2018 | Soldier Systems Daily Soldier Systems Daily

Archive for 2018

Reebok Expands Sublite Cushion Tactical Series with New Safety Toe Styles for 2019

Monday, December 3rd, 2018

St. Louis, MO (Dec 3, 2018) – Warson Brands, official licensee of Reebok for duty and uniform footwear, announces two new additions to its popular Reebok Sublite Cushion Tactical series of footwear for law enforcement and military professionals.

The new RB8809 builds upon the success of the Reebok Sublite Cushion Tactical series by offering a coyote brown version with composite safety toe and side zipper for wear with the new Air Force uniform. “With the Air Force transitioning to the OCP uniform, we wanted to make sure they had the option of wearing a composite toe and side zip version of our most popular military boot,” said John Duvic, VP of Product Development at Warson Brands.

Also new for 2019 is the addition of the RB8606, a 6-inch version of the Sublite Cushion Tactical featuring a composite safety toe and side zipper. “Because it is so lightweight, our Sublite Cushion Tactical boots have been popular among law enforcement professionals, and we had several requests for a safety toe version with a side zipper. The composite toe is still very lightweight, but adds a lot of protection,” says Duvic.

The RB8809 and RB8606 will be available for purchase at an MSRP of $150.00 and $160.00, respectively. Reebok Duty will display the full line of Sublite Cushion Tactical boots at SHOT Show booth #10179.

Reebok duty footwear and the Sublite Cushion Tactical series are available through select retailers throughout the United States. For more information on the Reebok Sublite Cushion Tactical, visit reebokwork.com/sublite-tactical.

Tags: Reebok, Warson Brands
Posted in Advertiser, Boots, Press Release | Comments Off on Reebok Expands Sublite Cushion Tactical Series with New Safety Toe Styles for 2019

ITS Releases Smaller and More Durable EDC Trauma Kit

Monday, December 3rd, 2018

9797F2FF-9DF0-45AC-A7A8-043DEE8A8CCC

[ARLINGTON, TX, 12/3/2018] Imminent Threat Solutions has made the EDC Trauma Kit™ even smaller! Utilizing the TruFlex™ material found in the Boo-Boo First Aid Kit™ and the ETA Trauma Kit™, they’ve reduced the overall footprint. This durable material is more puncture resistant than other vacuum material on the market, which allowed ITS to eliminate the protective outer sleeve from the previous version of the EDC Trauma Kit™.

E8E0E238-90B1-4519-81E4-FC46350F1131

Featuring a full-size tourniquet, the EDC Trauma Kit™ is designed with a minimum footprint, while still being fully capable of preventing the number one CoTCCC preventable cause of death; extremity hemorrhage. (AKA Bleeding Out) At around the size of an average wallet, the EDC Trauma Kit™ fits perfectly in your back or side pocket and weighs only 7 ounces!

8AB4B2AD-B183-4260-85EB-D14D8965FFF1

Imminent Threat Solutions provides indispensable skill-sets and products to explore your world and prevail against all threats.

For more information on ITS Medical products, please visit store.itstactical.com/collections/medical.

Tags: ITS Tactical
Posted in EDC, Medical, Press Release | 3 Comments »

UNITY Tactical Announces MARK & SARA Upgrade

Monday, December 3rd, 2018

3654F0FA-40FF-4968-9387-A054300A5B50

In an effort to continually improve our products, we have upgraded all wire forms in the MARK (Modular Attach Rail Kit) to a standard length with swaged tips. This means that MARK wire forms will allow more vertical adjustment and will be 100% drop-in compatible with 3M Peltor products out of the box. The new swaged tips are also 100% compatible with our SARA (Sordin Arc Rail Adapter) systems for use on MSA/Sordin-based headsets.

F154215A-9D97-4168-A646-CF3E3023F968

The MARK is the most complete system for direct mounting communication headsets and electronic ear protection to modern helmets. It is the smallest, lightest, and lowest profile attachment method for most popular headset systems used by professionals on the modern battlefield, including 3M Peltor, MSA, Sordin, Safaraliand TCI, TEA, and many more. Kits are available to interface with Genuine Ops-Core ARC, Crye Precision ARC, Revision, Team Wendy, and MTEK MLOK rail platforms. The wire forms of the MARK system are designed to put more inward pressure on the ear cups to improbe the seal. This can provide better hearing protection, electronic communication transmission, and overall fit of the helmet. The small hub leaves more helmet rail estate open for attaching other mission critical gear like lights, illuminators, cameras, etc.

MARK and SARA and built in the USA.

MARK Systems are available at www.unitytactical.com/shop/mark-kit.

SARA Systems are available at www.unitytactical.com/shop/sara-sordin-adapters.

Retrofit MARK wires for previously-purchased MARKs are available at www.unitytactical.com/shop/mark-wire-forms.

