GORE-TEX Professional - AWICS

Gunfighter Moment – Mike Pannone

April 20th, 2013

Examining the gross versus fine motor skills debate

Anyone that wants to refine and enhance their chosen trade must follow this simple logical process of critical thinking: establish a desired end-state and then: know what you do, why you do it, how it works, where the common failure points are and why it is the best solution. Then you will be able to defend it against competing solutions or techniques when challenged. That is impossible when undefined or misdefined terms are used.

Often instructors will invoke the “fine versus gross motor skill” argument to justify or invalidate a technique without ever defining the terms. Truth be told many don’t even know what each term means. The below definitions should illuminate where these have gone awry and when they do properly apply.

Because the motor skills used for weapons handling at times may not lie specifically on one side or the other of the definition it is often taken as all skills are fine motor functions (think slow precise trigger pull on a precision shot versus a rapid pull of the trigger on a short range rapid string as an action using both). Two perfect examples of gross motor skills that are mischaracterized as fine motor skills are releasing the bolt via the bolt catch on an Stoner pattern rifle and the slide via the slide stop on a pistol. Neither involves “a refined use of the small muscles controlling the hand, fingers, and thumb.” Both are in fact either the use of the locked wrist, extended thumb and the entire arm on an M4 bolt release or the complete clenching of the hand on a pistol to release a slide stop given appropriate hand size or the use of the support side thumb to release the slide. Both when done properly place the hand on an anchor point on the weapon as a way to rapidly and precisely orient the active hand and thumb to the necessary location (tactile index points). Tactile index points are the magazine well on an M4, or a proper grip on a pistol when using either the dominant or support side thumb.

***How could a shooter effectively operate a trigger or magazine release on a pistol or carbine but not be able to operate the slide stop or bolt release?***

• “The term gross motor skills refer to the abilities usually acquired during infancy and early childhood as part of a child’s motor development. By the time they reach two years of age, almost all children are able to stand up, walk and run, walk up stairs, etc. These skills are built upon, improved and better controlled throughout early childhood, and continue in refinement throughout most of the individual’s years of development into adulthood. These gross movements come from large muscle groups and whole body movement.”

• “Fine motor skills can be defined as coordination of small muscle movements which occur e.g., in the fingers, usually in coordination with the eyes. In application to motor skills of hands (and fingers) the term dexterity is commonly used. The abilities which involve the use of the hands develop over time, starting with primitive gestures such as grabbing at objects to more precise activities that involve precise hand-eye coordination. Fine motor skills, are skills that involve a refined use of the small muscles controlling the hand, fingers, and thumb. The development of these skills allows one to be able to complete tasks such as writing, drawing, and buttoning.”

The terms used to frame a discussion and the definitions of those terms must be correct or all subsequent assertions will be incorrect. Skill and knowledge rarely exist apart from each other.

-Mike Pannone

Terms quoted or adapted from:
A Topical Approach to Life-Span Development
John W. Santrock, PhD University of Texas at Dallas
ISBN: 0073382647
Copyright year: 2008

Mike Pannone retired from the Army’s premier assault force (1st SFOD-D) after an explosive breaching injury. A year after his retirement America was attacked on 9/11 and he returned to help serve his country as the head marksmanship instructor at the Federal Air Marshals training course and then moved to help stand up the FAMS Seattle field office. In 2003 he left the FAMS to serve as a PSD detail member and then a detail leader for the State Department during 2003 and 2004 in Baghdad and Tikrit.

In 2005 he served as a ground combat advisor of the Joint Counter IED Task Force and participated on combat operations with various units in Al Anbar province. Upon returning he gave IED awareness briefings to departing units and helped stand up a pre-Iraq surge rifle course with the Asymmetric Warfare Group as a lead instructor. With that experience as well as a career of special operations service in Marine Reconnaissance, Army Special Forces and JSOC to draw from he moved to the private sector teaching planning, leadership, marksmanship and tactics as well as authoring and co-authoring several books such as The M4 Handbook, AK Handbook and Tactical Pistol shooting. Mike also consults for several major rifle and accessory manufacturers to help them field the best possible equipment to the warfighter, law enforcement officer and upstanding civilian end user. He is considered a subject matter expert on the AR based Stoner platform in all its derivatives.

www.ctt-solutions.com

Gunfighter Moment is a weekly feature brought to you by Alias Training & Security Services. Each week Alias brings us a different Trainer and in turn they offer some words of wisdom.

