SIG SAUER - Never Settle

HSP Winter Problem Solver AAR – TD2-TD5

April 23rd, 2013

Tactical Fanboy attended the Haley Strategic Partners Winter Problem Solver course in Telluride, Colorado from March 31st through April 4th. This was his first time attending a mountaineering/survival course and this AAR is in his voice. You can read about the equipment he used here and TD1 here.

IMG_0919

At the start of TD2, we met up at HSP headquarters, did an equipment weigh-in, then loaded up our packs and took a 1-1/2 hour drive towards the staging area. After being assigned to our teams (I was assigned to Team 1) and undergoing a team exercise, a map folding competition for speed, we headed towards the campsite. Early on in the march towards camp we underwent a simulated rescue mission, looking for victims [beacons] trapped under the snow. Team 1 headed downhill and managed to find two beacons, wading through thigh-deep snow in the process; Team 2 took the high ground and also found two beacons. Afterwards, we discussed the exercise and continued our march towards base camp.

IMG_0927

524007_504282686305153_1625506351_n

One fairly challenging march later, featuring a modest incline, switchbacks, and requiring the use of our showshoes, we made it to the campsite. It was a wooded area featuring a hut, outhouse, and trash/recyclables area. The hut was home base for the majority of the class. It featured a stove and 8 sleeping mats, and functioned as a (mostly) dry place to eat or undertake a bit of classroom instruction. Our packs, and by extension most of our gear, was stored outside most of the time, hung on a rack.

IMG_0954

Throughout TD2 through TD4, we practiced a variety of survival and mountaineering skills:

554090_503901519676603_2143652251_n

72634_503901499676605_852201903_n

Shelter building was a primary focus. We built two shelters during our time at the campground; every attendee was required to sleep at least one night outside (I slept two). Team 1 completed two separate hybrid snow trenches/caves, while Team 2 completed two separate snow caves, the latter of which was large enough for at least six people, eight if space wasn’t a concern.

528384_504282699638485_1137319555_n

We practiced techniques for efficiently traversing up and down a slope. These techniques included different foot positions and use of our ice axes as another point of contact and for self arrest in case of a fall. We also practiced glissading.

533411_503569419709813_628907841_n

We did a brief class on fire building. Afterwards, we were tasked with building a fire of our own. We separated into our teams and had to built a fire using a striker, a bit of a starting material, and whatever we could gather from the environment.

526647_503569569709798_1641397786_n

We practiced rope work as well. Aside from a few important knots, including the double fisherman’s knot, multiple forms of situational figure eights, and the munter mule, we also worked on rappelling and ascending on a rope, and the use of a pulley system, primarily for pulling up a rescue litter.

73177_503569489709806_192873054_n

Other skills we worked on included navigation, methods on how to transport an injured person, and additional rescue work in the form of hunting for buried beacons.

534350_503901583009930_1546940938_n

IMG_0987

At the start of TD5, we rose just before sunrise and cleaned up camp. We then geared up and started to descend from the camp grounds. Shortly after our return started, Travis announced a helicopter was coming to pick us up. We prepped our gear and went in two chalks; a third trip was made to transport our gear. It was my first time ever riding in a helicopter and it was an exhilarating experience.

IMG_1047

IMG_1066

IMG_1072

We were dropped off at Telluride ski resort before the general public arrived so we could undertake our final challenge for the class, reaching the 13,230ft Palmyra peak. This involved traversing the increasingly steep ridge using minimal equipment. Thankfully, one of the ski resort SAR personnel was willing to make the climb first, placing footholds for the rest of us to use. Although that did take away some of the difficulty, it was still a challenging endeavor.

63569_503901633009925_1128325949_n

When we reached the peak, we enjoyed a “special treat”, took some photos, and began our descent, retracing our path up. It was a bit faster going down, but also required using some of the descent techniques we practiced earlier in the week. As we returned, the skiers started to flock in. More than a few were grateful that there was already footholds available thanks to our ascent. It was a fantastic end to the class proper, and of course we took the obligatory final class photo:

62816_504282899638465_1267430166_n

With this, the class was all but over. We descended into Telluride using the fantastic gondola system, where we enjoyed a great meal at a restaurant called ‘Oak…The new Fat Alley’. We then said our thanks and goodbyes to our two resident SAR personnel, and made the long drive back to HSP headquarters where we gave back our issued equipment, received our certificates of completion, and reflected on the class.

Final note: The Winter Problem Solver course offers a wealth of information regarding survival in a winter environment and mountaineering in general. However, due to the relatively short duration of the course in conjunction with the volume of information, it shouldn’t be considered a definitive source of skills for either of these topics; rather, it should be treated as more of an introduction. Additionally, this particular Winter Problem Solver was a “beta course” in that it was the very first run of the course. I can all but guarantee the course will become further refined and may even change in content as further courses are planned and run.

2013 Kryptek Product Catalog

April 23rd, 2013

The 2013 Kryptek Camouflage catalog is out. They’ve got some great looking stuff coming out. Download your copy.

Kryptek Catalog

www.kryptek.com/catalog/2013-kryptek-catlog

‘Shot Heard ‘Round The World’ Roundup

April 23rd, 2013

On 20 April I was fortunate enough to join over 100 of my fellow gun owners for a celebration of Patriot’s Day, Second Amendment-style.

_MG_1397

There were classes and folks from all over and ladies and exotic weapons vendors. And, there was lots of shooting. There was even some great photography from Kevin Markland. Make sure you check out this gallery to see what you missed.

Most of all, I want to thank Snake Hound Machine and the other sponsors for putting this together.

