Happy Thanksgiving
November 26th, 2015Outland Equipment – Kryptos K2 Knife
November 26th, 2015Outland’s Kryptos knife was developed with American Special Operations Forces as a knife for optimum concealed carry, swift and natural draw, and reliable retention. The handle’s shape and sheath profile was designed for discreet horizontal carry, and the sheath is ambidextrous for left or right-handed draw. The handle’s pinky hook is designed to give the user’s hand a secure location for a quick draw, and the handle also has jimping for additional bite. Included in the kit is an aluminum trainer with blunt edges and a rounded point. The trainer handle geometry and sheath draw match the live knife. Kryptos is available in both single and double edge versions.
Full tang CPM 3V steel construction
Single or double-edged versions
3.7 inch primary cutting edge
G10 handle grips
Deep finger choil and aggressive jimping for a secure grip
Pinky hook allows for fast, sightless grip acquisition and sheath draw
Sheath straps horizontally along your belt
www.outlandequipment.com/product/kryptos-k2
New A-TACS iX Camo Gear From UR-Tactical Now Available
November 25th, 2015Digital Concealment Systems has announced UR-Tactical adopting the new A-TACS iX pattern for their new OPS Battle Uniform and other gear. I’ve got to say, I’m really digging this pattern. It’s unlike anything else out on the market right now. The full release can be read below:
UR-Tactical and A-TACS Camo bring you the latest in a new generation of concealment with their new OPS battle Uniform now available in New A-TACS iX Camo! New A-TACS iX Camo is the first pattern introduction in the new “X” camo lineup and is designed not only to work in transitional environments but also to work when paired up with our AU and FG pattern variants.
UR-Tacticals’ OPS Direct Action Pants are cut from 50/50 NyCo in New A-TACS iX Camo and feature integrated and removable molded knee-pads surrounded by 500D Cordura for added re-enforcement and full-length side zippers that extend from the bottom of the leg to the hip. the lower legs are also fitted and re-enforced with 500D Cordura. The waist features a Hook and Loop closure.
The OPS Direct Uniform Top is cut from New A-TACS iX Camo 50/50 NyCo. Additional features include top and side entry chest pockets for easier access while wearing body armor, Slanted shoulder pockets with Velcro Panels for patches. The sleeves also feature integrated removable elbow pads. There is a fill-zip closure in the front and four pockets on the arms. Completely re-designed for a better fit.
For additional information or to order today, visit them online at: www.ur-tactical.com.
The Details – UNITED STATES OF AMERICA v. L-3 COMMUNICATIONS EOTECH, INC., L-3 COMMUNICATIONS CORPORATION, and PAUL MANGANO
November 25th, 2015As most of you know by now, the US Government sued L-3 Communications and its subsidiary EOTech as well as EOTech’s CEO, Paul Mangano for fraud regarding issues with their Holographic Weapon Sights which have been purchased by the Departments of Defense, Homeland Security, and Justice. While we have provided a copy of the case, many won’t take the time to actually read it so we’ve extracted some of the pertinent information for you. What the Government’s attorneys have done is demonstrated a pattern of fraudulent behavior on the part of L-3 on how the sights work in various environments. In particular, they’ve named EOTech CEO Paul Mangano due to his part in the scheme.
This is a civil fraud action by the United States of America (the “United States” or the “Government”) against Defendants L-3 Communications EOTech, Inc. (“EOTech”), L-3 Communications Corporation (“L-3”), and EOTech’s President, Paul Mangano (“Mangano,” and collectively with L-3 and EOTech, “Defendants”), to recover treble damages and civil penalties under the False Claims Act, 31 U.S.C. § 3729 et seq., and damages under the common law theories of mistake of fact and unjust enrichment, arising from a scheme to defraud the United States Department of Defense (“DoD”), the Department of Homeland Security (“DHS”) and the Federal Bureau of Investigation (“FBI”) in connection with EOTech’s knowing sale of defective holographic weapon sights (also referred to herein as “combat optical sights” or “sights” and sometimes abbreviated “HWS”).
The suit shows that EOTech knew about issues as far back as 2006 and failed to alert the Government. Rather, the Government had to discover the issues on their own.
Since at least 2006, Defendants knew about defects in their weapons sights that caused product failures, particularly in the extreme environmental conditions in which Special Forces operate. Instead of making a prompt disclosure of the defects, Defendants delayed disclosure for years, until they believed they had a fix or were compelled to make a disclosure because of employee or other complaints.
