SureFire

Archive for November, 2011

USMC Seeking Modular Armor System

Monday, November 21st, 2011

The Marine Corps posted a Sources Sought Notice late last week for a new “Modular Armor System” to replace both Plate Carrier and Improved Modular Tactical Vest which hasn’t even been fielded yet.

Marine Corps Systems Command (MARCORSYSCOM) is conducting market research, and identifying potential sources and best practice information towards designing, developing, and procuring a Modular Armor System. The system will allow the individual Marine to configure and tailor the armor level based on mission requirements.

The United States Marine Corps (USMC) envisions at this time a single system that will be capable of providing the area of coverage of the current USMC Plate Carrier and expanding to a soft armor area of coverage equal to the USMC Improved Modular Tactical Vest (IMTV) with the Pelvic Protective System Protective Overgarment (POG). The system will be able to provide supplemental armor protection to the extremities.

The envisioned system will either integrate with current hard armor ballistic plates or a new hard armor plate design. There are no constraints on symmetry or materiel for soft and hard armor. Hard Armor threat defeat capability equal to that of the XSAPI is required with a desired maximum allowable areal density of 7.0 pounds per square foot. The soft armor performance within the torso and extremity regions is required to possess performance equal to the OTV CO-PD-00-2G with a desired maximum allowable areal density of .85 pounds per square foot. The carrier will possess the Pouch Attachment Ladder System (PALS) webbing for the mounting of modular pouches, have a single pull emergency release located on the center of the vest below the neckline and integrate with the USMC Chest Rig without impeding the quick release of the carrier.

The desired system will not exceed the cumulative weight of the IMTV with torso and flank plates. This suite will enable the individual Marine to configure components to best meet specific mission requirements by optimizing/balancing human factors engineering (e.g. comfort and usability), integration with fielded Load Carriage Equipment (LCE) and cost (production and maintenance).

It is important to note that the RFI states that “Modular Armor System’s attributes have not yet been finalized” so this is your chance to help influence the writing of the final requirement.

Potential sources of supply have until 30 December, 2011 to notify the Marines of their concept. Additionally, the Program Management Office (PMO) will have representatives attending the January 2012 Shooting, Hunting and Outdoor Trade (SHOT) Show in Las Veagas. Look for a separate posting on FedBizOpps with details on how to arrange a visit.

Warlord Industries Tac Wraps

Monday, November 21st, 2011

Available now from Pimps n Mercs, the Warlord Industries “TAC WRAPS” are manufactured from Cotton and Spandex. Designed to keep the dust out, think of them as a warm weather equivalent of a headover.

FirstSpear Combat Anorak

Monday, November 21st, 2011

Developed by NFM as part of their GARM combat clothing line, the Combat Anorak has been brought to the US by FirstSpear. With a classic Anorak cut it is a lightweight garment that is intended to serve as a shell over all of your equipment. Consequently, it is very generously cut and extends down low on the torso with a lower cut on the rear. Please notice that there are no pockets on the Combat Anorak and it is simply an overgarment. It is manufactured from a lightweight, coated ripstop fabric making it wind and rain resistant.

Venting is facilitated via a quarter length zipper from chin to chest as well as a mesh insert integrated into the back flap.

Internal gear is easily accessed by a tug on a pull tab. The half moon opening features two zippers as well as a snap backup to keep the opening securely closed. You grab the tab and pull down. With practice this can be done one-handed.

Additionally, there is an access flap on the back of the Combat Anorak for packs or back panels.

The hood is large enough to fit over a helmet and features four points of adjustment which are simple to use.

Two of the hood adjustments are on the rear. That small flap covers a barrel lock that pulls the lower portion of the back toward the rear.

The shoulders are capped with lightweight Cordura and the cuffs are secured via Velcro adjustment to accommodate a wide range of layered garments. Additionally, there are small 1″ Velcro squares on both sleeves and the rear of the hood for IR or other ID squares.

The Combat Anorak stores inside an integral stuff sack and can easily be carried in a pack or cargo pocket.

Available now in Coyote size Small – 2XLarge. It is very generously cut and will easily fit over your equipment. It kind of reminds of the oversizing found on the old USGI rain suit. Depending on your climate and intended use, you may want to go down one size.

This is a great combat piece and definitely gets my recommendation. At some point I hope that they make a beefier version, from a performance fabric and integrate a lined handwarmer kangaroo pocket in the chest.

This garment is not currently made in the USA but is made in a friendly country in the Americas.

www.first-spear.com

Source One CEO & President Attends 2011 Ernst and Young Entrepreneur of the Year Gala

Monday, November 21st, 2011

Several months ago we told you that Mark Llano, Source One CEO & President was honored as the Ernst & Young Entrepreneur Of The Year® 2011 Florida Award winner in the Distribution and Manufacturing category. Last week, he attended the National Entrepreneur Of The Year gala in California. There, he met with former President George Bush, the 43rd President of the United States.

