TYR Tactical

Archive for 2019

Training the Trainers: Preparing to Launch the New Army Combat Fitness Test

Saturday, September 14th, 2019

WASHINGTON — The Army is built upon the individual Soldier, and the battlefield of the future demands Soldiers who can excel under intense physical and cognitive demands. The new Army Combat Fitness Test breaks with over three decades of the Army Physical Fitness Test. The Army plans to roll out the test by October 2019 and replace the APFT as the Army’s fitness test of record by October 2020.

To succeed, the Army must address new training, evaluation, and equipment requirements. The Army is taking an innovative approach to implementing the ACFT by utilizing field tests, practice ACFTs, and qualifying all noncommissioned officers and officers as graders.

WHAT’S NEW?

As stated by Maj. Gen. Malcom Frost in 2018, the new test yields three key advantages:

– It measures strength and conditioning that accurately mimics the movements necessary on the battlefield.

– It is gender and age neutral with standards corresponding to the demands of the Soldier’s duty.

– The test itself promotes an Army-wide culture of physical fitness.

Instead of training to pass an arbitrary strength standard of push-ups and sit-ups, Soldiers must maintain a healthy lifestyle and train for overall strength and conditioning. Research shows this will decrease injuries, which will increase the number of deployable Soldiers. The Australian army instituted similar training in 2016 and decreased their trainee injury rate by 40 percent. The money saved in decreased injury rates and the increase in deployable Soldiers is worth the cost of purchasing the required equipment.

In April 2019, the ACFT Mobile Training Team held an ACFT demonstration for more than 100 Army inspectors general at the World Wide Inspector General Conference. During this demonstration, Col. Ray Herrerra, command inspector for U.S. Army South said, “After taking the test, I believe the ACFT is a substantial improvement toward determining readiness, and it better prepares Soldiers than our current annual test.”

ACFT MILITARY TRAINING TEAMS

In order to implement the ACFT properly, the Army is training a core group of trainers to prepare their own units and administer the test. The MTTs prepare and certify new Army Master Fitness instructors and mid-level supervisors to train Soldiers to administer the ACFT. This approach trains the trainers without negatively impacting active duty readiness, and integrates the new test regime at maximum efficiency before it is officially implemented across the force.

In July 2018, the Army published Executive Order 219-18: The Implementation of the Army Combat Fitness Test, which officially established 30 Active Duty, 10 USAR (Reserve), and 10 ARNG (National Guard) NCOs/officers to serve on the ACFT MTTs across the force.

In May 2019, as part of the Association of the U.S. Army National Security Studies team, Maj. Joseph Flores and Master Sgt. Shelly Horner (ACFT MTT team leads) were interviewed about the Army’s effort to train the trainers and the requirements involved in the certification process. According to Flores and Horner, the MTTs are responsible for training three levels of graders, Levels I-III, each with its own distinct knowledge, skills, and abilities.

LEVEL I — ACFT GRADER

The ACFT Grader will complete a one-day validation training offered by a locally-sourced ACFT Level II or Level III Grader-Instructor.

ACFT Level I Grader has the knowledge, skills, and ability to:

• Validate a testing location

• Validate the testing equipment to standard

• Grade the 6 ACFT test events to standard

• ACFT Level I Grader may be used to familiarize their unit with the ACFT and prepare Soldiers to take the test and/or receive training from Level II Graders.

LEVEL II — ACFT GRADER

The ACFT Level II Grader will complete the two-day validation training offered by the U.S. Army Physical Fitness School or U.S. Army Center for Initial Military Training. Or by a locally-sourced ACFT Level III Grader-Instructor. The ACFT Level II Grader may not train/validate other Level II Graders.

ACFT Level II Grader has the KSA to:

• Serve as a testing officer in charge/ noncomissioned officer in charge to administer a unit ACFT

• Validate a testing location

• Validate the testing equipment to standard

• Grade the six ACFT test events to standard

• Administer a 90-day record ACFT

• Train ACFT Level I Grader by providing the three-hour validation

LEVEL III — ACFT (MASTER FITNESS TRAINER PERSONNEL)

The ACFT Level III Grader-Instructor must hold the Master Fitness Trainer certification and will complete the three-day validation training offered by the MTT or U.S. Army CIMT.

