Press Release | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Press Release’ Category

Victory First introducing the V43 Upper Receiver at SHOT Show 2019

Friday, January 11th, 2019

For Immediate Release

Fredericksburg, Virginia 01.10.2019

Victory First is excited to announce the debut of their V43 Upper Receiver at the 2019 NSSF SHOT Show, January 22 – 25, 2019 in Las Vegas.

The V43 is a custom-designed and manufactured slide for a stock Glock model 43. The concept that began in 2017 in nearing the final stages of testing and Victory First is shooting for full rate production and shipping to begin in 1st quarter of 2019.

Matt Jacques, founder and owner of Victory First, explains:

“The intent of the project was to simply lengthen the slide and barrel to increase the comfort for concealment, specifically when carrying the gun in the appendix region (AIWB). I spend a ton of time with folks discussing why short sight radius guns are so uncomfortable when carrying AIWB. I refer to it as the Lego Principle. Stepping on a Lego wouldn’t hurt if it was the size of your cell phone; short guns hurt because they pinch at your waist. So, we’ve stretched the slide and produced a match barrel to optimize the Glock Model 43.”

The V43 is a custom, direct drop on slide that is precision machined from 17-4PH Stainless steel that is fitted with OEM Glock components and, as Jacques stated, a match Victory Barrel. The slide is 6.89in. in length and the standard barrel will measure 4.33in. Threaded barrels in industry standard thread pitch will also be available at full rate production.

Jacques continues.

“This configuration keeps the frame slim, but gives it a G19-ish sized slide and barrel combo. This will alleviate discomfort felt by folks who love the slim profile of the Model 43 but found it unpleasant to carry. There is the additional benefit of lengthened sight radius and increased barrel length, both of which improve accuracy and performance. We have prototype samples of slides for direct mounting various red dot optics, so yes, we’ll be offering those as well.”

Make plans to see the new Victory First V43 at SHOT Show in booth #20066

For additional information, contact our staff: info(at)Victory-First.

Train Smart, Train Often, Victory First

Visit Victory First online at www.victory-first.com

Connect on Facebook, /Victory1st/. www.facebook.com/Victory1st

Follow on Instagram, @victory1st. www.instagram.com/victory1st

Follow on Twitter, @VictoryFirst. twitter.com/VictoryFirst

Posted in Press Release, Weapon Accessories | 9 Comments »

N-Vision Optics Introduces HALO Thermal Scopes and ATLAS Thermal Binocular w/25mm lens

Thursday, January 10th, 2019

We are pleased to announce the latest additions to our thermal product line: HALO Thermal Scopes and ATLAS Thermal Binocular w/25mm lens.

The N-Vision Optics HALO Thermal Scopes come equipped with state of the art 12 micron 640 x 480 thermal sensors offering outstanding image clarity and extended detection ranges. HALO Thermal Scopes feature long lasting battery life, waterproof housings, 60Hz refresh rate, digital zoom, and most impressively, unique Region of Interest (ROI) Optimization that enhances image clarity at your point of aim.

N-Vision Optics is offering two models of HALO Thermal Scopes: HALO and HALO-LR

HALO Thermal Scope is a lightweight, compact, wide field of view thermal scope designed for short to medium range shooting.

HALO-LR Thermal Scope takes everything featured in the HALO to the next level for medium to long range shooting. Equipped with all the same features as HALO, HALO-LR is built with a 50mm F1.2 objective lens offering thermal detection ranges (man sized target) of over a mile.

In addition to the introduction of the HALO Thermal Scopes, and due to overwhelming customer demand, N-Vision Optics is also expanding their ATLAS Thermal Binocular line. ATLAS is now available in both 50mm and 25mm configurations.

ATLAS 25mm builds on the popular ATLAS 50mm Thermal Binocular as a powerful tool for handheld thermal detection and scanning. ATLAS 25mm Thermal Binocular is equipped with the same features as ATLAS 50mm, but is built with a 25mm F1.1 germanium objective lens providing a wide 18°x14° field of view allowing for increased situational awareness and scanning capabilities.

