FirstSpear

Cobalt Kinetics – Scrambler Suppressor

December 15th, 2023

Released in October, the Scrambler from Cobalt Kinetics apparently flew under my radar. I just ran across it at last weekend’s Grand Opening event for Scottsdale Tactical in the Phoenix area.

3D printed from Titanium using the Laser Powder Bed Fusion method, it weighs just 6.2 ounces and is 4.75 inches long. This means it only adds 4 inches to the overall length of the carbine.

The RCB 6 mount seen here from Cobalt Kinetics but it the Scrambler is also compatible with CGS Group SCI-SIX patterned devices.

Although this is a 5.56 can, it will also work with 6 ARC.

cobaltkinetics.com/product/cobalt-scrambler-suppressor

FirstSpear Friday Focus – Tiger Stripe Duffel

December 15th, 2023

From popular request, we are excited to announce the launch of our new Tiger Stripe Duffel. You asked, we delivered. These are currently short batched so if you’re one of the many folks that have been waiting for this to happen, supplies are limited — get to it!

The FS duffel features a full 500D nylon construction with 3 inch webbing that folds over into the handle for an extremely light weight design that is still incredibly strong and balanced for heavy contents. Extra large zippered opening with premium zipper hardware and FS pull tab. The top has a sewn on webbing carry strap that works great when you need to hang the bag vertically. The inside is completely open with no pockets and around 2,000 cu in. 100% Berry compliant. Made in the USA with USA Materials.

Visit FirstSpear to find American Made kit and accessories, Built For The X.

Army Leaders Chart Path to Equipping the Force

December 15th, 2023

REDSTONE ARSENAL, Ala. — Senior leaders from around the Army met both virtually and in-person for the Army Modernization Equipping Conference, Dec. 4-7 at Army Materiel Command headquarters.

The AMEC, held semiannually, brought together leadership from the four major Army commands and Headquarters Department of the Army staff sections to synchronize equipment distributions and displacements in line with Army priorities and Regionally Aligned Readiness and Modernization Model phases to achieve cohesion throughout the Army.

“We’ve been busy supporting allies and partners in multiple theaters, and that’s impacting the Army’s equipping decisions and enterprise,” said Lt. Gen. Chris Mohan, AMC deputy commanding general.

He hailed the AMEC as a key Army synchronization conference and for being an important forum that provides the chance to review equipment fielding and modernization while resolving friction points.

In addition to equipping and modernization discussions, the AMEC also addressed special topics, including Second Destination Transportation, the Decision Support Tool and an update on the Rapid Removal of Excess pilot program, which wraps up Dec. 15 at Fort Liberty, North Carolina and Fort Stewart, Georgia.

“We’re here to support the Chief of Staff of the Army’s emphasis on continuing transformation and building the Army of 2030,” said Bryan Shone, Army G-8 deputy director of program analysis and evaluation.

Chief of Staff of the Army Gen. Randy George charged Army Materiel Command to pilot a new program aimed at increasing equipment on hand readiness through focused fielding, lateral transfers and divestiture. Since October, active units at both installations have been turning in items ranging from small electronics and general supplies to military vehicles at their respective Modernization, Displacement and Repair Sites.

“Lessons learned from the R2E pilot program are being captured by AMC, Army Sustainment Command, 3rd Expeditionary Sustainment Command and U.S. Army Forces Command, all of which have a stake in unburdening our Soldiers,” said Eric Cowan, AMC divestiture team lead.

Cowan discussed the potential expansion of the pilot program and the transfer options for collected equipment, including the potential transfer of equipment to U.S. Army Security Assistance Command for partner nation opportunities for foreign military sales.

Both Mohan and Lt. Gen. Paul Calvert, FORSCOM deputy commanding general, praised the pilot program as well as 3rd ESC and the Army Field Support Battalions at Fort Liberty and Fort Stewart for rapidly identifying and collecting thousands of pieces of equipment.

“We’re going to take a pause to capture what we learned and apply it to the next iteration of the pilot program,” Calvert said. “But ultimately, we’re seeing that we’ve met the intent of unburdening the Soldier.”

The Army is using data and analytics to not only capture the amount of excess equipment in the field, but also to extend the predictability of logistics into the future for combatant commands in the European and Indo-Pacific theaters. By having better visibility of equipment and the condition it is in, AMC can predict MDRS and Organic Industrial Base operations one to two years ahead of time.

As the AMEC concluded, the resounding sentiment from participants was one of commitment to modernization and strategic alignment, underscoring the Army’s dedication to staying at the forefront of military sustainment.

“As we continue to synchronize with other big Army-wide conferences, the AMEC is only going to get better,” Mohan said. “It will continue to be the driving force behind senior leader decisions.”

Story and one photo by Lindsay Grant

With one photo by SGT Vincent Levelev

Hydra Weaponry Welcomes Mark Eliason as VP of Sales & Marketing

December 14th, 2023

Eliason, previously with Bushmaster and Windham Weaponry, brings 34 years of executive-level sales experience to Hydra Weaponry.