ACFT Level III Grader-Instructor has the KSA to:

• Serve as a testing OIC/NCOIC to administer a unit ACFT

• Validate a testing location

• Validate the testing equipment to standard

• Grade the six ACFT test events to standard

• Administer a 90-day record ACFT

• Train ACFT Grader (Level I) by providing the three-hour certification course.

• Train ACFT Master Grader (Level II) by providing the two-day certification training.

Currently, more than 6,000 Soldiers have received formal ACFT Level II-III Grader Validation training from one of the ACFT teams. Since Level II and III graders are allowed to train others at a lower level, it’s hard to document how many other graders have been trained to the Level I standard. The Army’s plan is that all NCOs and officers receive an ACFT Grader Level Validation before implementation of the ACFT.

PREPARATION

The Army Combat Fitness Test Training Guide has multiple examples of the movements and exercises involved in the ACFT and has equipment substitutions (like an ammo can, water can, or sandbag in place of kettlebells or medicine balls) for those deployed or without access to the ACFT lane equipment. For additional information on exercises and movements, consult the Army doctrine on exercise: FM 7-22: Army Physical Readiness Training.

For injured Soldiers, and those on permanent profile, the U.S. Army CIMT is developing alternate events, to be officially approved on Oct. 1, 2019. These events may include the stationary bike, swimming events, or rowing.

For more information on the ACFT, go to the official Army website: www.army.mil/acft. It includes instructions, photos, and videos for each of the events. It also contains instructions, photos, and videos for three different preparatory exercises per event to help Soldiers train for the October 2020 implementation date.

*If NCOs and officers are interested in obtaining their ACFT certification from one of the MTTs, they can contact their unit’s first sergeant.

By Maj. Bradley Cooper & Jeremiah Rozman

Robert Winner, USAF (Ret) – Zilis-Sacred Mountain Retreat Center AAR

Saturday, September 14th, 2019

Sometimes you don’t know what you need until it’s presented to you…
Robert Winner, USAF (Ret)

Back in June I was invited to spend time with fellow Military, Veterans and First Responders at the Zilis-Sacred Mountain Retreat Center (Z-SMRC) in Deadwood South Dakota. I can honestly say this proved to be one of the most rewarding experiences of my life. 

1

For years I’ve had a really good handle on my demons, both the good and bad ones. Enough so that others sought out my counsel in dealing with their own chaos.  Well, this weekend at Z-SMRC was a pinnacle moment for me. 

2

I spent time with, shared stories, laughed and cried with x8 amazing heroes.  I watched strangers from different backgrounds with different stories and different scars come together to become friends and inevitably become a new family.  Over the course of the retreat: Combat Vets laughed and cried about the excitement and chaos or war, LEOs laughed and cried about the dregs of society and EMS personnel laughed and cried about the whims of fate and the evil of the human spirit.  Our group of x4 women and x4 men included: retired Dallas cop, retired USAF cop, an Army Trauma Nurse, an Army Infantryman, an Army Engineer, EMTs and a Fire Fighter/ Paramedic. We had a broad spectrum in our class which although from different paths had very similar scars of service.

3

The weight of the world is that of demons left unchecked and unsupervised.  Through our peer-to-peer support and teamwork everyone walked away a week later stronger and wiser and more capable of quelling the noise.

There are good and bad to every story, but this story ends with strangers building bonds that transcend friendship and created a lasting family.  Different clans coming together as one tribe, a tribe of amazing people who believe in a higher calling, service before self and a dedication to this country that runs deeper than blood.

4

Enough good cannot be said for the amazing work that Jerrid Geving and Emily Kruger have done in putting together the Zilis-Sacred Mountain Retreat Center and this program. 
Hands on work to build up a team, Equine therapy because horses heal souls, blacksmithing knives from RR nails, Leather working to make sheaths, Yoga, group trips, etc. 

The ebb and flow of the Z-SMRC was spot on perfect and the cast/ crew was amazing. We had some pretty great folks pass through while we were on deck, fellow graduates of the program, supporters who brought their craft and trade with them for us to experience and a Gold Star family stopping by to say hello.

5

To be honest I feel humbled and honored to have been a part of it.  The transformation of folks involved was truly phenomenal.  In a case or two we literally helped each other snatch a soul back from the edge.

