FirstSpear TV

Archive for 2018

James Malarkey No Longer CEO of X Products

Monday, February 26th, 2018

82627A66-F1A5-45DB-8E80-3E1C4E93104B

PRESS RELEASE

Feb 22 2018

Effective Immediately James Malarkey has been removed as CEO of X Products

Since inception X Products has been a strong advocate of 2A rights and Does Not support Mr Malarkey’s statements or any position that would suggest gun ownership is anything other than a right protected under the 2nd Amendment.

Mr Malarkey has been replaced as CEO by Dewey Akers, as acting CEO, effective immediately. Please refer all references for response to Mr Akers.

It is with sincere apology that X Products Senior Management finds it necessary to defend its position as a STRONG supporter of 2A Gun Rights.

The Senior Management has found it necessary to respond to this with our community of followers in a manner that removes any association with Mr Malarkey’s comments.

Mr Malarkey, or his comments, DO NOT reflect the position of X Products, its staff,or Industry Partners.

We have taken steps to insure we regain the respect of an industry that has been a support and source of growth for X Products and its staff.

I want to Thank you for understanding, this process has been difficult to execute and hope you will contact me personally with any questions about our transition.

Dewey Akers

CEO

Email: dewey@xproducts.com

Office: 928.852.0078

MATBOCK MONDAY || Backdraft

Monday, February 26th, 2018

85464349-99FB-4FE2-834E-706EE1CF1567

The MATBOCK Backdraft Medical Kit was designed for smaller units with pretty quick access to next level care.  Instead of carrying an entire med bag, the medic or corpsman can now have a more streamlines system.  The Backdraft mounts on the back of the plate carrier via MATBOCK’s Tabs and contains two separate pouches, one for airway and one for bleeding.  The bags are held in place via adjustable amounts of velcro and they have lanyards that secure near the side plates on the carrier. 

When one pouch is needed, the operator can simply select the correct lanyard and pull.  From recent combat action in Afghanistan, one medic had the following to say, “It’s an awesome system and perfect for the mission set we’re doing, much more comfortable and streamlined than a traditional aid bag.”  The system is made from MATBOCK’s Ghost and Ghost Lite materials making the bags lightweight and water resistant to protect your medical kit.

F444FA4C-F136-4E45-B9B8-E7F881B2DB65

www.matbock.com/collections/pouches/products/backdraft-medical

DroneShield Welcomes the Turnbull / Pyne Defence Export Strategy

Monday, February 26th, 2018

26 February 2018, Sydney Australia

DroneShield Welcomes the Turnbull / Pyne Defence Export Strategy

• The Strategy is a considered and practical roadmap.

? “Whole of government” approach.

? Funding assistance for industry.

? Focus on leveling the global playing field for Australian SMEs.

• Top-ten global Defence exporter status, and the other objectives of the Strategy, are achievable for Australia.

• As a result of the Strategy, DroneShield is viewing favourably the option of large-scale manufacture of its products in Australia.

• The Strategy did not appear to receive appropriate levels of media attention but it is a major step for Australia.

• The Government got this policy initiative right.

On 29 January 2018, The Hon Christopher Pyne MP, Australian Minister for Defence Industry, announced the new Defence Export Strategy (the Strategy) of the Turnbull Government.

The Australian developer and manufacturer of cutting-edge high technology counter-drone products DroneShield Ltd (DroneShield or the Company) has now had an opportunity to review and consider the extensive Strategy in detail.

DroneShield’s Statement on The Defence Export Strategy

As an active participant in the Australian Defence export industry, DroneShield welcomes the Strategy. DroneShield’s analysis is that the Strategy is not an aspirational theoretical policy, but rather is a carefully thought-through and practical roadmap to attaining ambitious but perfectly achievable goals that will benefit Australia.

Oleg Vornik, DroneShield’s Chief Executive Officer, said “We are heartened by the considered and focused approach of the Turnbull Government and Minister Pyne to maximising the economic and social benefits of Australia’s growing Defence export industry, for Australia. The Defence export industry contributes $1.5 billion to $2.5 billion a year to Australia’s economy today but it lags compared to its counterparts in other major economies. The Government has recognised that, with some help from the Government, this status quo can be disrupted. The Australian economy and standing in the world will benefit substantially from this disruption. We believe that the Government has come up with a set of measures that will quickly produce tangible results.”

