Atrius Development Group

Archive for the ‘International’ Category

Terävä Skrama 200 Now Available from Varusteleka Oy

Friday, April 17th, 2020

Varusteleka Oy gave us a sneak peek of their new Terävä Skrama 200 knife at SHOT Show.

Skrama – as in Scramasax or Seax, a short, single-edged sword popular in the Middle Ages. Much like the Scandinavian Leuku, it doubles up as a tool and weapon. A fine name is always nice and the best ones are those with some history behind them – our 21st-century Skrama would surely meet the demands of any Saxon man from “ye good olde days”.

The 200mm long 80CRV2 Carbon Steel blade is slightly curved, with a hole in the tip for hanging. The back of the blade is flat, no saw teeth so it can be used for batoning wood when an axe isn’t handy. The full tang construction reveals a hole at the butt for a wrist strap.

The blade is sharpened to two different angles. Near the grip a 2″ portion has an angle of 25° for whittling and fine work. The rest of the blade has an edge of 34°, which has proven to be excellent for this type of chopping blade.

The handle is rubber for a positive grip, even when wet.

Comes with a leather sheath. Available with a plastic cover for a slightly less, in case you want to fashion your own sheath.

www.varusteleka.com/en/product/terava-skrama-200-carbon-steel

TTS: New Modular Sniper Rifle System in Bullpup Design

Thursday, April 16th, 2020

Dietingen/Nagold (ww): Tec Target Schneider – TTS – and their sales partner I-E-A Mil-Optics GmbH recently presented a new modular sniper rifle system in bullpup design at the GPEC show.

Several barrel lengths and calibers (currently 6 x 47 Lapua, 6.5 Creedmoor, .308 Win, .300 Win Mag and .338 Lapua Magnum) as well as fore-ends of different lengths are available. The rifle can be operated from both sides and can be individually adapted to the shooter. It has a three-position safety (single shot, safe/lock chamber movable, safe/lock chamber locked), a match trigger, a rear monopod and is suspended on the adjustable bipod below the center of gravity. Stainless steel barrels and surfaces are mainly DLC-coated. The magazine capacity is five cartridges.

The modular design of the rifle allows the user to change barrels in different calibres and barrel lengths himself in a few minutes.

The advantage of the bullpup system is especially obvious in the precision shooting sector. The weapon retains compact dimensions despite its precision-suited barrel length. This allows the precision shooter to transport it more inconspicuously and to reach his position undercover. Furthermore, it is easier to shoot from cramped positions or vehicles.

TTS Managing Director Hubert Schneider learned his trade in the former Mauser factories in Oberndorf. In the Swabian cradle of German hand weapons technology, he was employed in the development department of Rheinmetall Waffe und Munition GmbH until his retirement.

Sales partner for the innovative TTS weapon systems is IEA Mil-Optics GmbH from Nagold. Orders can be placed now.

The TTS Xceed  is the result of many years of experience in the development and production of sports and precision rifles. A sniper system with a wide range of technical features, modular design and extensive adjustment options.

· Toolless adjustable ergonomics
· Longitudinally adjustable shoulder rest with height-adjustable recoil pad
· quick and fine adjustable monopod
· quick adjustable cheek piece
· Glove suitable trigger
· travel, force, pressure point and trigger force adjustable
· Change of barrel (various calibers) within minutes
· Locking directly in the liner via six lugs in two rows
· Three-position safety blocks the chamber and trigger
· Adaption possibilities through MLOK at the bottom of the barrel jacket
· Single row steel magazine for five cartridges
· Muzzle flash hider made of DLC-coated titanium
· Scope mount especially suitable for long range
· Fixed mounting of optics and NATO rail to carry a night vision intensifier in front of riflescope
· Height and length adjustable bipod suspends the rifle’s weight below the bipod mount, can be operated with one hand and silently
· High quality special coating of all weapon parts
· System housing made of high-strength aluminium
· Special coated barrel in stainless steel

Compact rifle all calibres Including .338: Length 875 mm barrel length 515 mm

Standard rifle: Length 1.030 mm, barrel length 670 mm

i-e-a.de/news/das-neue-tts-xceed

Qore Performance Optimizes Customer Experience for International Orders

Wednesday, April 15th, 2020

Sterling, VA – In their endless pursuit of improving customer experience, especially in these challenging times, Qore Performance is drawing on their close partnership with FedEx from winning the 2019 FedEx Small Business Grant Competition. Qore Performance is proud to announce that pre-paid customs fees are now available for shipping to Allies in the United Kingdom, France, Canada, Germany, and South Korea. Using the FedEx Delivery Duty Paid process, Qore Performance is able to calculate and pay applicable host government-imposed duties and taxes on customer orders before shipping. There is no markup fee for this convenience that expedites the order fulfillment and delivery process for a large portion of their international customers.