By 2006, Defendants knew that the sights failed to perform as represented in temperature extremes. Specifically, they learned that the sights experienced a condition referred to as “thermal drift,” meaning that the sight’s point of aim differed from its point of impact (or “failed to hold zero”) when subjected to hot or cold temperature. Although EOTech was contractually required to disclose any information concerning the reliability of the sights, EOTech waited nearly a decade to disclose the defect. In more recent years, as EOTech subjected new models of the sights to qualification testing, the test engineer documented thermal drift in every sight tested in report after report. Finally, in March of 2015, the FBI independently discovered the thermal drift defect and presented EOTech with the very same findings that the company had documented internally for years. Shortly thereafter, EOTech finally disclosed the thermal drift defect to DoD.
By early 2007, Defendants knew of a separate performance failure in cold temperature. Beginning around 32 degrees Fahrenheit, the sights’ aiming dot became significantly distorted, affecting the accuracy of the sight and worsening as the temperature approached -40 degrees. At sub-zero temperatures, the distortion of the aiming dot affected the accuracy of the sights by more than 20 inches for every 100 yards. EOTech delayed disclosing the defect for more than a year, and until it had a fix in place. Even then, EOTech presented its fix to DoD as an upgrade to a quality product that already conformed to specifications.
By 2008, Defendants also knew that their sights failed to perform as represented in humid environments. Defendants knew that the sights leaked, allowing moisture to enter and causing a degradation of the reticle (i.e., the circle and aiming dot in the sight necessary for acquiring a target). Although the sights were always sensitive to humidity, in 2008 EOTech inspected a large shipment of returns from DoD and noticed damage caused by moisture in nearly every sight. In the years that followed, moisture-related complaints (typically dimming or disappearing reticles) became the number one reason for EOTech’s customer returns, and EOTech’s own testing repeatedly confirmed that the sights were not properly sealed and quickly degraded when exposed to moisture.
Defendants, however, waited to disclose the problem until 2013, when, once again, they believed they had arrived at a solution. And again, EOTech pitched its fix as an upgrade to a
quality product that conformed to specifications.
Once again, EOTech never disclosed these issues to the Government. Instead, internal testing at the FBI brought them to light.
Finally, in March 2015, the FBI discovered what EOTech had known for years. In conducting its own testing of the sights for zero stability, the FBI exposed the sights to normal temperature variations for the state of Virginia, a temperature range much narrower than -40 to 140 degrees Fahrenheit. A ballistics team then tested the sights for point of aim/point of impact accuracy, or zero stability, and similarly found significant drift at both higher and lower temperatures.
After discovering the problem in March 2015, the FBI immediately presented its findings to EOTech. Shortly thereafter, EOTech disclosed the issue to Crane, but stated that the problem was only recently discovered and that it was devoting substantial efforts toward finding a solution.
When asked about the company’s previous efforts at finding a solution for thermal drift, a former EOTech optics engineer explained that the company knew for years that thermal drift was an inherent design flaw with the “Generation II” model of the product that was specially designed for military use, and that no fix existed without substantial modification of the product.
Many have wondered why CEO Paul Mangano was specifically named. The key is in this passage from the suit:
Both Mangano and EOTech’s contracting officer acknowledged that EOTech was contractually obligated to notify Crane if the sights deviated from the contractual specifications. Mangano also testified that L-3’s ethics policy requires disclosure of quality issues to the Government.
And this:
The decision maker on disclosure of quality-related defects was Mangano. As the Co-founder testified, until a solution was in place, Mangano “did not want this [defect] disclosed to the marketplace at all and he specifically communicated that.” According to two EOTech employees, the Co-founder fought repeatedly with Mangano over whether to disclose the distortion defect, with the Co-founder supporting immediate disclosure and Mangano opposing it. Moreover, Mangano admitted at a deposition that the decision to disclose a quality issue to a customer ultimately was his.
Mangano’s decision to hide defects goes back to at least 2007.
By email dated September 16, 2007, Mangano reported to other senior managers that “[t]he take-away from this past Friday’s Red Review is that we will not be in a position to fully disclose to Crane and Colt/Canada [a Canadian EOTech customer] until November at the earliest.” Mangano added that “[w]e will only disclose to Crane and Colt/Canada. Given that we have no product returns over the years from other military customers reporting the issue, we see no need to communicate the patent defect.”
Internally at EOTech, employees knew this course of action was wrong. This statement may be the most damning of all.