Image: DroneGun Tactical

The Strategy focuses on several key objectives:

• job creation in, and economic prosperity for, Australia;

• growing Australia’s Defence industry domestic capability in order for Australia to become a top ten global Defence exporter;

• achieving broader international engagement by Australia;

• maintaining the Australian Defence Force edge; and

• enabling greater innovation and productivity.

“Whole of Government” Approach

Since late 2017, DroneShield has been a member of Team Defence Australia, a join initiative with Austrade and the Department of Defence. Participation in Team Defence Australia, which lends the weight and credibility of Australian governmental assistance to a small company like DroneShield, has been invaluable for the Company. This new Government Strategy takes this collaborative approach much further, as it employs a “whole of government” approach whereby the government has established the Australian Defence Export Office and the office of the Australian Defence Export Advocate. This is an efficient approach, which will focus the governmental assistance available to Australian defence exporters on areas that will likely make a substantial difference:

• providing local Defence industry experts who are able to provide exporters with advice and support in foreign markets;

• interfacing industry with Australian Defence Attaches;

• sharing Defence industry intelligence with a broad range of industry stakeholders; and

• supporting exporters with trade missions.

Funding Assistance to Industry

To date, DroneShield has been able to develop and commence the sales of its high-tech products with the most minimal financial assistance from the government. But governmental procurement processes around the world are long, and there exists a time gap between development and broad adoption of cutting-edge technologies by governmental end-users. The Strategy’s focus on the Centre for Defence Industry Capability (CDIC) recognises the reality of Australian and global Defence procurement, and the critical importance of governmental grants in developing “bleeding-edge” Defence technologies and bridging this gap.

DroneShield, like most Australian Defence exporters, is generally necessarily smaller than its foreign competitors. The integration of the Export Finance and Insurance Corporation (EFIC) into the Strategy will enable Australian Defence exporters to accommodate large orders for which they would not have otherwise had working capital. Further, the ability of EFIC to provide Defence export finance will provide comfort to foreign governmental customers that Australian Defence exporters, albeit smaller than their foreign competitors, can deliver.

Image: DroneSentry

Focus on Levelling the Global Playing Field for Australian SMEs

In addition to the use of EFIC, the Strategy specifically singles out Australian small and medium sized enterprises for support, in order to help them compete internationally.

Importantly, the Strategy expressly focuses on helping Australian small and medium sized enterprises access the supply chains of the global primes (the largest global Defence companies). The primes hold a substantial amount of negotiating and purchasing power in dealings with Australian SMEs. However, the primes are also dependent on the Australian Government, a major customer for many of them, for orders. The Government’s willingness to throw its weight behind smaller Aussie companies is a testament to its understanding of the market, and its willingness to use its reputational capital to help small Australian businesses who would otherwise have been disadvantaged due to their size.

The Strategy is Already Making a Difference

Peter James, DroneShield’s Chairman, commented, “The Strategy commits public resources and efforts to an area where they are likely to be most effective. These resources will provide the public with a multiplier effect in employment, domestic manufacturing, cash in-flows for the economy, innovation, and our domestic ability to defend Australia without relying on others. The Strategy does not appear to have received appropriate levels of media attention. However, it is a major economic, productivity and Defence step for Australia. We have spent the recent weeks considering the Strategy and its effect and are convinced that the Government got it right.

With the initial orders for DroneShield’s cutting-edge anti-drone products DroneGun, DroneSentinel and DroneSentry now coming in, DroneShield is in the process of determining the most effective location for larger-scale manufacture for its products. We have a wide range of options on the table, including the United States and Asia, some seemingly more cost-effective than the option of manufacturing our products in Australia would provide. The Strategy gives us the comfort that if we were to bring the manufacture of our products and the associated employment to Australia, we will be making the right decision.”

As Seen On /K

Sunday, February 25th, 2018

Discuss amongst yourselves.