I’ll be returning to the Black Hills to help as often as I’m invited because I believe in their mission and goals 110%.  The beauty of the Zilis-Sacred Mountain Retreat Center is that it is a No Cost program for the attendees.  Airfare (or gas reimbursement), lodging, food, activities… all covered by the Z-SMRC program.

Not all wounds can be healed, not all the screams can be silenced and yet it is the helping hands of family, friends and strangers that help guide the path forward through the darkness of uncertainty.  Not all demons can be snuffed out but it is possible to control the demons and turn down the volume on the chaos. Contact the Zilis-Sacred Mountain Retreat Center if you, a loved one or a coworker/ friend are in need of these services.

If you have questions or wish to recommend someone to attend the program, please reach out to Emily: SACREDMTN18@GMAIL.COM or Rob: ROBERT.WINNER.ZSMRC@GMAIL.COM

Savage Arms Tests a 200-Year-Old Question: Can One Gun Do It All?

Saturday, September 14th, 2019

WESTFIELD, Massachusetts –  By sending a single rifle around the country, hunting different animals with different hunters, Savage Arms hopes to answer a question that’s stirred debate in hunting camps and gun clubs for decades: If you could own just one gun, what would it be?

Savage hopes the answer is its “AccuFit” stocked version of its venerable Model 110, and that proof of its versatility is revealed in the “Traveling AccuFit” campaign that starts this fall. You can follow along as the rifle makes stops from Texas to Wyoming and Montana to South Carolina. Follow our story at www.savagearms.com/fitforall.

While Savage Arms does not believe that there is a single caliber to ethically hunt all game animals everywhere, the rifle company does believe that any rifle equipped with the AccuFit Stock is a good place to start for any hunter.

“A hunter’s rifle is the most crucial part of his or her hunting gear,” Beth Shimanski, Director of Marketing for Savage Arms, states. “It must be accurate, reliable and built for the long haul. But to bring the most confidence to every hunter when it’s time to take that shot, the rifle must fit them. That’s exactly what we kept in mind when bringing the AccuFit stock to market in 2018. An innovative, accurate, high-quality rifle that’s suited to fit any hunter no matter the situation they are in.”

The Traveling AccuFit campaign takes the concept of “one size fits all” and intends to prove it by sending a single Model 110 Long Range Hunter rifle, chambered in .280 AI, across the United States to hunt multiple species with a variety of different hunters that vary in age, size, and experience level.

One rifle, six regions, seven hunts, and dozens of shooters. Can one rifle really be “fit for all?” Follow along this 2019 season as we set to find out www.savagearms.com/fitforall.

Sporting Arms and Ammunition Manufacturers’ Institute Publishes Accepted 12-gauge 1 ¾-inch Cartridge and Chamber Designs

Friday, September 13th, 2019

ANOKA, Minnesota – September 11, 2019 – Federal recently presented its 12-gauge 1 ¾-inch Smooth Bore Barrel cartridge and chamber designs to the Sporting Arms and Ammunition Manufacturers’ Institute (SAAMI) to be voted on for standardization. The specifications were approved and accepted as an official new cartridge recognized by the organization. Technical data and drawings of the newly accepted 12-gauge 1 ¾-inch SAAMI Standards are now published and available to the industry as a whole, as well as to the public.

“This is big news for our new Shorty Shotshell ammunition,” said Federal’s Shotshell Product Director Rick Stoeckel. “The 12-gauge 1 ¾-inch cartridge has been around for more than a decade, but it was never brought to SAAMI to be considered by its Technical Committee. Once we decided to start manufacturing this load, we immediately submitted it to SAAMI for industry standardization. We’re excited about this approval and we deeply appreciate SAAMI’s support.”

Federal’s new Shorty Shotshells deliver similar full-sized performance without the length of standard shells. Although just 1 ¾-inch long, new Shorty shotshells offer similar patterns, energy and accuracy as full-size counterparts. Now available in 8 shot, 4 buck and rifled slug loads perfect for fun at the range.

“SAAMI’s approval of the cartridge was a crucial step in legitimizing it within the industry,” continued Stoeckel. “Their work creates industry standards for the cartridge, and will hopefully inspire shotgun manufacturers to purposely build pump-action and semi-auto shotguns to specifically run 1 ¾-inch loads.”

