The Select Adjustable Gas Block allows a near infinite initial adjustment using an allen wrench. To begin, simply turn the gas screw in (reducing gas) or out (increasing gas), whichever you require, and finish by attaching the gas switch for tool-less, on the fly adjustments without losing your initial gas setting.
• 40 position fine adjustment
• Tool-less gas selection switch
• Suppressed or un-suppressed
• Melonite coated tool steel
• Avilable in .750 and .875 DIA
MSRP: $119
Samson Manufacturing, a leader in AR-15 handguards and accessories, recently expanded their product line to include accessories for the M&P Shield.
Samson’s latest offering is the Pocket Comp. Designed to fit ½ X 28 threaded barrels and use the factory recoil spring, the revolutionary two-part system uses a proprietary barrel nut as an attachment point. The Pocket Comp then slides over the barrel nut and is attached using hex head screws. This system allows for a rock-solid interface with no chance of marring the barrel threads. When not using the Comp, the barrel nut can remain on the barrel acting as a thread protector.
“Not only is the Comp small enough for pocket carry, the attachment system is unlike anything currently in use on a handgun” said Samson spokesperson Dave Biggers. Contoured to match the slide and with minimal gap between the slide and comp, it looks like an extension of the barrel rather than an add on. The Pocket Comp is machined from aircraft-grade 7075 aluminum and mil-std hard coat anodized for durability.
For more information you can visit their website www.Samson-mfg.com?.
STERLING, VA (January 20, 2018) – Silynx Communications, Inc. and T-Worx Holdings, LLC have partnered to combine their wireless push-to-talk technology and Intelligent Rail® (also known as the Powered Rail®) technologies, respectively, to facilitate a new level of hands free communications for the military warfighter and the tactical law enforcement officer.
The core Intelligent Rail® (I-Rail®) technology by T-Worx is a sealed, ruggedized Mil-Std-1913 Picatinny Rail that provides a central power source and data connection for all weapon-mounted accessories. With this partnership, the two companies are integrating command and control from the I-Rail® via a rail-mounted control module containing three user-assignable control buttons.
Within the control module is Silynx’s proprietary wireless push-to talk (PTT) technology that seamlessly offers radio keying capability from the rail to the operator-mounted Clarus PTT unit that consolidates transmission of multiple radios without removing hands from the rifle.
Matthew Hemenez, President of Silynx Communications says, “This partnership is indicative of the commitment of both companies to enhance the command and control capability of the warfighter.” He adds, “We have done this without increasing complexity or imparting more battery requirements onto the operator.”
In all, this system allows soldiers a significant tactical advantage by enabling radio communications without removing their hands from their weapons. When not “on-the-gun,” the soldier can still activate his radio from the ambidextrous push-to-talk buttons on the body-worn control box. The I-Rail® provides electrical power directly to the control module and all weapon-mounted accessories, while also providing the “network” on the weapon for passing data and communication between accessories and off the weapon to an EUD or hub.
“This technology partnership brings together two industry leaders to develop a new generation of weapon sensor controls, each previously independent of one another,” says Don McLaughlin, President of T-Worx, “Already proven in Army trials, we expect broad scale adoption in 2018.”
The I-Rail and Clarus systems are both on display at SILYNX BOOTH #7310.
CMC’s Match Precision Barrels are the ultimate upgrade drop in barrels for Gen 3 & 4 Glock® 17,19 and 34 Pistols. Our Match Grade barrels are precision machined from Certified, DFARS compliant; pre hardened 416R premium grade stainless steel, to extremely tight tolerances and exacting details.
416R stainless steel is recognized for its corrosion resistance, machinability and high tensile strength; it is the industry standard for premium Match Grade barrel manufacturing.
CMC’s propriety In house machining, production and Quality control inspection process’s allow us to attain an ultra-precise barrel with enhanced slide fit & lock up for improved accuracy.
Our barrels are 6 groove, cut rifled, 1:10 Twist Right Hand, fully QC inspected, double honed (rough and finish) to produce the smoothest bore possible, with a Max Roughness Average (RA) of 12. Finished bore dimensions are held to +/- 0.0005″ tolerance from nominal groove and bore dimensions but the dimensions are uniform to within 0.0002 for maximum consistency, accuracy and quality.