Field Gourmet – MRE Pizza Available Now

Sunday, February 25th, 2018

For years, food technologists have worked to develop a shelf-stable pizza. The problem has been the different components working against one another to keep everything feeling and tasting fresh.

But now, Bridgford Ready to Eat sandwiches offers a shelf stable Pepperoni Pizza.

Get your individual servings at www.mealkitsupply.com/MRE/US/product/pepperoni-pizza-cheese-sauce.

82nd Airborne Division tests new wheeled cargo delivery system to support Global Response Force

Sunday, February 25th, 2018

FORT BRAGG, North Carolina — 82nd Airborne Division troopers here are wrapping up testing of the Caster Assisted A-Series Delivery System (CAADS), which involves delivering mission essential supplies and munitions to ground troops.

Soldiers from Company A, 2nd Battalion, 325th Airborne Infantry Regiment, 2nd Brigade Combat Team teamed up with subject matter experts from the United States Army Advanced Airborne School (USAAS).

FA60888B-D562-4DB5-9F8B-CFBBC574B64C
Paratroopers from the U.S. Army Advanced Airborne School develop Techniques Tactic and Procedures prior to testing with the U.S. Army Operational Test Command’s Airborne and Special Operations Test Directorate. (Photo Credit: Mr. Michael A. Zigmond, Airborne and Special Operations Test Directorate, U.S. Army Operational Test Command Public Affairs.)

With the Fort Bragg-based U.S. Army Operational Test Command’s (USAOTC) Airborne and Special Operations Test Directorate (ABNSOTD), they successfully rigged, dropped, and recovered the CAADS door bundles during operational testing on Sicily Drop Zone.

The 82nd Airborne Division is part of the XVIII Airborne Corps, and is the Army’s most strategically mobile division.

5EDDC699-D80E-4DB3-AF4A-43A7B8BC202F
Capt. Matthew P. Carstensen, (right) Commander, Headquarters & Headquarters Co. 2nd Battalion, 505th Parachute Infantry Regiment, 3rd Brigade Combat Team, conducts a door check prior to exiting the first Caster Assisted A-Series Delivery System from a U.S. Air Force C-17 aircraft. (Photo Credit: Mr. Michael A. Zigmond, Airborne and Special Operations Test Directorate, U.S. Army Operational Test Command Public Affairs.)

82nd Airborne Division Commander, Maj. Gen. Erik Kurilla, said, “The 82nd Airborne Division is the elite Airborne infantry division of the United States Army, specializing in parachute assault operations into denied areas.”

Kurilla wants to be able to deploy three CAADS door bundles per paratroop door. Bundles can weigh up to 500 pounds of cargo and be airdropped from a variety of Department of Defense (DoD) transport aircraft to support the Global Response Force.

CD054ADB-0438-43DD-811E-74C778C54052
Sgt. 1st Class Miguel A. Amadis of Company A, 2nd Battalion, 325th Airborne Infantry Regiment, 2nd Brigade Combat Team, positions the Caster Assisted A-Series Delivery System in the door of a U.S. Air Force C-17 aircraft before deployment onto Sicily Drop Zone. (Photo Credit: Mr. Michael A. Zigmond, Airborne and Special Operations Test Directorate, U.S. Army Operational Test Command Public Affairs.)

The current door bundle limit without CAADS is two bundles per door per pass.

Currently, there is no standardized aerial delivery system in the Department of Defense (DoD) inventory that employs the dolly-assisted method, but other countries like France employ a similar system.

CAADS is a platform built of plywood, a brake, and six caster wheels which allow the door bundle to roll across the aircraft floor, speeding airdrop deployment.

Testing demonstrated safe deployment of door bundles using CAADS to improve the ability of Soldiers deploying the bundles while reducing exit time. The increased speed allows for additional bundles per pass.

The efficiency of the CAADS concept provides the capability of exiting more door bundles per pass, per aircraft — all increasing the amount of supplies on the ground to the paratroopers during their critical 12 hour initial entry phase.

Sgt. 1st Class Miguel A. Amadis of Company A, 2nd Battalion, 325th Airborne Infantry Regiment, 2nd Brigade Combat Team said, “I like the CAADS a lot. It was easy to push, easy to set up at the door, and it will be very useful for the upcoming missions.”