SAAMI allows free access to technical data and drawings for accepted cartridge and chamber designs. These are posted within New SAAMI Cartridge & Chamber Designs under their Technical Information section, found at www.saami.org. A direct link to the 12-gauge 1 ¾-inch Smooth Bore Barrel Cartridge .PDF document can be viewed here: saami.org/technical-information/new-cartridge-chamber-drawings.

SAAMI was founded in 1926 at the request of the federal government and tasked with creating and publishing industry standards for safety, interchangeability, reliability and quality, as well as coordinating technical data. SAAMI’s Technical Committee, which consists of firearm and ammunition industry experts, reviewed the 1 ¾-inch, 12-gauge cartridge submission over a period of several months. The official cartridge name, maximum cartridge and minimum chamber dimensions, pressure limits, test equipment, and other characteristics are all considered and scrutinized during the process. 

For more information on Federal ammunition, visit www.federalpremium.com.

Comp-Tac Releases New Hybrid Appendix Holster: eV2 Max

Friday, September 13th, 2019

HOUSTON, Sept. 12, 2019 – Comp-Tac®, manufacturer of concealed carry, competition holsters and accessories, recently released a new appendix inside-the-waistband, hybrid holster.

 

The eV2™ Max combines the highest quality materials and design features to provide a holster that is comfortable to carry and easy to hide. The two-layer leather backing provides a comfortable barrier between the firearm and the body during IWB wear. The aircraft-grade Kydex® shell provides superior fit for a smooth, fast draw and maintains its shape for easier and safer reholstering. The largest part of the eV2™ Max’s success is in the Comp-Tac® Kick, a polymer piece added to help situate the firearm in a way to hide the grip by pushing it toward the body for a sleek and slim profile.

“Comp-Tac® has always been known for their commitment to creating functional, comfortable and high-quality concealed carry holsters and equipment,” said Randi Rogers, director of brand management and 70 time world and national shooting champion. “The eV2™ Max is the next iteration in a long line of holsters purpose built and rigorously tested. Appendix carry continues to grow in popularity with all the new compact and subcompact firearms available on the market. We strive to provide the gear that our customers want and need, and the eV2 Max™ is another step in doing just that.”

The eV2™ Max
• Kydex® shell enables easy reholster
• Features two-ply leather backing for superior comfort
• Interchangeable Kydex® shells allow for carry of multiple guns with one holster
• Ride-height-adjustable clip maximizes master grip
• Comp-Tac® Kick keeps pistol grip tucked against body
• Retention screws allow for perfect holster retention adjustment
• Available in both right and left hand
• MSRP: $67.00

See the eV2™ Max here: comp-tac.com/ev2-max-aiwb-hybrid-holster

DSEI 19 – Armadillo FR Merino Mesh

Friday, September 13th, 2019

Intended as a base layer, the wool mesh traps air providing insulation. It features padded shoulders for load carrying with thumb loops at the cuff. All stitching is flatlocked.

Made from a blend of Merino Wool and FR Polyster. Available in sizes XS-XXXL due to the tight fit.

www.armadillomerino.com

DSEI 19 – Wilcox Industries Stubby Para Grip

Friday, September 13th, 2019

Apparently, Wilcox is seeing a lot of demand for their weapon grips, between the limited real estate on many carbines causing shooters to modify their grip and the desire to maintain control for barrel thumps and other maneuvers. The Para model is hinged to stow out of the way, it is made of aluminum, so it won’t break off. Attached to Picatinny rails.

The Stubby Para Grip is 4.0″ L x 1.5″ W and weighs 6.56 oz.

www.wilcoxind.com/Stubby-Para-Grip-P176C43

DSEI 19 – Saratoga Fragment Protective Armour-Up for Light EOD/CBRN

Friday, September 13th, 2019

Germany’s Bluecher Saratoga is well known for their CBRN suits but they have also developed ballistic under garments.

Based on this work, they’ve created a lightweight vest and apron for EOD use when a full bombsuit isn’t warranted and frag is the primary concern such as dispersion devices. The ensemble weighs less than 6 kg and meets STANAG 2920 (1.1 g FSP) with V50 velocities up to 450 m/s.