SAAMI, Match Grade specification chambers, precision cut and finished to a maximum Roughness Average (RA) of 16.
The pre hardened 416R stainless steel is stress relieved to an exacting recipe after rifling and final hardness is 38-42 Rockwell C before final barrel profile machining is completed.
Barrels are bead blasted to create a satin finish prior to plating and are available in 3 finish options.
§ Stainless , uniform Satin Blast Finish with ultra- low friction hBN (Hexagonal Boron Nitride) Bore & Chamber
§ Bronze TiCN, with ultra low friction hBN (Hexagonal Boron Nitride) Bore & Chamber
§ Black DLC, with ultra low friction hBN (Hexagonal Boron Nitride) Bore & Chamber
User friendly, our barrels are drop in; they do not require gunsmith assembly.
These are an affordable, ultra accurate, durable upgrade to your existing Glock® 17,19 or 34 factory barrel.
Barrels are available with and without suppressor threads in 1/2-28 TPI RH
Our Barrels are straight fluted for aesthetic purposes
100% Manufactured in house, in The Great State of Texas
Glock17, 19 Threaded Fluted MSRP $210.00
Glock 17, 19 & 34 Non Threaded Fluted MSRP $199.00
Delivery In stores February 2018
KDG continues to build their proven lineup of Sidelok mounts, with two new offerings for the popular Trijicon RMR, and other similar miniature red dot sights using the same footprint for mounting. The new mounts offer the same 100% return to zero capability of the other mounts, with tool-less mounting and instant self locking via the patented Sidelok system. To learn more about the RMR and other KDG Sidelok mounts, check out their website our stop by booth #3166 at SHOT SHOW next week.
The KDG RMR Sidelok mount allows for the popular Trijicon RMR optic, and other brands that share the same mounting base to benefit from KDG Sidelok Technology! The lightweight, 3.4 oz mount pairs with all models of RMR to carry an overall weight of 4.4 oz assembled. Made from high strength 6061 aluminum, the Sidelok mount allows for instant attachment or detachment of the optic to the firearm. This is facilitated with no tools or adjustments, can be accomplished with one hand even while wearing gloves, and with 100% repeatable return to zero! The RMR Sidelok is perfect for lightweight firearms and those that swap optics out for different shooting environments.
MSRP: 139.00
The KDG RMR Low Profile Sidelok mount allows for the popular Trijicon RMR optic, and other brands that share the same mounting base to benefit from KDG Sidelok Technology! The lightweight, 2.4 oz mount pairs with all models of RMR to carry an overall weight of 3.4 oz assembled. Made from high strength billet 6061 aluminum, the Sidelok mount allows for instant attachment or detachment of the optic to the firearm. This is facilitated with no tools or adjustments, can be accomplished with one hand even while wearing gloves, and with 100% repeatable return to zero! The RMR Low Profile Sidelok mount is perfect for lightweight firearms and those that swap optics out for different shooting environments. This mount does not offer co-witness with any AR-15 style iron sights, but will provide a lower profile setup for those using the mount on shotguns, AK-47s, submachine guns, belt-fed weapon systems, etc.
MSRP: 109.00
The Magpul® MS1 QDM Sling further enhances one of the most versatile line of rifle slings by including factory-installed Magpul QDM quick-disconnect swivels. As a heavy-duty replacement for the typical pushbutton swivel, the Magpul QDM offers an innovative low-profile design, single-handed manipulation, a superior corrosion-resistant Melonite® finish, and a high-strength, freely rotating bale that canalizes sling webbing to prevent rollover. This sling system not only provides the strength, speed and security of Magpul QDM hardware, but is also optimized for dedicated two-point sling functionality built around the streamlined MS1 Slider. Once set, this system allows for rapid adjustments to either lengthen or shorten the sling without slippage, tails, loops or other potential snag hazards. In a two-point role, the MS1 allows seamless shoulder transitions, fast adjustability for hands-free rifle carry and shooting support from various positions. The Magpul MS1 QDM Sling retains all of the original MS1 functionality and is fully adaptable for one-point applications with a series of adapters (sold separately) based on the MS3® and MS4® Slings.
In testing, the MS1 Sling survived tens of thousands of cycles in wet, dry and sandy conditions, static-load testing without slippage for 72 hours, and weighted six-foot dynamic drop tests. In addition to the controlled lab tests, we also swam with it, jumped with it, hunted with it, hiked into the mountains with it, and—most importantly—shot with it in a variety of rugged field conditions. The Magpul MS1 QDM Sling is made in the U.S.A. and is fully Berry Amendment compliant.