One Airborne unit commander said he liked CAADS’ simplistic design and concept, which can seriously lessen the physical wear and tear on the average paratrooper.

“The castor’s one free axle made the rotation into the door easy, but still kept two axles locked, which maintained control as the container exited the door and entered the slip stream,” said Capt. Matthew P. Carstensen, Commander, Headquarters and Headquarters Company, 2nd Battalion, 505th Parachute Infantry Regiment, 3rd Brigade Combat Team.

“I felt that the concern of jarring the container in the doorway was safely mitigated by those locked axles,” he added. “Looking at future application, a container of this size and capacity can significantly increase the combat power and lethality delivered onto a hostile drop zone on the first pass.”

According to Sgt. 1st Class Martin L. Ross, ABNSOTD Test NCO, operational testing is OTC’s opportunity to contribute to Army readiness.

“Anything less compromises the Army’s ability to provide the forces that fight and win the Nation’s wars,” he said.

“Operational testing is about Soldiers,” said Col. Bradley F. Mock, Director of the ABNSOTD. “It is about making sure that the systems developed are effective in a Soldier’s hands and suitable for the environments in which Soldiers train and fight. Operational testing is OTCs opportunity to contribute to readiness; anything less compromises the Army’s ability to provide the forces that fight and win the Nation’s wars.”

The ABNSOTD Test Division chief explained how test units incorporate systems under test into their actual missions and training requirements.

“Leaders of units involved in testing have the first look at new systems, which may also drive changes to operations and doctrine,” said Lt. Col. Gregory Oquendo. “Tests are unit-led, which translates into coordinated control under realistic operational environment scenarios.”

Other tests underway at ABNSOTD include the Advanced Medium Mobile Power Sources (AMMPS) 30K generator which will replace the relatively short-lived TQG (Tactical Quiet Generator) program and airdrop certification of the Light Armored Vehicle (LAV-25A2) Mobile Protective Firepower (MPF). Highly-instrumented test drops by Airborne and Special Operations Test Directorate (ABNSOTD) will help test overall airdrop survivability of the vehicles.

By Mr. James (J.C.) Cochran, Military Test Plans Analyst, Airborne and Special Operations Test Directorate, U.S. Army Operational Test Command Public Affairs.

MasterPiece Arms Introduces the MPA Micro Urban Tactical (MUT) Rifle

Sunday, February 25th, 2018

Designed for use when an ultra-compact platform with a minimal stored footprint is required.

MPA-MUTMPA MUT Standard Rifle

Comer, Ga. (February 2018) – MasterPiece Arms (MPA), manufacturers of the MPA BA Rifles and Chassis Systems, is pleased to introduce the MPA Micro Urban Tactical (MUT) 308BA Rifle. This purpose driven rifle was designed to be used when an ultra-compact platform with a minimal stored footprint is required, all while achieving sub ½ MOA accuracy. Watch the video below:


Masterpiece Arms MPA MUT Rifle

The MPA Light Weight Chassis System is machined on MPA’s CNC Horizontal Machining Centers to exacting tolerances from 6061 aluminum. The v-bedding system provides additional clearance for glass bedding action and straight section of the barrel. The chassis also includes a built-in inclinometer, thumb notch, lower mounted Picatinny Rail and is spigot mount ready. The spigot mount is designed to be inserted in the front of the chassis to provide an extended distance between the front bipod and the rear support. A sling stud can replace the Picatinny rail if the customer desires.

MPA-CSR-Buttstock-a

The specially designed folding Compact Suppressor Ready (CSR) Buttstock comes with an adjustable length of pull and can store a suppressor up to 1.5″ in diameter (1.570″) and 8.5″ in length. This can take a suppressed rifle measuring up to 48″ in length and reduce the overall length to 23.5″ with the suppressor stored in the buttsock and folded/locked into a short barreled rifle (SBR) configuration.

The MPA MUT 308BA Rifle includes a precision gun drilled, reamed and honed Spencer / MPA rifle barrel made from 416RQ stainless steel. The hand lapped barrel is bore and land inspected on a video borescope. The chamber is indicated within 0.0001″ or less to the bore of the rifle. The Spiral Fluted One Piece Bolt with DLC coating is hand lapped and fitted to each individual action. The rifle is available as an SBR with a barrel length of 12.75″ or as a standard rifle with a barrel length of 16″ or longer.