Snap-On Quick Strap from National Molding

April 22nd, 2013

NatMo Snap-on Quick Strap

www.nationalmolding.com

Sneak Peek – PenCott Pathfinder BDU from Hyde Definition

April 22nd, 2013

Hyde Definition recently gave us a look at their upcoming Pathfinder BDU. Named in honor of WW II’s paratroopers, naturally, the Pathfinder will feature the PenCott patterns. It’s Berry compliant and uses the ACU fit block so finding the right size won’t be an issue.

20130421-211747.jpg

The Trousers

20130421-211857.jpg

The trousers feature large cargo pockets with button down flaps.

20130421-211919.jpg

There is also a zippered compartment behind the main zipper.

20130421-212218.jpg

The double knees will accept padding.

20130421-212011.jpg

Additionally, there is a lower leg pocket similar to the ACU with a hook and pile tape flap.

20130421-212034.jpg

The rear of the waist is slightly higher than the front to prevent sagging and the pockets are of a horizontal slash type, both front and rear.

20130421-211941.jpg

The button waist also offers a tape to tighten the pants in the event of weight loss.

20130421-212148.jpg

The Jacket

The jacket’s two chest pockets are angled slightly outboard and rely on hook and pile tape flaps. The zippered Napoleon-style openings seen on this prototype will not be included on the production model.

20130421-212319.jpg

The stand up collar does not utilize hook and pile tape and can be worn up or down. The front is zippered with a flap secured with hook and pile tape.

20130421-212245.jpg

As with the ACU there’s a bi-swing back for comfort and reach as well as hook and pile tape cuffs.

20130421-212516.jpg

The inset sleeve pockets are zippered and so far do not include QuietLoop patches although this may be offered as an option.

20130421-212617.jpg

Look for the Pathfinder BDU as well as a few other surprises in early Summer from Domari Nolo, Predator BDU and Tactical Gear Now.

hydedefinition.com.

LiteFighter Updates Their Shelter System

April 22nd, 2013

LiteFighter has updated their LiteFighter 1 Shelter System featured in the past here on SSD. It combines a Permethrin treated bug net with tub floor designed to fit a GI cot with a waterproof rainfly that turns it into a versatile shelter system. The rainfly includes dual vestibules for storage and the shelter offers dual side openings, internal stowage pockets, gear loops and pile strips for hook-backed nametapes.

Shelter Colors

LiteFighter shelters are available for unit and agency purchase through ADS Inc. Be sure to check them out at this week’s Warrior West Expo in San Diego.

www.litefighter.com

Blue Force Gear to Exhibit at Warrior Expo West

April 22nd, 2013

Blue Force Gear® will be displaying at the ADS Warrior Expo West Show on April 24 – 25 at the San Diego Convention Center in San Diego, California. Military and Law Enforcement end users who would like to increase performance by switching to the lightest tactical nylon equipment, please email sales@blueforcegear.com to make an appointment or come by to meet the Blue Force Gear team and discuss your needs.

Also, stayed tuned to SSD for live coverage of Warrior Expo West and a special announcement from Blue Force Gear.

Relax, SPS Isn’t ‘Cancelled, Cancelled’…It’s Just ‘Cancelled’

April 22nd, 2013

Last Friday started out as a pretty bleak day for many in the Soldier Systems Industry as they began to receive letters from the Contracting Officer at Aberdeen Proving Grounds responsible for the Soldier Protection System, cancelling several portions of that solicitation.

The news spread like wildfire, first among the sub-contractors and then to their affiliates. Contractors and their subs had spent Millions of dollars and untold man hours to answer the complicated Requests for Proposals for the most ambitious Soldier Systems development program in over a decade.

Soldier_Protection_System
(Photo – HP White)

SPS is a multi-year program that will pit several commercial development teams against one another in several areas in order to leap capabilities ahead. Unlike past Soldier Modernization efforts that relied heavily on C4ISR development, SPS looks for real solutions for load and Soldier protection challenges. According to the Army, “the goal of the SPS is to provide Soldiers with modular, scalable and mission tailorable protection to reduce weight and increase mobility while optimizing protection.”

SPS consists of six areas; Integrated Head Protection System, Transition Combat Eye Protection, Torso Protection, Individual Soldier Sensor System, Vital Torso Protection and Extremity Protection. Recently,

Late Friday, I was able to speak with officials at PEO Soldier and they clarified what had transpired by issuing this statement:

PM SPIE cancelled Requests for Proposals for the extremity protection system (EPS) and torso protection system (TPS) portions of the Soldier Protection System (SPS). The cancellation will allow writing of new Requests for Proposals that will contain language and industry incentives to encourage greater creativity in developing protection solutions and broader industry participation in the program.

Their message? All hope is not lost, we will reissue this and we want you to participate again.

Unfortunately, the letters received from Aberdeen aren’t so hopeful. Regardless of program component, they stated:

Specifically,the Government determined that the Technical Statement of Needs (TSN) did not adequately describe the Government’s requirement and the current approach does not effectively state the Government’s goal and intent.

What the cancellation letters reveal is that the Army has changed its mind about what it wants, after asking an industry already on the ropes due to drastic cutbacks in procurements, to risk large sums of money in order to support its needs. Some who worked on the proposals have shared their concerns that now that the Army has seen what they have come up with, that it may write those concepts into a future requirement and give others a leg up. Additionally, if the Army reissues the solicitation in the future, companies that were not competitive enough to participate in this last go around will have additional time to work on a proposal. This is hardly fair to the companies who went all in. But, if the Army doesn’t recompete the requirement, there will be no chance to recoup those dollars for anyone. Times are tight. A couple more of these debacles and some companies are going to succumb to this tough market.

Army acquisition officials need to vigorously vet their requirements to ensure our troops remain the best equipped in the world but also to ensure the industry it relies upon remains healthy to support the Army in the future. Please, no more false starts or wild goose chases. The American people and industry can ill afford it.