For more information be sure to visit N-Vision Optics at SHOT Show booth 20034.

www.nvisionoptics.com

Posted in Optics, Press Release | Comments Off on N-Vision Optics Introduces HALO Thermal Scopes and ATLAS Thermal Binocular w/25mm lens

Alliance Week 2019 Announces Sponsors

Thursday, January 10th, 2019

LAS VEGAS, NV – 20-25 JAN 2019

Post Falls, ID. (Jan 3, 2019) – www.anterisalliance.com Anteris Alliance, LLC was founded in early 2017, after a small group of companies decided to work together to do more than they could accomplish by themselves from product demonstrations, customer events, and ultimately Veterans and First Responder support. Already, with over 60 corporate partners and counting, the mission has taken hold at every level. Whether as a manufacturer or service provider, a buyer, media, influencer, patriot or nonprofit partner there is a way for everyone to be part of this great movement!

The Alliance will host their annual Alliance Week series of events for 20-25 Jan, 2019, with events to include Try & Buy, Patriot Pitch Tank, Showcase, FLEOA Silent Auction, Alliance and SOCN After Party Concert, and Hospitality Networking Suite! https://www.anterisalliance.com/alliance-week

This year’s Platinum Sponsor is AMMO INC, the parent company of amazing ammunition brands to include Jesse James ammunition, Streak Ammo, Stelth Ammo and Black Ops ammo. https://www.ammoinc.com

For those looking to exhibit or sponsor to feature their great brands, this is the best bang for the buck especially for young companies looking to make a splash in this great industry! Incredible sponsorships also available while supplies last! Contact us today to reserve your spot.

Event questions can be directed to info@anterisalliance.com.

Interested Manufacturers, Dealers, and Individuals can visit www.anterisalliance.com for more details and follow Anteris Alliance on social media on all major platforms – Facebook, Instagram, Twitter!

Posted in Industry, Press Release | Comments Off on Alliance Week 2019 Announces Sponsors

Comp-Tac Releases Holster Fits for New Glock 48

Thursday, January 10th, 2019

1/8/19 – Houston, TX – Comp-Tac® a leader in high quality holsters for competition, concealed carry, and duty use, has expanded many of their holsters to fit the new Glock 48 including: The MTAC™, The eV2™ and The Warrior™.

The MTAC™ Holster is hybrid holster with two layer leather backing and Kydex shell making this a comfortable concealed carry choice. The MTAC™ is tuckable allowing the user to tuck their shirt in over the gun. With interchangeable shells, customers who already own and MTAC™ holster can upgrade just the shell for their new Glock 48.

The eV2™ is an appendix inside the waistband (AIWB) holster that is designed for casual EDC as well as deep concealment applications. The Glock 48’s slim design will work well with the eV2™’s kick which will hide the grip by pushing it into the body.

The Warrior™ holster is a slim pancake style outside the waistband (OWB) holster. Designed to fit close to the body for easy hiding, the Warrior is also very accessible for a quick draw. The Warrior™ holster is also optics ready and open ended for threaded barrel use.

“The beginning of the year is always an exciting time for gun owners as all the new guns are being released. We were very excited to obtain one of the new Glock 48s so early and get our holster options up and running. It is great to get a new gun, even better to get a gun and a holster to use right away.” said Gordon Carrell, General Manager of Comp-Tac®

For more information please visit comp-tac.com

Posted in Advertiser, Holsters, Press Release | Comments Off on Comp-Tac Releases Holster Fits for New Glock 48

Angel Armor Launches RISE 2.0 and Truth SNAP 855 Plate System for Increased Special Threats (M855) for All-Day Rifle Protection

Thursday, January 10th, 2019

FORT COLLINS, CO., — January 9, 2019 — Angel Armor has redefined armor once again with the launch of RISE 2.0 and the Truth SNAP 855 Plate System, which exhibits increased levels of protection against special threats (M855 Green Tip) in an innovative, lightweight, modular package.