MPA-MUT-Rifle-SBRMPA MUT SBR

MPA MUT 308BA Rifle Specifications:

Caliber: 308 Winchester (other calibers available)
Action: Curtis Custom Axiom Action
Action / Bolt Design: Remington® 700 Type
Bolt: Spiral Fluted One-Piece Bolt with DLC Coating
Chassis: MPA BA Lite Chassis with CSR Buttstock
Chassis Weight: 3.2 lbs.
Rifle Weight: Varies, 8.6 lbs.
Barrel: 416RQ Stainless Steel Spencer / MPA hand lapped barrel
Barrel Twist: 1:10 or 1:8
Barrel Length:12.75″, 16″ or customer supplied
Barrel Muzzle Thread: 5/8-24 TPI
Barrel Profile: #5
Coating: Cerakote®
Length of Pull: 13.5 – 15″
Trigger: Trigger Tech
Trigger Pull: 1 – 3 lbs. (customer choice)
Magazine: AICS Mag Compatible (Five round Accurate/AICS Type magazine included)
MSRP: $3,025.00

The MPA MUT 308BA Rifle is available in the following colors: black, burnt bronze, flat dark earth, gunmetal, marine red, NRA blue, sniper green and tungsten. All chassis are Cerakoted in a multitude of colors. Solid colors are included. Custom Cerakote colors have a $135 upcharge for the chassis body and $65 for the barreled action.

MPA makes every effort to get the product to the customer as quickly as possible. Please allow six to 10 weeks before delivery from date of order as these are hand-built precision instruments and not production components.

For more information on MasterPiece Arms and their product line of rifles, chassis systems and accessories, visit www.masterpiecearms.com.

Gunfighter Moment – John “Chappy” Chapman

Saturday, February 24th, 2018

You do you

We’ve all seen the endless talk on social media this week about the issues spinning off the cowardly scumbag’s rampage in Florida. We seem to be spending a lot of time yelling at people who agree with us, on everything from gun control, mental heath and anti-depressants, Trump’s waffling on the 2nd Amendment, to former Deputy Scot Peterson’s refusal to close with and destroy the enemy. While the vomiting of emotion is certainly understandable, especially given that our culture now seems to encourage our belief that others should care what we think, it doesn’t accomplish a damn thing.

The only thing you can control is you. The way we solve this problem, other than letting it burn itself out or waiting for the next big problem to divert our controversy-addicted brains, is for each of us to get our own house in order. I’d suggest, as a starting point, taking two simple steps: get your mind right, and improve your skills.

These are two steps you can take right now, today, that you have complete control over. Not only that, but these are the two areas that directly effect your ability to protect yourself and / or fulfill your oath, and no one else can do them for you.

If you’re not already doing so, take some of that social media time and invest it in dry fire, flow drills, range or shoothouse time, or talking to your wife about what to do if you’re killed. Maybe a little time understanding your own weaknesses, whether physical, mental or emotional, and dealing with them head on, would be in order.

Let the politicians argue, the internet trolls participate in meme on meme violence, and the weak complain that others should be “doing something”. Now is not the time for weakness or navel-gazing. Now is the time to get ready for your turn at bat.

You’re the only one in control of you, so focus on that. We may all be counting on you some day.

Stout Hearts

Chappy

John Chapman is a founding partner of Forge Tactical, a full service training firm that focuses on procedural training for law enforcement and responsibly armed citizens. An instructor at EAG Tactical under the mentorship of BCM Gunfighter Pat Rogers for many years, John has been teaching firearms and tactics since 1994.

In the past, John has worked as a private security contractor, servicing training and physical security contracts in the public and private sector, both domestically and internationally. Mr Chapman is also a former police Lieutenant, and a currently serves as a team leader on a SWAT team in the Midwest.

Gunfighter Moment is a feature brought to you by Bravo Company USA. Bravo Company is home of the Gunfighters, and they bring us a different trainer to offer some words of wisdom.