HSP D3 Chest Rig – The Video

April 20th, 2013

haleystrategic.com/nylon

ZipperMend

April 20th, 2013

20130419-085149.jpg

ZipperMend is a cool DIY fix for a broken zipper pull. Granted, many of you are going to tell me how you use 550 on all your zipper pulls and that’s fine. But others are going to have garments and bags that they don’t want 550 on. And this is where the ZipperMend comes in. Available in Black, Silver, and Antique Brass. ZipperMend works like a scissors with a central pivot. You simple close the loop around your zipper slide and voila; fixed!

zippermend.com

Another Shot of the HSP Chest Rig

April 20th, 2013

20130419-200102.jpg

haleystrategic.com/nylon

Grey Ghost Gear Lightweight Assault Pack in Kryptek Typhon Almost Gone

April 19th, 2013

20130419-085938.jpg

Grey Ghost Gear is down to less than 2 dozen of their Lightweight Assault Packs in Kryptek Typhon and the price is great.

www.greyghostgear.com/kryptek

Introducing The HSP Disruptive Environments Chest Rig

April 19th, 2013

Haley Strategic Partners has been working to perfect their chest rig for some time now and over time I’ve seen a couple of variants as they’ve dialed in the design. It’s intended for low profile work, yet adapts to many applications. In addition to working well for wear under clothing it can also be directly attached to armor systems that incorporate Velocity Systems’ SwiftClips.

HSP Rig

The Chest Rig features:
– 4 bungie retained magazine pouches for M4, M16, and AK
– 2 Multi-Mission Pouches which fit standard double and single stack pistol magazines as well as other equipment including flashlights and multi-tools
– 2 flapped GP pouches for strobes, tools and other equipment
– 1 STUFFIT™ pouch, an expandable design meant to hold smoke grenades and electronics or compress down to near flat

Offered in Black, Coyote and MultiCam as well as Kryptek Highlander, Mandrake and Typhon.

HSP Rig 2

haleystrategic.com/nylon

A Video For The Irish Garda ERU Experts

April 19th, 2013

The other day we shared a photo from the Irish Sun depicting a member wearing Arc’teryx LEAF Talos combat clothing in Wolf Grey. Some readers didn’t believe that the photo was of a Garda member since he wasn’t wearing Black. Maybe this video will help clear things up?

Here is the description:
Teams from the Irish Garda Emergency Response Unit (ERU) put on a show of strength in a large international counter-terrorism exercise in Dublin City, Ireland one day after the devastating terrorist bomb attacks in Boston City, United States.

Officers from Ireland’s elite counter-terrorist Police task force, the Garda ERU, hosted a European Union (EU) Coordinated Anti-Terror Exercise as part of Europe’s ‘ATLAS’ law enforcement network at an abandoned power generating site in Dublin. The exercise involved elements from land, sea and air, all designed to replicate a response to an extensive terror attack, either domestic or foreign.

Gardai have also confirmed that specially-trained Police men and women will undertake sea patrols during the 39th G8 Summit in Fermanagh, Northern Ireland (United Kingdom) this summer – June 2013 – to prevent against any threats to the worldwide governmental forum. The Guards will be working alongside members from the Police Service of Northern Ireland (PSNI), UK Intelligence Agencies, such as MI5 and MI6, and the British Military.

SOCOM Interested In FR Combat Shirt and Pants

April 19th, 2013

The folks at Program Manager-Special Operations Forces Survival, Support & Equipment Systems (PM-SOF SSES) office at the U.S. Army Soldier Research Development, and Engineering Center, Natick, MA have been pretty busy. Recently, they issued RFIs for Snow camo and Overwhite garments. Now, they are seeking FR combat uniforms for test and evaluation purposes as well as the the fabric that the garment is made from.