“Unlike other plates on the market,” said Josh Richardson, co-founder of Angel Armor. “The Truth SNAP 855 Plate System allows for the user to replace just the ceramic strike face, which is the least expensive component of any ceramic-based solution, if ever damaged, increasing the overall life of the product while reducing budget strain. This is just one of many benefits that the Truth SNAP 855 Plate System offers to the user.”

Angel Armor has redesigned the RISE Armor System in RISE 2.0 to offer enhanced comfort, ballistic coverage, and versatility while improving All-Day Rifle Protection and market-leading weight distribution. The RISE 2.0 armor carrier utilizes 90% new premium materials with proprietary manufacturing methods and exhibits front and rear, top-load rifle plate access. The soft armor profile has been optimized using researched-based design through a collaboration with a leading University and local law enforcement.

RISE 2.0 is available in a variety of colors and offers custom sizing.

The Truth SNAP 855 Plate System and RISE 2.0 will be officially unveiled at Shot Show in Las Vegas on January 22nd. Please visit Angel Armor at Shot Show Booth #7511 to try on the RISE 2.0 Carrier and Truth SNAP 855 Plate System.

About Angel Armor

Angel Armor, an innovative company based in Fort Collins, Colo., exists to protect and preserve the pursuit of life, liberty and happiness for law enforcement officers and their families. For more information visit angelarmor.com or email: sales@angelarmor.com.

SPECS | Truth SNAP 855

The Core Plate of the Truth SNAP 855 Plate System is a NIJ Level III ICW plate weighing in at just 1.45 pounds in an 8×10 shooter cut and just .55 inches thick. This innovative solution allows the user to magnetically attach a ceramic strike face to the core plate for increased special threats, for a total system weighing less than three pounds. The system is also available in 10×12, 8×10, 7×9 with an added new size of 9×11 for maximum All-Day Rifle Protection in our RISE 2.0 Carrier.

RISE 2.0 is available in a variety of colors and offers custom sizing.

angelarmor.com

www.facebook.com/AngelArmorIntel

Posted in Armor, Press Release, SHOT Show | 3 Comments »

Thunder Beast Arms Corp Announces 338 Ultra SR

Wednesday, January 9th, 2019

We are pleased to announce the new 338 ULTRA SR suppressor. This is the first suppressor to feature our “SR” mount. The SR mount is our “QD” style mount that maintains the absolute accuracy and repeatability standards we are known for while offering more rapid mounting and removal and featuring a Secondary Retention (“SR”) or “Locking” collar. This mount meets the mil spec represented in the 2017 Advanced Sniper Rifle (ASR) solicitication, and the 338 ULTRA SR is the suppressor that Accuracy International North America chose for their ASR rifle system submission.

The main feature of the SR mount is that it acts as a secondary, fail-safe, locking mechanism to retain the suppressor on the muzzle brake in all circumstances, unless explicitly removed on purpose, by hand. It also reduces the number of turns required to mount the suppressor due to a coarser thread and enables “Quick Mount” and “Quick Detach” functionality of the mount. The mount is mechanically very simply and user-level maintenance is possible.

HOW OUR MOUNT IS DIFFERENT

The SR mount uses a novel paw and cam-path system to ensure that “full lock up” can happen in either of the two adjacent detent slots for any given final shouldering position of the suppressor on the conical brake shoulder. This categorically avoids the “off by one” problem that many “clicky” mounts have. The SR mount has the exact same accuracy, repeatability, and return-to-zero characteristics that all our precision suppressors are known for.

This mounting system is covered by US Patent 9,791,234.

For more details, please visit the 338 ULTRA SR Product Page.

The 338 ULTRA SR will be offered for sale starting the first morning of the 2019 SHOT Show (Jan 22nd). We will not accept orders, pre-orders, or backorders until then. We have a considerable stock of these available but after that initial stock is depleted, additional orders will be subject to our normal production backlog.