Taking advantage of this feature is simple. Based on the shipping address and order, the shipping cost and applicable duties and taxes are calculated automatically on the shipping page in checkout.  A flat rate is available as well, but this will not include any duties and taxes.

This program adds significant benefit to the customers’ experience by allowing delivery directly to their doorstep. It eliminates a trip to the post office or sorting facility and paying unknown secondary expenses from the host government-imposed duties and taxes. The program also allows Qore Performance to refund the customer in the event shipping expenses come in lower than originally quoted.

The Operations Team at Qore Performance reviews every single shipment to ensure the best customer experience possible and that the best shipping options are available. Using their expertise in international shipping, the team is able facilitate seamless delivery, even to the most remote locations on earth.

From CEO and Co-Founder, Justin Li, “In the midst of the challenges before us all, Qore Performance will continue to innovate to serve our customers with the highest quality products that defeat the effects of the environment on human performance.”

Qore Performance is shipping the same day on all orders placed before 2pm EDT (GMT -4hrs), including on Saturday.

www.qoreperformance.com

ZRODelta Announces Partnership with Victrix Armaments and ROME

Wednesday, April 15th, 2020

Rutherford College, NC – ZRODelta is excited and proud to announce that it has been selected by Victrix Armaments and ROME, members of Rottigni Officina Meccanica SRL, of Bergamo, Italy, to serve as exclusive distributor of Professional and Sporting products for all commercial applications in the United States.

Victrix Armaments is a prestigious Italian manufacturer of iconic bolt-action rifles, and manufactures elite weapon systems for many of the world’s most highly-decorated Special Operations Forces. After a brief period among the Beretta brands, Rottigni Officina Meccanica repurchased the brand Victrix Armaments, and is excited to begin its own journey in the United States with ZRODelta. And while Victrix rifles are perfectly suited for military and tactical applications, Victrix’s new Professional line of rifles is now available to American consumers. The Professional line consists of the all-new Pugio (caliber 308), Gladio (caliber family 308/260/6.5), Scorpio (caliber family 300 & 338), Tormento (caliber family 375 & 408), and Corvo (caliber 50). Victrix has also bolted onto the Sporting Competition market with the 2020 introduction of the Target & Target Blackbelt (F-TR), Absolute (F-Open), Performance and Challenge (NRL & PRS), and the Crown and Throne (King of 2 Miles). The ROME line of accessories includes optics mounts and rings, bipods, suppressors, chassis, and other must-have rifle accessories.

ZRODelta, primarily known for its OEM parts production service to the firearms industry, also manufactures its own line of Modulus® Modular Pistols, Ready Series™ line of MSRs, and Venator™ precision rifles—the only semi-automatic rifles in the world with a ½ MOA guarantee. It’s the intersection of artistry, attention to detail, and advanced manufacturing in these products that first caught the eye of Victrix founder and chief executive Giuseppe Valtorta. “When I picked up the ZRODelta Venator, it could have been a Victrix product. I knew at that point that the people behind ZRODelta were different, and would be able to deliver and support our products to those in the United States who value the same qualities we value.”

“Our partnership with Victrix will begin a new era for ZRODelta,” said ZRODelta President John Birk. “Just as we build the most accurate semi-automatic platforms in the world, Victrix builds the finest bolt action rifles in the world—period. Giuseppe and I pour our hearts into what we do every day and breathe life into our products for the benefit of our customers and end-users, and we are incredibly excited to bring the new Victrix brand to America for everyone to enjoy.”

The partnership brings streamlined pricing to the United States, designed to make consumer decisions clear when compared to the competition. Additionally, access to Victrix rifles and accessories aren’t the only thing that Americans are going to get to appreciate. In time, the partnership between the companies will develop into Victrix USA and yield the introduction of more exciting products and technologies, jointly developed and manufactured between the companies. Stay tuned for what’s to come.

Please visit www.VictrixArmaments-USA.com for product and ordering details, and dealer opportunities.

Varusteleka’s Remote Military March

Wednesday, April 15th, 2020

Due to the COVID-19 pandemic, all FTXs in Finland have been canceled. But as Varusteleka OY points out, they have 1600km of common border with Russia. Consequently, they see a need to keep their troops in top condition. 

Varusteleka has taken it upon themselves launch what they calling a “remote military march.”

Rather than unit-level training, they want individuals to participate and they don’t care if you aren’t in Finland. It’s about solidarity and fitness after all. They already have some of the US partners joining up as well as lots of other Europeans as well.

Participants will get an awesome patch. They also have the Corona-division, where you need to do either 25km or 50km march with your protective mask on.