Tags: Unity Tactical
Posted in Advertiser, Helmets, Press Release | Comments Off on UNITY Tactical Announces MARK & SARA Upgrade

Strike Industries – Safety Selector Switch Stickers

Monday, December 3rd, 2018

Add some flare to your Mil-Spec AR-15 with the new Strike Industries Safety Selector Switch Stickers! Instead of the boring old “SAFE” and “FIRE”, try “spicing” up your range time with one of our several stickers! Sure, switching from SAFE” to “FIRE” is satisfying, but switching from “NO PEW” to “PEW” really gets the adrenaline pumping.

Strike Industries Selector Stickers is a great alternative to paying for custom engraving on your lower receivers. Price: $7.95.

www.strikeindustries.com/shop/si-ar-lrss

Posted in Weapon Accessories | 4 Comments »

Reptilia Introduces CQG Pistol Grip for AR15-style Firearms

Monday, December 3rd, 2018

Reptilia’s latest product is the CQG Pistol Grip. Its smaller design was inspired by the old Colt 607 and is a great fit for the increasingly popular compact sized short-barreled rifles, AR15 pistols, and pistol caliber carbines.

Featuring a more pronounced vertical grip angle, anti-slip front and rear texture, and an enhanced beaver tail design; the CQG encourages the shooter’s hand to be positioned higher on the grip, for greater control and improved comfort.

The CQG is designed for a wide range of hand sizes and weapon configurations. Molded from high-strength reinforced polymer, the CQG is compatible with AR15/M16, AR10/SR25, and SIG MPX/MCX platforms that features a full lifetime warranty against manufacturer defects – buy with confidence. Made in USA.

NSN: 1015-01-674-6753

reptiliacorp.com/collections/frontpage

Posted in Weapon Accessories | 1 Comment »

Nomad Defense Co. – Nomad 9 Frame

Monday, December 3rd, 2018

Nomad Defense Co.’s Nomad 9 is a stripped pistol frame that is compatible with Gen4 G19 components. Built with improved ergonomics over the stock Glock frame, the Nomad 9 features an extended beavertail; a contoured grip with no finger grooves; a raised trigger guard to allow for a higher grip, which is also enlarged for better use with gloves; and a forward thumb ledge, similar to the ‘gas pedal’ found on many modern competition pistols. The Nomad 9 also features a factory ‘rock grip’ texture, a MIL-STD 1913 spec accessory rail, flared magwell, and three interchangeable backstrap sizes.

Because of design changes when compared to a Glock-spec frame, the Nomad 9 is not guaranteed to be compatible with many G19-compatible holsters, however Nomad Defense is working with several holster makers to develop holsters for the Nomad 9.

For more information, and to find out where to buy, visit www.nomaddefenseco.com

Tags: Nomad Defense Co.
Posted in weapons | 1 Comment »

PEO Soldier Surveys Textile Industry for Army Green Service Uniform Manufacturers

Monday, December 3rd, 2018

Last week, Program Executive Office Soldier, Ft. Belvoir, VA issued a market investigation to identify domestic manufacturers as sources of the complete Army Green Service Uniform (AGSU).

The US Army announced adoption of the new dress uniform on Veteran’s Day. According to the announcement, the AGSU is part of an effort to help form a stronger connection between the Army and the country. The uniform invokes an image of our Army at its most popular and connects that heritage to today’s Soldier. Adopting the AGSU will enable the Army to re-establish a distinctive look, renew a strong uniform tradition in the Army and distinguish our Soldiers from the other services.

An complete AGSU includes dress coat, two pairs of pants, long sleeve shirt, short sleeve shirt, one tie, one pair leather oxfords, two pairs of socks, garrison cap, belt with buckle and all-weather coat.

This survey does not include optional items such as the service cap, Ike jacket, windbreaker, leather flight jacket or jump boots.

In addition to information on potential offerers’ manufacturing capabilities including equipment, facilities, and quality management systems, PEO Soldier wants to know if the could deliver the following quantities to the Government:

– Provide product demonstration models for the AGSU ensembles (including accessories) within 90 days of contract award?

– Provide 6,000 complete AGSU ensembles (including accessories) within 275 days of contract award?

– Provide up to 150,000 complete AGSU ensembles (including accessories) within 19 months of contract award?

– Offer subcontracts for like items to current manufacturers of Army Blue Service Uniform, supplying them fabrics, in lieu of GFM and meet the financial obligations required to do so?

– Make, stock, maintain and ship on order an tariff/inventory of 1,000 (minimum) and 50,000 (maximum) complete AGSU uniform ensembles for up to 36 months after contract award?

– Provide Special Fielding services for up to 5,000 uniform ensembles. Services may include off site sizing, alterations, make-to-fit, expedited production, expedited delivery, and full set up of uniforms.

Naturally, this requires domestic sourcing and all materials and work must be Berry compliant. Responses are due Dec 14, 2018 11:59 pm Eastern. For full details, visit www.fbo.gov.