I like seeing simple solutions like this 6 shell Shotgun Shell Strip from Tactical Assault Gear.
Using vertical tabs, It wedges into place on a PALS field. Elastic keeps the shells handy, yet in place.
Available in Black, Coyote, Ranger Green and MultiCam.
www.tacticalassaultgearstore.com/horizontal-shotgun-shell-strip-6-round
This is Mayflower’s new Jungle Ultralight Chest Rig features Trilor Grid, which is stronger than standard laser cut PALS slots due to its shape.
It features a comfy, wide H harness which is removable as the rig is SwiftClip compatible.
The patented Stratus Tactical Plate is a weapon retention device for AR patten weapons. It replaces the standard lower receiver extension plate and integrates a low profile knuckle. It’s machined from billet T6 6061 aluminum and available anodized in Flat Black & OD Green. Cerakoted in Olive Green, Earth/Tan & No Finish Aluminum.
The STP’s knuckle slips into the MOLLE Adaptive Plate which integrates a PALS compatible attachment at the rear. The MAP is offered in Black, OD and Tan.
The STP also integrates a slot for a QD sling adapter.
For years, customers have been asking Dana Gleason to introduce a wheeled bag. They’ve listened and answered the call. At OR, Mystery Ranch exhibited their new Mission Wheelies.
Offered in three sizes (42, 81, and 130 liters), they feature a tub design made from a laminate of EVA foam exterior and polycarbonate interior in order to withstand the stresses of airline travel. The fabric is 1000D Cordura with 915D HP Cordura at the base.
The Mission Wheelie incorporates an expandable dirty laundry bag at the top and a footwear bag at the bottom. In the interior, you’ll find four zippered mesh pockets for organization. Finally, there are four handles (one each side) to make handling easier.
Just a heads up. As part of the MR commercial line, these are made in the Philippines.
Offered in Black and Coyote.
The Dip Can Holster is injection molded and integrates their Fast Clip System at the rear which is compatible with PALS or belt loops.
Available in Coyote or Black.
www.raptortactical.com/home/116-raptor-tactical-dip-can-holster
This is the new Direct Action Pack for the PICO DS armor vest. It zips unto the back panel of the PICO-DS, or can be worn with its integral, low-profile shoulder straps.
The DAP-DS offers an expandable main bag, an upper GP pocket and a lower, padded GP pocket.
It can be expanded via side zippers and will an AN/PRC-117 when expanded. It features a single hydration port and dual comms ports.
Raine is developing a Split-Front Chest Rig that integrates everything we have accomplished with the Bridger™ Cover from our Kickstarter. Link: https://www.kickstarter.com/projects/256206016/molle-cover-for-tubestm-cummerbunds-plate-carriers
We are currently looking for companies that would be interested in partnering with Raine to integrate our Patent Pending Bridger™ designs into their product lines, and have us sew their products at Raine’s factory.
Come see the Bridger™ Split-Front Chest Rig at Shot Show (Booth # 20132 and Booth #S1440).
Bridger™ Split-Front Chest Rig Features:
Multi-purpose split-front chest rig with H-Harness and seamless MOLLE Grid.
Adds back the MOLLE real-estate lost from using FirstSpear® Tubes™ (Bridges the Gap)
Covers and protects FirstSpear® Tubes™ hardware
Increases service life of Tubes™ hardware
Increased protection from accidental quick release opening of Tubes™ hardware
Built-in Tubes™ Buckles
Extended Quick Release Pull Cord for ease of donning and doffing with mounted dual stacked ammo, radio, and gear pouches
Weight: 1.1 lbs
LIFETIME WARRANTY
Made in the USA
Patent Pending
SHOT Show
Come see samples at SHOT Show, we have two booth locations.
Schedule:
• Shot Show Main Floor, Booth # 20132 (Tues – Fri)
• Shot Show Supplier Show Case, Booth # S1440 (Mon – Tues)
Email us at shotshow@raineinc.com to schedule a meeting (We are looking for Dealers and Distributors of the Bridger™ Cover).
The Bridger™ Cover that attaches to Firstspear® Tubes™ cummerbunds is available at our Kickstarter campaign page.
Help back the campaign and bring the product to market!
www.kickstarter.com/projects/256206016/molle-cover-for-tubestm-cummerbunds-plate-carriers
Shoot us a message on Kickstarter and let us know your with Soldier Systems and we’ll add a patch as an extra reward.
Disclaimer:
FirstSpear®, Tubes™, 6/12™ and 6/9™ are trademarks of FirstSpear, LLC. Products shown with these trademarks are built with FirstSpear Technology™.
Raine is developing a cummerbund that integrates everything we have accomplished with the Bridger™ Cover from our Kickstarter.
We are currently looking for companies that would be interested in partnering with Raine to integrate our Patent Pending Bridger™ designs into their product lines, and have us sew products at Raine’s factory.
Come see the Bridger™ Cummerbund at Shot Show (Booth # 20132 and Booth #S1440).
The Raine Bridger™ Cummerbund gives you back the MOLLE real-estate lost from using FirstSpear® Tubes™ quick release hardware on a plate carrier and body armor vest.
The Raine Bridger™ Cummerbund is compatible with all FirstSpear® platforms, does not interfere with the Tubes™ quick release function, and securely attaches to FirstSpear® Vests and Plate Carriers.
Bridger™ Cummerbund Features:
Adds back the MOLLE real-estate lost from using FirstSpear® Tubes™ (Bridges the Gap)
Increased body armor coverage
Covers and protects FirstSpear® Tubes™ hardware
Increases service life of Tubes™ hardware
Increased protection from accidental quick release opening of Tubes™ hardware
Built-in Female Tubes™ Buckle
Extended Quick Release Pull Cord for ease of donning and doffing with mounted dual stacked ammo and Radio pouches
LIFETIME WARRANTY
Made in the USA
Patent Pending
SHOT Show
Come see samples at SHOT Show, we have two booth locations.
Schedule:
Shot Show Main Floor, Booth # 20132 (Tues – Fri)
Shot Show Supplier Show Case, Booth # S1440 (Mon – Tues)
Email us at shotshow@raineinc.com to schedule a meeting.
The Bridger™ Cover that attaches to Firstspear® Tubes™ cummerbunds is available at our Kickstarter campaign page. Early Bird Bridger™ Covers are estimated to ship in April 2018.
www.kickstarter.com/projects/256206016/molle-cover-for-tubestm-cummerbunds-plate-carriers
Message Raine Inc. through Kickstarter and mention Soldier Systems and we will include a moral patch with your Bridger™ Cover.
Special thanks to Hank, the Soldier Systems community, and Eric for all your support in the product naming contest and backing the Kickstarter. Thank you everyone!
Disclaimer:
The Strandhögg plate carrier pictured in this post is made by Firstspear, LLC and the Bridger™ Cummerbund is made by Raine, Inc with Tubes™. FirstSpear®, Tubes™, 6/12™ and 6/9™ are trademarks of FirstSpear, LLC. Products shown with these trademarks are built with FirstSpear Technology™.
