XC3 Weaponlight

Archive for the ‘Armor’ Category

Crye Precision – Minimalist Plate Carrier

Tuesday, February 5th, 2019

Since the Minimalist Plate Carrier was in the Atlas room during SHOT Show, we didn’t think it was going to be released this year.

Our Minimal Plate Carrier’s™ (MPC™) is designed to reduce bulk and visual printing when worn under clothing. It is constructed of a composite Velcro®loop outer material to allow for versatile kit configurations and incorporates MOLLE compatible features as well. It includes a stretch cummerbund with integrated mag/radio sized pouches.  Made in the US from US materials.

Much to our surprise, Crye Precision announced it would be available in March.

www.cryeprecision.com

SHOT Show 19 – Vestshape

Tuesday, January 29th, 2019

Vestshape is a body armor vest hanger and carrier, making for easy hanging of duty vests without the wear and tear and stretching of shoulder straps and improper storage. Vestshape allows for convenient hanging of duty vests outside lockers for drying as well as carrying a strapped-in vest to and from the field.

Vestshape is based in Van Nuys, California and made in the USA.

Mission Spec Releases XL Version of the EC2 Plate Carrier

Tuesday, January 29th, 2019

Mission Spec has released the EC2-XL™, the larger version of the standard Essentials Carrier 2.  As the name implies this carrier is designed specifically for XL sized (e,x)SAPI (or like) armor plates (not included).

Just like the standard sized version, the EC2-XL includes native support for industry standard chest rigs (with the addition of 2 QASM buckles), dual tourniquet holders, dual pen/chem-light/medical gloves storage, cable and hydration routing options, rear pack hangers, and simulated PALS sewn into the semi-elastic side straps for extra MOLLE pouch support. Excluding armor, the EC2-XL weighs 29 ounces and is constructed from 1000D CORDURA (500D for MultiCam; Black, Arid, Tropic).

The video was produced for the standard sized EC2.

The EC2-XL is fully compatible with other Mission Spec products such as ShoulderSavers™ (all versions), FlankSavers™, and MagRack5™. Inserted armor is always kept at the highest possible position inside of the plate bags due to the EC2-XL’s armor suspension system.  All armor weight bypasses the CORDURA® layer and is loaded directly onto the internal webbing structure.

Available now in the entire line of standard colors and patterns offered by Mission Spec.  Custom colors and patterns along with other customizations are possible on a case by case basis. Contact Mission Spec if needed. 100% designed, tested, and manufactured in the United States with US sourced components and Berry Compliant.

missionspec.com/products/essentials-carrier-2-xl-ec2-xl

Visit Diamond Age at SHOT

Tuesday, January 22nd, 2019

View the latest advances in armor materials and systems at SHOT. One day only.

www.diamondage.org

S&S Precision Officially Launches its New PlateFrame Modular (PF-M)

Tuesday, January 22nd, 2019

The PlateFrame Modular™ (PF-M™) is taking the original PlateFrame™ to the next level. Engineered to optimize comfort, performance and modularity, the PF-M™ delivers a Dynamic Thoracic Load Bearing Distribution System. This Patent Pending system distributes the tactical load across/around the upper torso and not solely on the trapezius muscle. The benefits: zero load shift, consistent load management, reduced energy consumption, unrestricted locomotion mechanics and increased safety during climbing & dynamic movements.

Additionally, S&S Precision’s patent pending armor retention system allows users to configure the PF-M™ with armor plates of various sizes and thickness. Retention straps, in conjunction with flat camming locks, ensure a secure connection between the PF-M’s™ frames and ballistic plate.

To learn more, visit plateframemodular.com.

Safariland Introduces the PROTECH Hi-Viz Shield and DT206C Stand-Alone Type III Plate

Tuesday, January 22nd, 2019

Shield provides transparent view eliminating blind spotsCost-effective, lightweight plate stops threatening M855/SS1109 green tip rounds

Safariland Protech_Hi Viz Shield_Back (002)ONTARIO, California – The Safariland Group, a leading global provider of safety and survivability products designed for the public safety, military, professional and outdoor markets, today announced two new Safariland hard armor products – the PROTECH® Tactical Hi-Viz Shield – a clear type IIIA shield offering see-through visibility for the officer – and a 1.2” thin PROTECH DT206C stand-alone type III hard armor plate for stopping the most prevalent rifle rounds on the market.

“We’re continually working to offer innovative and essential products for law enforcement professionals, said Todd Mackler, vice president hard armor for Safariland. The Hi-Viz Shield offers life-saving ballistic coverage by providing maximum visibility, critical when approaching blind spots such as vehicle windows, doors and searching attics. The DT206C plate offers thinness in a price-competitive product and has the capacity to stop M855 Green Tip rounds, which many type III plates can’t stop.”

