SIG SAUER - Never Settle

Archive for the ‘Multicam’ Category

Mayflower Adds Armor to Line

Friday, June 19th, 2009

Mayflower Research and Consulting LLC in conjunction with Velocity Systems LLC has just released the first of their new Armor Line. The Low-Vis Assault Armor Carrier comes with Level III-A soft armor and was created by Mayflower to provide the wearer with a high degree of mobility while still providing an acceptable amount of armor coverage. The adjustable cummerbund has integral pockets for 6″ x 6″ hard armor side plates and is held in place in the front by a wide velcro flap that is wider than a hard plate. The flap also features pull tabs at the corners. The hard plates fit into pockets attached to the outside of the soft armor carrier. While the carrier is not a cutaway design, the shoulder flaps facilitate rapid donning and doffing yet remain secure during wear.

Mayflower Assault Armor Front

The Level IIIA Soft Armor panels are manufactured by Velocity Systems LLC and are certified to NIJ 2005 Interim Requirements for Bullet-Resistant Armor. They also meet or exceed the USASOC Fragmentation requirements and meet or exceed the DEA test protocol.

Manufactured from 500D Cordura the Low-Vis Assault Armor Carrier is Berry compliant and available in Coyote Brown, Multicam, and UCP.

The new Low-Vis Assault Armor Carrier is available for order now at www.mayflower-rc.com.

Tactical Research Kiowa in Multicam

Thursday, June 18th, 2009

Here is a sneak peak of the Multicam variant of the new Kiowa boot from Belleville’s Tactical Research.

Tactical Research Kiowa in Multicam

I have seen the Multicam Kiowa in person and in sunlight the suede actually color matches the Olive in the Multicam pattern.

Available in the near future from Tactical Research.

Congress Cares About Camo

Wednesday, June 17th, 2009

It seems someone clued Congress in on the fact that the Universal Camouflage Pattern issued to troops fighting in Afghanistan is far from the ideal. So Congress has told the Army to issue something better. Well, the first word in UCP is after all “Universal” and that makes it a compromise since it has to blend in everywhere. Oddly, Afghanistan is not monochrome and there are a variety of environments to blend in with so ultimately a “Universal” camouflage is what is called for after all. Maybe it just needs to be tuned a bit.

Here is the wording from the Conference Committee Report.
“The conferees understand that soldiers deployed to Afghanistan have serious concerns about the current combat uniform which they indicate provides ineffective camouflage given the environment in Afghanistan. Accordingly, the conferees direct that within funding made available the Department of Defense take immediate action to provide combat uniforms to personnel deployed to Afghanistan with a camouflage pattern that is suited to the environment of Afghanistan.

The conferees further direct the Secretary of the Army to provide a report on the program plans and budgetary adjustments necessary to provide appropriate uniforms to deployed and deploying troops to Afghanistan. The report shall be submitted to the congressional defense committees by the end of fiscal year 2009.”

So Congress wants the Army to reprogram money “immediately” to provide an alternative camo pattern for forces in Afghanistan and report to the Armed Services Committees before the end of the fiscal year on it will be accomplished. Can you imagine how this went over when word reached PEO-Soldier? “The jig is up, they’re on to us”.

Now please remember, that this still isn’t law. The President hasn’t signed it YET but is expected to soon.

So how will this play out? Interesting question, considering when asked just weeks ago at the Soldier Systems APBI about the possibility of alternative camouflage patterns, PEO-Soldier officials gave a curt, “No”. However, it has come to our attention that the 173d Airborne Brigade has been granted approval to wear Multicam during their OEF rotation. So that option seems open…maybe. Alternatively, it is highly unlikely that any new SOCOM patterns will be used by general purpose forces. 3-color desert pattern is still available but was replaced by the “superior” UCP so institutional momentum may veto its use. Desert MARPAT is a possibility, if the Army can wade through the interservice rivalry issues. And finally, what about an entirely new pattern, or old for that matter? Several promising designs were tested by Natick in the 2003-2004 time frame before UCP was adopted virtually out of nowhere.