Shortly thereafter, a sales and marketing employee wrote to the Co-founder “in confidence” about Mangano’s email, stating, “I have an issue with this . . . Is it worth risking one person’s life on this? What if there is a guy in the mountains in Afghanistan, and he brings up his sight picture on the enemy who has the drop on him with an AK[?] He takes aim as quickly as possible and puts a shot that misses wide due to the distortion of the reticle. He’s dead a fraction of a second later from a 7.62 mm round. This is a dramatic example, but this is the risk that is posed the longer the end-user is unaware of the risk.”
The sales and marketing employee added that “[w]e have been sitting on this issue for a long time and it makes me very uncomfortable that we have still done nothing about this to protect soldiers and LEOs [law enforcement officers] of both this country and those across the globe from getting killed. What if it has happened already?
Another issue that comes up in the suit is that Naval Surface Warfare Center Crane, which acts as Program Manager for Special Operations Forces Weapons on behalf of USSOCOM needs to institute a more robust testing and quality control regimen. I believe that they relied too heavily on the vendor (L-3 Communications) to self monitor for adhering to specifications. While this may have made sense early in the war, in order to quickly field equipment to troops in the field, there has been plenty of time to allow acquisition best practices to become the norm. Additionally, if EOTech is an ISO certified company, someone needs to conduct a thorough audit.
While L-3 Communications was quick to settle the suit with a $25.6 Million fine, we wait to see if the Government will recommend debarment for L-3 Communications, just EOTech, or not at all. Additionally, there are several other user groups not represented in this suit, such as State and Local government agencies, domestic consumers and international customers.
We have extracted some of the most significant sections of the suit, but we still encourage you to read the entire filing which is available here.
TYR Tactical – Huron Wind Shirt
November 25th, 2015The Huron Wind Shirt is a minimalist garment, designed to be lightweight, durable, and ultra-packable. It is made with 100% nylon, 40D, shadow box rip stop fabric, weights only 3.9 oz. and “packs down so small you can stuff it in your pocket.”
Design & Functionality
o True minimalist design is sleek with no pockets or excess material. The 40D shadowbox ripstop has a soft feel and is quiet. Quarter zip allows for easy on and off while reducing weight. Drawstring collar and waist allow the wearer to trap heat and keep out the wind. DWR coating sheds light rain and moisture. Designed to be worn either under or over other pieces, the Huron Wind Shirt has a slim design but allows enough room for layers and freedom of movement.
Features
o DWR treated for water repellency
o Quarter zip for weight reduction
o Elastic cuffs
o Fitted collar with drawstring
o Drawstring waist
o Comes in a 9″ x 3.5″ stuff sack
o Wt. 3.9 oz
o Sizes: SM-2XL
o MultiCam
High Angle Solutions – DMM – BAT Plates
November 25th, 2015Developed with professionals in the rescue industry, DMM’s range of rigging plates integrates design, performance and strength. CNC machined from aluminum alloy which is then heat treated to make DMM’s Bat Plates super strong, surprisingly light and incredibly versatile. The ‘Bat’ shape minimizes height loss in complex rigging scenarios, while generous radii allow direct attachment of textiles, ropes and connectors.
High Angle Solutions is a weekly feature by DMM and CTOMS.
VZ Grips – VZ KeyMod Grips
November 25th, 2015November 24th, 2015
VZ Grips the original innovator (and authority) for custom G10 gun grips is proud to announce its newest artistically crafted product. The VZ KeyMod grips (KMG). The KMG’s are attachable grip panels for your favorite KeyMod platform. They are precision machined in VZ’s very sought after proprietary textures and G10 colors. With innovation and function as their leading edge VZ did not just bring you their best, but partnered up with gun accessory giant Bravo Company USA® to bring even more to the table. All KMG’s feature BCM’s new patent pending Inverted KeyMod screw. Designed by Eric Kincel, BCM’s Director of Product Development and designer of the KeyMod system. BCM’s proprietary nut-less screw is an awesome feature for the KMG’s; it eliminates extra hardware and uses a T15 torx head that is already a standard for many of the VZ grip screws.
“We have been observing the rifle market for some time, and saw that there was a general lack of functional grip panels for the newer rail systems. We decided to design a product that would offer a true solution and when we partnered with BCM to utilize their proprietary KeyMod screw it was a no-brainer. Just another competitive advantage for us and a better product for the shooter.” -John VanZyck (President, VZ Inc.)
KMG’s will be available in 2” and 4” panels, 2 different contours, 3 different textures (Alien, RECON, Tac Diamonds), and numerous color schemes that match their existing handgun line. MSRP starts at $24.75 for the 4” and $22.75 for the 2”.
Learn more at: www.VZGrips.com