s a simple affair, mesh shoulders with no adjustment for length, connected directly to large, top loading GP pockets at the front and a big day pack at the rear. The vest also offers side adjustment and two front closure straps with QR buckles.

Unless you’re a true connoisseur of load carriage, you may not recognize this modern take on a classic British Load Carriage Vest, used by UKSF during the 70s in Oman, the 80s in the Falklands and Brunei and up until Operation Desert Storm in SW Asia. In fact, one was still being worn by a member of Executive Outcomes in the late 90s.

The Pack, Lightweight Combat was manufactured by several firms including Chelsea Quilt Company, commonly known as CQC, Ltd, and Mills Equipment Company (MECO). A common misconception is that this is the 72 trials pattern webbing because of its similar cut and materials, but while both were manufactured from Butyl rubber, they are distinctly different pieces of kit. The Lightweight Combat Pack was often used by UK special operators because the large ammo pouches to the front were adaptable to a wide variety of magazine types from Bren to Armalite magazines. The original model also often incorporated a specific pocket for SLR (FNFAL) magazines sewn to the front of either side’s large pocket to facilitate quick reloads. The lightweight design was intended specifically for use in tropical environments but often saw action in other regions, especially the desert.

SOTech created this no frills vest at the request of a customer for use on Close Target Recce where it can be removed from a pack and loaded with equipment needed for a short duration mission. It’s still a simple design, made from 500D Cordura and Mil-Spec mesh, with modern QR buckles. It won’t be for everybody, but some guys will get it, and use it.

www.sotechtactical.com

Quantico Tactical Is SureFire’s Top Military Dealer For 2016

Wednesday, January 25th, 2017

The title sums it up, not much more to say except “Congratulations” to Quantico Tactical. If you need SureFire products for your unit or agency contact them via www.quanticotactical.com.

SHOT Show 17 – SIG 1911 Max

Tuesday, January 24th, 2017

During SIG SAUER’s Media Range Day, I got a chance to check to out the 1911 Max, a signature version of the 1911A1 for Team SIG’s Captain, pro-shooter and Guinness World Record holder Max Michel, Jr.

Offered in .40 S&W as well as the more traditional .45 Auto, this full size 1911 features a stainless steel frame and Nitron finish slide. These are built in the SIG Custom Shop where they install a Koenig Speed Hammer, EGW sear ans firing pin and a Dawson diver optic front sight and adjustable rear. It also incorporates a flat trigger and competition magwell along with Hogue custom G-10 Chainlink grips featuring Max Michel’s logo.

Available now from SIG.

www.sigsauer.com/store/1911-max-full-size

SHOT Show 17 – Velocity Systems Overview

Tuesday, January 24th, 2017

In case you missed Velocity Systems at SHOT Show, here are five great new products. We’ll have more detailed articles on each one soon but I can tell you that if you already like the SCARAB LT, you’re going to love the SCARAB DLX.

The Placard Chest Rig Adapter is made with Helium Whisper and designed to turn their placards into a chest rig (attach placard to Chest Rig Adapter and clip into their H Harness using ITW Buckles).

The Tactical Back Panel was designed to be used in conjunction with any of their chest rigs. If the Plate Sleeve is used the kit can hold both front and back hard armor plates (Plate Sleeve and Chest Rigs sold separately). The panel includes an internal plate pocket and separate hydration bladder pocket.

The Mayflower Jungle Kit is designed to provide a load carriage solution for the hot, wet jungle environment. Features include an H-harness with removable padding, a sternum strap and pouch options. The pouches were designed around the amount and type of equipment usually needed for long duration jungle patrolling. All the pouches feature the Helium Whisper attachment system (zero water absorbency) and large diameter drain holes.

The 48 Hour Assault Pack Includes an integrated hydration bladder sleeve, small pocket for cell phone or PDA, PALS webbing on left exterior side, water bottle compression sleeve on right exterior side and an open top compression pocket on front.

The SCARAB™ DLX is Velocity Systems top of the line carrier in innovative technology and comfort. Weighing in at 1.6 lbs., the SCARAB ™ DLX is 20% lighter than the already ultra-light SCARAB ™ LT. The new design includes an interior frame built to put space between your body and the carrier for passive cooling and blunt trauma reduction. The revolutionary material used prevents the MOLLE capable triangles from long-term distortion or loss of shape. The ergonomically designed and adjustable padded shoulder straps articulate on a D-ring allowing them to sit correctly and comfortably on any user, regardless of neck width or shoulder broadness. The SCARAB™ DLX includes Integrated SwiftClip® buckles for rapid don/doff of auxiliary chest worn equipment (i.e. Chest Rigs and SwiftClip® Placards), and secure plate pockets that have Velcro® brand fasteners on the closure flap as well as on the interior plate strap.

All materials and workmanship are 100% made in the USA.

SHOT Show 17 – ADS Inc / Raptor Products

Tuesday, January 24th, 2017

ADS Inc exhibited the Raptor Products Weapon Weapon Mounting and Display System at SHOT Show. What I like about this system is that it offers so many different options for securing weapons of various sizes. Raptor has come up with multiple fixtures to secure weapons via different weapon components.

In fact, they offer so many different options, each one would require its own article. Take for example the Picatinny mount. As the name implies, it grabs the weapon by the Picatinny Rail. 

This video shows it in action.

Raptor has also developed an off-road Holster system for the GLOCK which will attach to an ATV’s rollbar.

Raptor Products are available for Unit and Agency orders from ADS Inc.

SHOT Show 17 – Blue Force Gear Klaux Plate Carrier

Monday, January 23rd, 2017

Blue Force Gear’s new Klaux Plate Carrier is the latest evolution in its PLATEminus Plate Carrier line. The KLAUX sets itself apart from other armor carrier systems currently available by using a patent-pending quick attach buckle. This distinct emergency-release system is built directly into the front attachment points of the vest. This allows the vest to immediately release and can easily be shed when the user pulls the release cable (conveniently hidden beneath the chin protector.)


The KLAUX Plate Carrier also greatly reduces reassembly time. Rather than spending up to 30 minutes for reassembly, most end users can reassemble the KLUAX Plate Carrier in as little as 30 seconds, which means that this carrier can easily be used in training where the user becomes familiar with the exact carrier they will be using in the field.

www.blueforcegear.com