“I was very honored to have had the opportunity to meet President Bush and exchange ideas with some of my colleagues at the Strategic Growth Forum in Palm Springs,” said Llano. “Ernst and Young put together a fantastic event to celebrate who I feel are the backbone of America’s economy: Entrepreneurs. I’m looking forward to see what they have in store next year!”

www.buysourceone.com

Magpul Introduces MOE Scout Light Mount

Monday, November 21st, 2011

The MOE Scout Mount is designed to connect directly to the MOE Hand Guard it is basically a raised and cantilevered section of 1913 rail. It is optimized for Surefire® Scout® Lights, but works with most 1913 Picatinny mounted lights. Available in left (11 o’clock) and right (1 o’clock) models, currently only in Black.

Shipping now to Magpul dealers and distributors as well as directly from the store.

The Smock

Sunday, November 20th, 2011

Finally, the smock is beginning to gain some traction here in the US. We’ve written about them in the past, mentioning smocks from Drop Zone, the now defunct EOTAC, SOD Gear, Level Peaks, SORD as well as the upcoming Vertx smock. But, we’ve never really talked about them and explained what they are all about.

They are literally a concept unlike anything we have in the US. I’ve heard them compared to the M65 field jacket but that idea is simply uniformed. A smock isn’t just a coat.

Rather, the smock is much more than a simple jacket. In addition to use as clothing, the smock is also intended to carry much, if not all of the wearer’s fighting load. They were originally envisioned to carry several days of combat equipment including rations, ammunition, and radios.

Primarily, the smock is a European concept and in particular, used by Commonwealth nations. I got my first SAS smock in 1989 in a trade for a poncho liner during an exercise in Belgium. Its use as an issue garment has traditionally been restricted to Special Forces yet several nations have adopted it for general issue in one form or another. One example of a much watered down smock on general issue is the Canadian Army’s combat jacket. When this design was initially adopted in the 1960s it was envisioned that the Soldier would carry his ammunition and other fighting load components in the jackets pockets. What’s more, the British military now issues a Smock as a general purpose item.

There is very limited use of Smocks by US forces. During the early 1990s, an experimental clothing system called Battle Dress System (BDS) was developed by the US Army Special Operations Command. It was a layered clothing system that eventually became the Lightweight Environmental Protection sub-system of SPEAR. The outermost layer called the SOF BDU, was a solid grey combat jacket and over trouser. With its solid great color the item was rejected due to institutional prejudice. When LEP was adopted, it was without the SOF BDU.

Issue items like the SAS Smock are pretty good, but commercial interests have taken them to a whole new level. Britain’s Special Air Sea Services has been manufacturing specialized variants of the smock since the 1980s. Other companies like Canada’s Drop Zone picked up the torch in the 90s and now, commercial items are more prevalent than the issue garment.

Smocks have made a lot of sense in Northern Europe where the cold wet climate requires layering. You see, as smocks are coat-like garments they are generally worn layered over shirts. In many climates the US military finds itself in, this would be too warm as a daily wear item. What’s more, the Extreme Cold Weather Clothing System in all three of its incarnations has offered various technical shells. It seems as if the US skipped the smock altogether for a time. But, with the advent of the most modern smocks, new fabrics have been introduced into the design essentially making them softshells. Conversely, Australian Mission Pac has developed a MultiCam ripstop 100% Cotton Smock for use in warm climates.

Other interesting concepts have been developed such as the Arktis SF Sleeveless Smock which looks like a hybrid between a smock and a 5.11 shooting vest.

Oftentimes, those with no experience with smocks will criticize the design. They don’t understand that use of a fully featured smock allows the reconfiguration of the load. For example, armor can be worn under the smock. Perhaps a chest rig may be required and perhaps not, but much of the items carried on the armor or in a pack can be carried in pockets, readily available.

With even more products hitting the market soon, smocks look to be making an indelible mark on the US market and as they become more and more prevalent, we will begin to see more widespread use, including on the battlefield. Think of the smock as yet another tool in the toolbox and use accordingly. Remember, it’s a tool, not the tool, and you’ll be ok.

-Eric Graves
The Editor
SSD

The PIG MSPC from SKD Tactical

Sunday, November 20th, 2011

Coming tomorrow, exclusively from SKD Tactical, the Patrol Incident Gear MOLLE Side Plate Carrier utilizes Velcro One-wrap fabric to encapsulate any size modern side plate and soft armor backer, in a one-size-fits all solution. The plate is wrapped in the pouch like an envelope and it attaches to the platform via Tactical Tailor’s MALICE clips. Thanks to an accessory kit, the MSPC will even accommodate 6″ x 6″ plates. Made in USA by FirstSpear!

www.SKDtac.com

Fight and Flight Tactical – 4×4 Hybrid Patch Panel

Sunday, November 20th, 2011

20111119-075901.jpg

The 4×4 Hybrid Patch Panel from Fight and Flight Tactical is an interesting concept. It looks as if they’ve crossbred an admin panel and a pistol magazine shingle. As you can see, it accepts pistol magazines like a standard mag pouch, yet it has that flat design featuring PALS webbing across the front like a shingle so that it can be sandwiched between the vest and another pouch when needed. It will also fit other small items like flashlights and knives. Fight and Flight has included are low profile bungees for the mags when used that way.

However, it differs from other shingle designs. The PALS webbing along the front also features Velcro, so that ID patches can be affixed to it. Obviously, this increases the pouch’s versatility.

If you’re interested, visit www.fightandflight.com.