FEATURES
• Factory-installed Magpul QDMs constructed of Melonite® finished steel for strength and extreme resistance to wear and corrosion
• Dedicated two-point sling that can be configured for one-point functionality with optional adapters
• Secure and rapid length adjustment with MS1® Slider
• No tails, loops, or other potential snag hazards
• Lightweight, yet durable slider and buckle hardware made of reinforced engineering polymer
• Proprietary weave, 1-1/4” wide nylon webbing is strong and abrasion-resistant while tubular construction provides anti-chafing user comfort
• Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
COLORS:
Black and Coyote
MSRP:
$74.95
Quickly reconfigurable between one-point and two-point operation, the Magpul® MS4 QDM Sling enhances the proven MS4 Dual QD Sling Gen2 by including factory-installed Magpul QDM quick-disconnect swivels. As a heavy-duty replacement for the typical push-button swivel, the Magpul QDM offers an innovative low-profile design, single-handed manipulation, a superior corrosion-resistant Melonite® finish, and a high-strength, freely rotating bale that canalizes sling webbing to prevent rollover. This sling system not only provides the strength, speed and security of Magpul QDM hardware, but also maintains compatibility with the standard QD sling cup interface found on many handguards, lower receivers, receiver end plates and buttstocks.
Based on the streamlined two-point MS1® Sling adjustment system, the Magpul MS4 QDM Sling retains the low-profile quick-adjust slider which minimizes bulk and allows for secure, yet effortless adjustment. Webbing length is optimized for a comfortable fit with all body types and body armor configurations.
The Magpul MS4 QDM Sling is made in the U.S.A. and is fully Berry Amendment compliant.
FEATURES
• Factory-installed Magpul QDMs allow rapid conversion between one and two-point configurations
• Swivels and D-Ring are constructed of Melonite® finished steel for strength and extreme resistance to wear and corrosion
• Secure and rapid length adjustment with MS1® Slider
• No tails, loops, or other potential snag hazards
• Lightweight, yet durable slider and buckle hardware made of reinforced engineering polymer
• Proprietary weave, 1-1/4” wide nylon webbing is strong and abrasion-resistant while tubular construction provides anti-chafing user comfort
• Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
COLORS:
Black and Coyote
MSRP:
$79.95
Expected to ship in March 2018.
A smooth and consistent reload is essential tactical or competition use. The Precision Rifle DBM magwell features an oversized magwell enabling mag changes to be nothing less than smooth and consistent.
M5 Inlet
AI pattern magazines
Large magwell lead in
Front barricade stop
Billet Aluminum
Mil-Spec TypeIII Hard anodized
Pillars and screws included
MSRP: $179.00
www.seekinsprecision.com/parts-and-accessories/bolt-rifle-parts/ai-tactical-dbm
For Immediate Release – Dorset, England, U.K. – Shield Sights is pleased to announce the release and full production of the RMS-C. The RMS-C is a compact variation of the RMS that has been specifically designed to be a perfect fit on sub-compact or slim frame pistols.
The RMS-C is an answer to the rising demand for red dot sights on compact EDC pistols. Until now there has never been a red dot sight that maintains full functionality in a slim and aesthetically pleasing package for sub-compact pistols like the Glock 43 and Smith & Wesson Shield.
“After years of declaring that we make the smallest sights we noticed a space that was not being serviced by anyone. Brought to our attention because the customer base was now happy to mount the RMS on to sub compact pistols and accept the sight overhanging the slide, this was not acceptable to Shield so we set the task of miniaturising our RMS to fit the century old 1911/2011 slides, Glock 43’s, Smith & Wesson Shield’s and other single stack pistol slides.”
The RMS-C has the same bolt pattern as the original SMS/RMS so users with slides already cut for the RMS can easily swap sights if they choose to.
Features:
– The RMS-C is machined from strong aerospace grade aluminium.
– Very fast automatic brightness adjustment
– No overhang on G43 or S&W Shield
– Very low profile to Co-Witness standard iron sights
– 2-3 year average battery life with standard CR2032 battery
– Weight: 17 grams / .60 ounces battery included