PCU level 9 Photo – US Army SFC Keith Turner

This is a pretty interesting Sources Sought Notice on a variety of levels. First off, with one exception SOF have not been using FR uniforms. MARSOC has been purchasing FR combat uniforms in Woodland camouflage from several sources for the past few years. Second, they already have an approved combat uniform that was developed specifically for their use and that the PCU Level 9. Finally, Natick has tested virtually every FR uniform fabric available. In fact, the results of that testing is available in the same building as PM-SOF SESS.

20130418-201513.jpg

The desired characteristics in this RFI are generic at best and you can see those quoted below. If the desire is to field an FR combat uniform for SOF that can be accomplished in one of three fashions with little to no risk.

20130418-201049.jpg

Both the US Army and Marine Corps already field FR combat uniforms in the form of the Army Combat Shirt and newly developed Army Combat Pant and the Marines field the Fire Resistant Operational Gear ensemble. Another option, if neither of those garments meet SOF requirements is, to take the approved PCU level 9 uniform and manufacture it from one of the myriad of FR fabrics currently available.

20130418-201202.jpg

SOCOM is seeking:
This uniform will consist of two garments; pants and combat shirt. Both will be produced with materials which provide fire resistant performance characteristics. The design and material performance characteristics are detailed below. All garments submitted to this solicitation will be reviewed and evaluated for operational efficacy. This uniform is intended for use by USSOCOM Operators, and as such must be effective in all operational environments, and be compatible with all Operator equipment.

Design characteristics:

Pants
* Sized in 2-inch waist increments
* Two front hand pockets
* Two back pockets
* Two large pleated cargo pockets
* Mechanism at lower leg hem to allow for fit adjustments of pants legs

Combat Shirt
* Collar, shoulders and sleeves shall be the same material as the pants and blouse
* Torso shall be a lightweight, moisture-wicking material
* length zipper across the center front
* Two upper sleeve pockets
* Sleeves shall have adjustable tabs at the wrists

Material physical performance:

In addition to the physical performance, any material submitted must be capable of being produced in military camouflage patterns and meet associated near-infrared requirements.

Interested companies are asked to submit one sample of the each garment, pants and combat shirt, in order to demonstrate the design. These samples must be produced in the material that is being submitted. In addition to the sample garments, please include 3 yards of the material to be utilized for physical performance testing, as well as a report showing any test results already obtained for the material. Pricing and size range for each garment should also be provided. Submissions must be received by 16 May 2013. Each company is authorized only one design and one material submission.

Currently, there are only two manufacturers that offer both their own FR fabrics as well as finished goods made from that fabric so this is a pretty curious RFI. Everyone else will be offering combat uniforms in someone else’s fabric. So the question is, what are they actually looking for? Garment designs or FR fabric solutions? Government solutions for both are readily available. Granted, a true FR solution must combine garment design with FR materials to ensure it provides ample coverage but generally, this involves tweaking of an existing garment once an FR fabric is selected.

Manufacturing these garments may well not be an option as SOCOM’s approved requirement for environmental and combat clothing is PCU and it must be manufactured by a directed source; NISH.

Perhaps this is the team’s answer to not being able to interact with industry at trade shows due to budget cutbacks and it will allow them to see the latest and greatest. Or worse yet, maybe its an unlikely case that they can’t afford to manufacture samples and it’s their way of soliciting free test samples. Although, they do say that they will buy additional garments from respondents who have a concept the Government wants to examine further.

As with all Sources Sought Notices, industry will provide their sample garment, sample fabric and proposal/pricing on their own dime. With the current state of industry (and government procurement dollars) everyone has to ask themselves whether the money expended to answer these RFIs is a good risk. Is there a real possibility of a pay off?

For those who are interested, find the Sources Sought Notice along with specific information on the FR performance specs at www.FBO.gov