Plain and simple, each individual warrior executes their march according to their guidelines and shares the fun on social media. This way everyone can keep in top rucking condition and bring some good vibes to these grim times.

All participants who complete the challenge and share it in social media will get the desired Varusteleka’s Remote Military March patch and they will also do raffle off 1 pcs of 100 € gift card and 2 pcs of 50 € gift cards.

Sat 25.4. – Sun 26.4.

• Military: BDU, military boots, at least 10 kg rucksack from start to finish

• Open: No requirements for clothing and shoes. At least 10 kg rucksack from start to finish

• Corona: Same as the military division but wearing gasmask throughout the route. Gas mask can be removed for drinking and maintenance. ATTENTION! Please be aware of your own performance level and health. If you are unsure or do not have experience of marching with the gas mask, do not take this challenge.

25 km or 50 km. Route according to own choice but the route should contain both paved roads and off-road sections. The route should avoid areas which might be heavily crowded

Alone or in small groups and keeping in mind required social distances. If possible, some sort of trailing or GPS tracking would be nice. Share your experiences on social media by using hashtags: #varusteleka #etäsotilasmarssi #remotemilitarymarch #ves #vrmm and mentioning us so they can find your efforts.

So fill your rucksack with rocks, replace the boot laces and go!

To learn more, visit www.varusteleka.com/en/event/varustelekas-remote-military-march-25-26-4-2020

Brigantes Issue Essentials – OMM’s Tactical Insulated Tarp

Wednesday, April 15th, 2020

Each week we bring you products that should be on all military standard issue kit lists. This week it’s OMM’s Tactical Insulated Tarp.

The OMM Tactical Insulated Tarp is a lightweight waterproof, multipurpose tactical warm/sleeping system. It has a camouflaged waterproof print on the exterior with a reversible inner white material for concealment in winter/snowy environments.

The Tactical Insulated Tarp can be configured in multiple ways to enable it to be used as a sleeping bag, an insulated tarp or worn as a full-length insulated waterproof outer layer.

As well as a sleeping bag and thermal, waterproof outer layer it can also be used as a waterproof insulated shelter. It comes with sewn-in tape and webbing rigs and each end that are internally strengthened. It can be tensioned and strung to provide a waterproof insulated shelter. Each corner has taped attachment points to allow for a customisable shelter.

For ease, the tarp packs down into its internal mesh pocket.

TECHNICAL SPECIFICATIONS

Waterproofing

• 0,000 mm Hydrostatic Head

• 10, 000 MVTR

• Fully Taped Seams

Insulation

• 60 gsm insulation

• TOG rating – 3

Dimensions

• Length – 200cm

• Width – 200cm

• Weight – 715grams

For more information contact internation@brigantes.com

For UK sales contact warrior@brigantes.com

Or visit Brigantes.com to set up an account.

DroneShield Ships Remainder of DroneGuns to Middle Eastern Customer

Wednesday, April 8th, 2020

DroneShield Ltd (ASX:DRO or DRO.AU) (“DroneShield” or the “Company”) is pleased to have released the following ASX announcement today.

The Company advises that, following a request by its governmental customer, it has shipped the remainder of the DroneGun Middle Eastern Ministry of Defence order.

Oleg Vornik, DroneShield’s CEO, commented, “Middle Eastern customer order flow processes are often less structured than those involving their Western counterparts, however DroneShield has a close relationship with this governmental customer and has received multiple payments from this governmental customer before, and therefore has a high degree of confidence in the process. DroneShield’s supply chain and manufacturing capabilities have remained intact through the current global crisis, and in fact have ramped up, following the opening of a new manufacturing facility in western Sydney earlier this quarter. We are continuing to see a strong level of engagement with our customers, as defence and security remain key priorities of Governments around the world.”

Aviation Specialties Unlimited Announces Millbrook Tactical as Exclusive Authorized Representative for Aeronox Product Line to the Canadian Department of National Defence, Federal and Provincial Agencies

Wednesday, April 8th, 2020

Aviation Specialties Unlimited, Inc. (ASU) and Millbrook Tactical Inc. are proud to announce Millbrook has been appointed the exclusive authorized representative for the ASU’s Aeronox product line to the Canadian Department of National Defence, Federal and Provincial Agencies.

“We’re absolutely delighted to bring ASU Aeronox to the Canadian market. Millbrook is dedicated to support Canadian security stakeholders with world class equipment and services”, said Allan Lewis, EO Program Manager. “ASU Aeronox is a pillar in the industry and we are extremely proud to represent them in Canada.”

For more information on ASU visit www.asu-nvg.com/aviation

Canadian customers can contact Allan at allan@millbrookcanada.ca