Hermon, Maine (December 2023) – Hydra Weaponry, Maine’s largest firearms employer, designers, and manufacturers of the truly modular MARCK-15 Hydra® Weapon System, announce industry executive, Mark Eliason, has joined Hydra Weaponry as the new vice president of sales and marketing.

Eliason began his career in the firearms industry at Bushmaster.  When CEO Richard Dyke sold Bushmaster to Cerberus Group in 2006, the company was moved out of Maine. Dyke reopened the Bushmaster facility under the new name Windham Weaponry and Eliason became VP of Sales and Marketing for the new company.

Ironic as it may seem, Hydra Weaponry is a return home for Eliason. His former boss Dyke purchased a small Maine-based firearms company called Gwinn Firearms, founded by Mack Gwinn Jr, a Vietnam Special Forces officer turned firearms designer and manufacturer. This company became known as Bushmaster. Gwinn developed the first Bushmaster pistol and rifle. Eliason recalls his first job putting together guns in Dyke’s basement in high school.

“There is a minimal learning curve for me in joining Hydra Weaponry since I have been working with variants of the original Bushmaster and modular rifles with Windham,” Eliason said. “I am looking forward to this new adventure working with Hydra Weaponry, a Maine company that manufactures innovative and versatile firearms products.”

Eliason will be drawing on his 34 years of experience in sales and marketing to increase brand awareness among distributors and dealers, as well as, create sales and marketing programs for the growing line of Hydra Weaponry firearms.

“We are very excited to have Mark on our team,” Mack Gwinn III stated. “He has the experience and relationships already built within our industry to help give our brand access to critical sales channels.

Mark Eliason will be attending the SHOT Show at the Hydra Weaponry booth 40420 and will be taking appointments. Contact laura@lauraburgess.com to set up an appointment.

For more information on Hydra Weaponry, visit the new website at www.hydraweaponry.com

Now Shipping – Dual Tension Carbine Stock from Magpul

December 14th, 2023

Magpul pulled the best features from their CTR and SL lines and added a new, locked-down auto-engaging friction lock to create the Dual Tension Carbine Stock.

The DT Carbine’s A-frame style includes a unique, non-slip butt-pad that combines the rollover footprint of the SL line with the optimized curvature of the CTR stock. The ambidextrous lever and rotation limiting QD sling mount make handling and adjustment easy, and the DT is even compatible with CTR Cheek Risers for variable cheek height.

Note: It is compatible with Mil-Spec profile receiver extensions.

The new DT Carbine Stock is now shipping in Black, with FDE and ODG coming very soon.

magpul.com/dt-carbine-stock-mil-spec

SIG SAUER M17X & M18X

December 14th, 2023

No sooner than the SIG ROMEO-M17 Red Dot Optic was released than shooters started looking for surplus M17 and M18 Modular Handgun System pistols to mount it to.

SIG listened and has launched the M17X and M18X which are commercial versions of the US military’s MHS but with the already ROMEO-M17 mounted.

Features:

-Coyote X-Carry grip module with magwell

-Flat X-Series trigger

-(3) 21rd magazines

www.sigsauer.com/m17x

Solid Black Now Available for Crye G4 Uniforms

December 14th, 2023

Solid Black is now available in the G4 Standard Combat and Field uniforms.

www.cryeprecision.com

WindSceptor Wind Speed and Range Finder

December 14th, 2023

The WindSceptor from Optical Air Data Systems is a laser wind and range finder which remotely measures wind speed, direction, and range-to-target.

The system works by firing series of 1550nm eye-safe laser pulses into the atmosphere. As the laser pulses travel through the air, a small fraction of the laser light is reflected from microscopic dust particles naturally entrained in the air. Sensors detect this reflected light and compute the speed and direction of travel of these dust particles (and consequently the speed and direction of the three-dimensional wind) using the Doppler Principle.

Thunderbolt
There are currently three devices in the WindSceptor line:

Tempest is a 3.25 lbs handheld binocular. Measurement range out to 5,000m as well as head and crosswind measurements in six range gates between 50m and 500m.

Thunderbolt is a 14 oz rifle mounted device. Measures range to 1600m and head and crosswinds from 80-100m. Thunderbolt also includes visible and near-infrared laser pointers and illuminators.

WindSceptor 4 weighs 8 lbs and features an integrated optic and integrated tripod. It ranges out to 5,000m as well as head and crosswind measurements in six range gates out to 1,000m.

All of the systems feature integrated GPS/IMU and offers Bluetooth as well as cursor-on-target data output as well an internal rechargeable battery.

Naturally, you’d immediately consider this technology for use on weapons to improve accuracy and it’s already being used for that.

However, there are applications in the aviation realm which bear consideration. For example, Combat Controllers could use a system to read winds around assault landing zones to improve safety. Likewise, Drop Zone Safety Officers could read winds on large DZs rather than relying on limited wind speed sampling using an anemometer.

www.windsceptor.com