Wilcox Ind

Archive for the ‘PALS’ Category

NEMO Gogo Shelters ADS

Friday, August 14th, 2009

NEMO has been producing lightweight, innovative shelters for several years now. Their hallmark is the AirSupported Technology which precludes the need for traditional poles. Developed by NEMO’s founder after his work on spacesuits and inflatable architecture with NASA, AST™ is a system of low-pressure inflatable tubes (called airbeams) and lightweight pumps that provide a high performance alternative to traditional tent poles. Airbeams are made of two layers, similar to a bicycle tire. An outer layer provides the shape, strength and puncture resistance, while a thin inner bladder holds the air. Feeling winded from a long day humping a ruck? No problem. Each shelter comes with an innovative pump that can be operated by hand or foot and will not over inflate the airbeam.

NEMO Airbeam

Over the last year or so they have begun to adapt their innovative designs for military use. In fact, the Gogo was provided for use during the REF’s lightweight equipment demonstration.

NEMO Gogo in OD

The Gogo is a single wall, one person shelter. It includes a pump and stores in a dry-bag style stuff sack. It has 19 sq ft of floor space with an additional 4.5 sq ft under the vestibule. It’s low profile design is perfect for tactical bivouacs being just 27″ high yet the 42″ width and 113″ length allow you to spread out. It is lightweight (1.9 lbs) and packs to a compact 7” X 5.5”. It features a quick set up (15 sec) and strikes even more quickly (5 sec).

NEMO's Gogo SE in Multicam

The NEMO Gogo SEâ„¢ (shown in Multicam) shares of all the same stats of the standard Gogo but features an extra six inches of length. It also boasts an additional side door for entry, exit, and ventilation.

NEMO tactical shelters come standard in OD, but can be special ordered in special colors like the Multicam shown with a minimum order requirement. All of NEMO‘s tactical shelters are available from ADS.

Tactical Tailor’s Hybrid Enhanced Vest

Thursday, July 30th, 2009

TT's HEVTT's HEVTT's HEV

The Tactical Tailor Hybrid Enhanced Vest (H.E.V.) is manufactured from 1000D Cordura with an air mesh lining. The design features modular webbing on all sides and is fully adjustable to fit most wearers. Safety features include a dual cummerbund system for proper vest posture and positioning on the body as well as a pull-over flap for quick removal in emergency situations. Internal pockets accommodate standard size plates and soft armor for most ballistic vests up to 17″ x 24″ front and 18″ x 22″ back. Also included with the H.E.V. are removal side closures with elastic for better fit and adjustment, padded shoulder straps with integrated microphone epaulets for added ease and comfort, and a heavy duty drag handle. The entire package has an empty weight of only 4.5 lbs. Soft armor packages are available exclusively to military and LE personnel with proper credentials. Available in Black, Coyote Brown, Ranger Green, and Multicam from www.tacticaltailor.com.

Chest Rig Armor Interface Kit

Wednesday, July 22nd, 2009

Ever wanted to attach your chest rig directly to your armor but wanted to to be able to get it off quickly?

Down Range Gear can help you do just that. Providing more of a service than a product, according the the owner of Down Range Gear, they work directly with the customer to develop a custom product. The goal is to identify the equipment used and deliver a set of buckles customized for the combination of vest and rig along with instructions on how to set it up but just as importantly, how to use it. Using the four to six points of attachment found on most chest rigs they anchor compatible buckles directly to the vest in order to support attachment of the chest rig.

Down Range Gear Chest Rig Armor Interface Kit

Customer participation is necessary to make the process work and pictures of the vest and the chest rig are almost always required to determine the best course of action. Further customer interaction and input is solicited through the build process in order to ensure a custom fit. With the myriad possible vest and chest rig combinations, there is no definite, single system and end user preference figures heavily in the final product.

Chest Rig Armor Interface Kit

Lastly, no matter what happens, Down Range Gear makes every effort to:
1. Not have the customer send any equipment in.
2. Not permanently alter either piece of equipment and ensure the chest rig can continue to be used with the harness as originally designed.
3. Ensure the anchor points and mating solution are easily understood, can be installed by the user and modified or repaired in field conditions.

Chest Rig Armor Interface Kit Components

Turnaround time is typically an astounding two to three days on a project. Only small design houses can provide service like this and it is imperative that we support them whenever possible. For more information on this service as well as the full line of Down Range Gear products, visit them on the web.

IOTV Modular Assault Panel (M.A.P.) from Tactical Tailor

Tuesday, June 30th, 2009

Tactical Tailor designed their new Modular Assault Panel (M.A.P.) to work specifically with the issue IOTV, allowing you to carry your normal combat load yet still remove it in seconds, without removing your vest and, more importantly, without impeding the quick release function.

IOTV Modular Assault Panel (M.A.P.) from Tactical Tailor

As with all Tactical Tailor products, the M.A.P is made in the USA from 1000D Cordura® and features four heavy-duty Fastex buckles, velcro and their patented MALICE Clips to attach to the front panel of the IOTV.. It is available in UCP and Coyote Brown from Tactical Tailor.

Mayflower Review

Thursday, June 25th, 2009

One of our readers sent us this link of a review of Mayflower’s UW Chest Rig. It weighed in at an astounding 15.8 ounces! The article has many excellent photos of the vest’s various features and also contains feedback from Mayflower on issue that were brought up in the review. It is available here.

Joey Hydration System from Tactical Tailor

Wednesday, June 17th, 2009

Tactical Tailor has produced the new Joey Pouch to accommodate Source Hydration’ Kangaroo Bladder. It is the perfect replacement for the traditional canteen, but it is even better. It has a drinking tube like other hydration bladders but is much more compact.

Constructed from 1000D Cordura, the Joey features a dual-pull zipper and external PALS webbing. It attaches to PALS equipped platforms with two long MALICE CLIPS®. Additionally, it will accommodate a standard Nalgene bottle.

Tactical Tailor Joey-Open

The Joey is Made in the USA and available in UCP, Tan, and Black with or without bladder. However, the Black pouch is not available with bladder. Order from Tactical Tailor.

Plat A Tac Modular GRAB Bag

Tuesday, June 9th, 2009

Plat A Tac Modular GRAB Bag

Part of the PLMRS (Platypus Light Modular Recovery System) pronounced ‘Plumbers’, the GRAB bag features a PALS-compatible attachment system.

The bag has a dual flap lid with sub-lid for comms systems, internal and external PALS, a waist belt, and shoulder strap. The shoulder strap has a radio microphone attachment point.

Available in Olive and Tan and made in Australia. For more info visit Plat A Tac.

IMag Pouches Perfect for SASS

Friday, June 5th, 2009

The IMag Interlocking Mag Pouch System from Granite Gear we introduced you to at SHOT Show are apparently becoming quite popular with the Army Sniper community. In addition to 30 5.56 magazines, they also fit the magazine for the M110 Semi-Automatic Sniper System (SASS) offering a universal ammunition pouch for the Sniper. Snipers also like the pouch’s locking locking closure that won’t open during a stalk.

IMAg Interlocking Mag Pouch System

Granite Tactical Gear products are offered by MMI and this is, in conjunction with the new Sniper Ghillie Hut are just a taste of the products they have coming for the Sniper community.

Granite Gear Tactical products are made in the USA and available in Khaki, UCP, and Multicam from www.granitetacticalgear.com.