Ultimately, it is going to be about cost. It isn’t just uniforms. There are a variety of other equipage and accouterments that must also be produced in an alternative pattern. And all of this while the Army is still in the throes of a complete roll out of the UCP pattern. Who will foot the bill? Congress has essentially issued budgetary guidance to the Army to reprogram funds.

Kifaru Now Offers Printed Webbing Option

Monday, June 15th, 2009

Kifaru International

American pack maker Kifaru recently discussed the issues that surround offering printed webbing on their web forum. Due to the cost involved with stocking additional materials in various sizes to manufacture packs with both printed Multicam and UCP webbing, combined with low market demand, they have decided to delay altering their line. However, they announced that they will now accommodate special orders, with a slight catch. You will have to provide the webbing.

Anyone interested in this option will need to contact Janice at the shop to get the correct Bill of Materials and be prepared to pay a 10% surcharge for a custom pack. This is the same procedure for other custom pack options they have offered in the past.

To order any of the Kifaru line of packs visit www.kifaru.net.

We would also like to take this opportunity to welcome Kifaru International as a new sponsor of Soldier Systems Daily.

Ghillie-style Boonie Hat

Thursday, June 11th, 2009

boonie

Last Fall we wrote an article about the new lightweight boonie hat from London Bridge. After fulfilling contracts the hats are now available through Tactical Distributors.

The Ghillie-style Boonie Hat features a ragged leaf/mesh crown with an Elasticized Soft Head Band for Comfort. This means you don’t need a chin strap. The One Size Fits all hat can be easily stowed in a cargo pocket and is ultra light weight, weighing in at a mere 1.05 Oz! Ample stocks of the hat are available and discounts are available for retailers. The part number is TNT-BOONIE-WD (woodland), –MC (multicam), -DD (Desert Digital), and -UC (UCP).

IMag Pouches Perfect for SASS

Friday, June 5th, 2009

The IMag Interlocking Mag Pouch System from Granite Gear we introduced you to at SHOT Show are apparently becoming quite popular with the Army Sniper community. In addition to 30 5.56 magazines, they also fit the magazine for the M110 Semi-Automatic Sniper System (SASS) offering a universal ammunition pouch for the Sniper. Snipers also like the pouch’s locking locking closure that won’t open during a stalk.

IMAg Interlocking Mag Pouch System

Granite Tactical Gear products are offered by MMI and this is, in conjunction with the new Sniper Ghillie Hut are just a taste of the products they have coming for the Sniper community.

Granite Gear Tactical products are made in the USA and available in Khaki, UCP, and Multicam from www.granitetacticalgear.com.

Ghillie Suit Base Layer

Sunday, May 31st, 2009

PEO-Soldier is finalizing an improved Ghillie Suit Accessory Kit which for the first time, has included a Base Layer garment. Designed by Crye, the Base Layer, according to a PEO-Soldier briefing, provides “fire resistance as well as improved counter-surveillance protection, protection from flame and thermal threats, increased mobility and agility, increased multi-system operability, and anti-odor/anti-microbial properties.”

Ghillie Base Layer

Of course this begs the question; is this an indictment of UCP? If snipers require superior camouflage why is it Multicam and not UCP?

ghillie base layer jacket

ghillie suit base layer trouser

Blue Force Gear Introduces DAP Discreet Case

Saturday, May 16th, 2009

Designed to fit SBRs (10.5″) carbines fully assembled or longer disassembled weapons, Blue Force Gear’s new Discreet Case has a removable padded divider to protect the broken down components as well as a small slot pocket for storing paperwork or small parts in addition to featuring a velcro patch for ID patches.

Blue Force Gear DAP Discreet Case

The whole point of the case is obviously discretion and their choice of colors reflects this. The usual, high demand color schemes of UCP, Black, Ranger Green, Coyote, Khaki, and Multicam are available as well as Burgundy, Royal Blue, and Emerald Green.

To complement the new case BFG is releasing an initial run of 15 different pouches and accessories for compartmentalizing inside the Discreet Case as well as the new DAP Pack (more on this soon). These pouches will also be a boon to those who use other products with velcro accessory panels.

The DAP Discreet Case made in the USA and available from Blue Force Gear or G & R Tactical.