Posted in Press Release, Suppressors | 3 Comments »

Badger Ordnance Introduces the Condition One Modular Mount

Wednesday, January 9th, 2019

Badger Ordnance is proud to announce their new Condition One Modular Mount (C.O.M.M.).

The C1 Modular Mount is Badger Ordnance’s answer to a growing demand for modularity in optical platform mounting. The C1 Modular Mount offers the end user four accessory mounting points on the Unimount body both left, right, fore, and aft to suit a wide range of shooter’s needs. With the ever-expanding options available to shooters in the accessory and electro-optic markets, Badger Ordnance saw the need for a mount that can make the most use of precious real estate on rifle platforms while acting as a centralized hub for attachments and not suffering from deflection seen on optics and lasers attached to handguards.

For 2019 Badger Ordnance has also introduced new mount heights to their lineup. The C1 Modular Mount is available in a 1.93” tall height for shooters who prefer a more heads up shooting position or to allow for clearance of lasers and attachments. The 1.93” tall mount also helps to aid in shooting passively through optics while wearing head borne night vision systems. Badger has also introduced the height of 1.70” which is the common height of lower 1/3rdred dot mounts. With the wide adoption of low power variable optics Badger Ordnance felt the need for a mount height option for shooters who have developed their skills on, and spent tireless hours training with, lower 1/3rdheight red dots. The C1 Modular Mount is also available in NV height compatible options both in flat and 20MOA bias with options available for mounting co-aligned laser range finding systems.

Commercial release for the C1 Modular Mount is set for Q1 2019 with initial offerings in 30mm, 34mm, and 35mm with initial Micro Sight Mounts being offered for the Leupold DPP, Trijicon RMR, and Aimpoint T1/T2. Badger Ordnance will continue to develop the C1 Modular Mount line with attachments such as levels, mounts for digital displays, angle cosign indicators, offset sighting systems and much more. Whether you’re a casual shooter, competitor or those serving their Nation in Law Enforcement or Armed Services, the Badger Ordnance C1 Modular Mount will meet your demands.

Be sure to see Badger Ordnance at SHOT Show at booth #20005.

Go Condition One!

www.badgerordnance.com

Posted in Optics, Press Release, SHOT Show | 10 Comments »

Ed Brown Products Renews Collaboration with ZEV Technologies for 2019

Wednesday, January 9th, 2019

PERRY, MO – Ed Brown Products, Inc. is excited to renew their collaboration with ZEV Technologies, Inc. for 2019. The perfect marriage of ZEV’s unique styling with Ed Brown’s classic quality 1911, this new collaboration builds on the success of the prior year EB/ZEV pistol, and takes it to a new level. Incredibly sophisticated slide cuts show off both ZEV’s innovative designs, and Ed Brown’s state-of-the-art custom machining ability.

This Commander Lightrail 9mm model is fully machined and adorned with the ZEV Orion slide cuts package. Dressed in all black, the front strap and blended magwell housing features Brown’s new Alien metal treatment, perfectly matched with Alien grips. A suppressor ready barrel with ZEV dimples, scallops on the lightrail, recessed slide stop with serrated pin, and Trijicon RMR® with co-witnessing tritium sights, finish out this show-stopping masterpiece of functional artistic craftsmanship.

John May, Sales and Marketing Director for Ed Brown Products said, “We are excited to be working with ZEV Technologies on this new collaboration. This pistol takes the strengths of two power houses in the custom handgun business and joins together our talents, providing our customers with the best new products every year!”

For more information on EB/ZEV 1911 or any of our custom 1911s please check with your local Ed Brown Products Dealer or visit www.edbrown.com. Follow Ed Brown Products on Facebook and Instagram, and find informational videos on their firearms by visiting their YouTube channel.

Posted in Advertiser, Firearms, Press Release | Comments Off on Ed Brown Products Renews Collaboration with ZEV Technologies for 2019