Safariland’s Hi-Viz Shield models are made of a polycarbonate composite for clear visibility and allow officers to see threats from a wide perspective vs. a small viewport. NIJ 0108.01 compliant, the Hi-Viz Shield provides ballistic coverage for the critical head, neck and upper chest area and stops 9mm and .44 Magnum LSWCGC rounds for five impacts. The design features a corner radius and is equipped with ambidextrous horizontal grips. When light is needed, it can accept an optional Foxfury® Taker R40 Riot Shield Light sold by Safariland.

The Hi-Viz Shield is offered in three sizes/cuts: 1224, 1224T (both 12” x 24” at a MSRP of $1,100 each) and 924 (9” x 24” at a MSRP of $950) and is available February. MSRP and availability for the Foxfury Taker R40 Riot Shield Light will also be February.

The DT206C plate is a high-performing, lightweight, type III stand-alone plate, effective even against the increasingly common M855 Green Tip (SS109) round. Competitively priced, the DT206C plate is made from a ceramic/PE composite, has a multi-curve design and is just 1.2” thin. A NIJ 0101.06 type III certified plate, the DT206C can defeat six rounds of the most prevalent ammunition on the market including the M80, MSC, M193 and the M855 Green Tip (SS1109). It comes in a variety of sizes which include:

– 8.75” x 11.75” SAPI Small (MSRP: $520)
– 9.5” x 12.5” SAPI Medium (MSRP: $530)
– 10.25” x 13.25” SAPI Large (MSRP: $580)
– 11” x 14” SAPI X-Large (MSRP: $690)
– 10” x 12” Shooters (MSRP: $530)
– 8” x 10” Rectangle (MSRP: $400)
– 6” x 6” Rectangle (MSRP: $270)

The Hi-Viz Shield and DT206C stand-alone plate will be on display at The Safariland Group booth, #12762, throughout SHOT Show 2019 from January 22-25. For more information, please visit www.safariland.com/safariland-body-armor.

Monadnock Debuts ExoTech Arm Protection Kit and Delta 4 Crowd Control Helmet Kit at SHOT Show

Monday, January 21st, 2019

Expands protective offerings for first responders involved in crowd management situations

Monadnock_ExoTech_Arm_Protection_Kit

ONTARIO, California – Monadnock®, a brand of The Safariland Group, a leading global provider of safety and survivability products designed for the public safety, military, professional and outdoor markets, today introduced the ExoTech® Arm Protection Kit and the Model D4CC Delta™ 4 Crowd Control Kit. The ExoTech Arm Protection Kit allows any PROTECH® vest or plate rack to be adapted to offer blunt force trauma protection for the arms. Compatible with all riot control suits, the Model D4CC includes the PROTECH Delta 4 mid-cut helmet with the Model DK6-H.150 Non-Ballistic Face Shield and the Non-Ballistic Nape Curtain (NBNC) in one package.

“With protests becoming more prevalent, first responders can now customize their gear to ensure dependable protection for different types of threats,” said Craig Starrett, category director for Monadnock. “That’s why Monadnock is taking crowd management protection to the next level with versatile offerings such as those that allow blunt force trauma protection to be integrated on tactical vests.”

The ExoTech Arm Protection Kit features upper arm, elbow and forearm coverage featuring a 3mm polyethylene shell, riveted polypropylene connector straps, and EVA foam and polyurethane sponge padding. The underside uses moisture-wicking fabric for comfort. Commercial-grade elastic adjustment straps with hook and loop fasteners attach to the shoulder straps of any Safariland® PROTECH tactical vest, offering the user blunt force trauma protection with their ballistic vest. It is reflective-label compatible, and comes in black in sizes small, medium/large and large/x-large. The MSRP is $98.90.

The PROTECH Delta 4 helmet is the basis for Monadnock’s D4CC Delta 4 Crowd Control Kit, featuring an NIJ 0106.01 tested Warrior/ACH brimless design protecting against type IIIA rounds and velocities. The mid-cut style helmet is made of aramid ballistic material and is equipped with the R2S™ adjustable suspension system. With an integral rubber seal as a liquid barrier at the helmet/shield interface, the kit includes an 8-inch long, .15-inch-thick non-ballistic face shield. The face shield easily locks into place for stowed or deployed positions with a transferrable hand release on the left or right side. The D4CC Kit also includes a Non-Ballistic Nape Curtain constructed of Cordura® nylon and high-density foam with chemical-resistant plastic shock absorbent pads. The kit comes in black, in sizes small/medium and large/x-large with an MSRP of $698.00.

The ExoTech Arm Protection and the D4CC Delta 4 Crowd Control Kit will be on display at The Safariland Group booth, #12762, throughout SHOT Show 2019 from January 22-25. For more
information, please visit www.defense-technology.com/monadnock/riot-gear.

SIG Range Day 19 – TYR Tactical

Sunday, January 20th, 2019

TYR unveiled their Level IV (in conjunction with) appliqué for their Ballistic Shield System which is inherently Level III.

Here you can see how it is attached via Ballistic Bolts.

Above, you can see the dolly for the shields, making this Modular System with a total weight of 126 lbs when equipped with two level IV shields, easy to maneuver.

www.tyrtactical.com