SIG SAUER - Never Settle

Archive for July, 2021

Alpha TARAC with Dope Cheat Sheet

Saturday, July 31st, 2021

The Alpha TARAC is an patented aftermarket accessory designed to enhance a rifle’s max point-blank range. It allows you to engage long-range targets just like in video games, aiming on the target versus somewhere above the target. Instead of holding over the target, the device shifts the target image to be at your holdover; that simple.

For targets exceeding 300 yds (or three football fields), flip the Alpha and Aim Center as far as 5/600 yds without holdover, range estimation, or thinking.

Simple familiarization with no formal training is required. Double hit-rate probability on long-range targets, increasing from 1:5 to 1:2 with less than 1 min of training (practicing solid fundamentals). Empirically verified by USASOC.

Cross-compatible across optics, zeroes, munitions, and platforms.

Checkout www.tacomHQ.com for details, SOF-user reports, and to automatically calculate the optimal unit based on your setup.

Rex Specs – Ear Pro

Saturday, July 31st, 2021

Rex Specs Ear Pro by Zeteo Tech was developed specifically to protect military working dogs from temporary and permanent hearing loss that can arise from noise exposure. Hit this link to find out what that means in real terms.

Offered in Coyote and Black.

www.rexspecs.com/products/ear-pro

MQ-9 Agile Combat Employment: A Big Step Closer to Reality

Saturday, July 31st, 2021

CREECH AIR FORCE BASE, Nev. (AFNS) —

The 556th Test and Evaluation Squadron proved the MQ-9 Reaper’s Automatic Takeoff and Landing Capability (ATLC) is ready as of July 8, enabling crews to divert to airfields without traditional launch and recovery infrastructure or personnel. This capability is a key enabler for MQ-9 Agile Combat Employment and, combined with the MQ-9’s next software upgrade and receipt of the portable aircraft control station, will change how it will be employed in theaters worldwide.

Previously, all MQ-9 takeoffs and landings required a specialized launch and recovery crew located wherever the Reaper intended to land. But this time, with aircrew controlling the MQ-9 via satellite from their operating location at Nellis Air Force Base, the MQ-9 taxied to the runway and took off from Creech AFB, 55.6 miles away from the crew controlling it. The 556th TES recently proved this concept and landed at Creech AFB using ATLC while under satellite control from the aircrew at Nellis AFB, but this week’s sorties pushed the envelope much further.

On the first day of the two-day test, the 556th TES flew the MQ-9 from Creech AFB to Cannon AFB, New Mexico, landed, taxied, and took off again before returning to Creech AFB —  all under satellite control. In this instance, the aircrew used imagery in the cockpit to generate the reference points for the automated landing system. On the second day, the destination changed to Holloman AFB, New Mexico, and the team again proved the capability, this time using the targeting pod to survey the runway, feed the ATLC system the data needed to fly an airport traffic pattern, land, and take off again.

Initially published ATLC procedures required an MQ-9 to be at the airfield of operation to taxi down the runway and have the aircrew electronically mark reference points when the aircraft was physically in position on the runway. The sorties proved that requirement obsolete. The technology and 556th TES-derived tactics are ready today for the aircraft to divert to a foreign field where an MQ-9 has never been before, and there is no longer a requirement for specialized infrastructure to land the unmanned aerial vehicle.

“We’re taking up the chief of staff of the Air Force’s charge to accelerate change,” stated Lt. Col. Michael Chmielewski, 556th TES commander. “This is a clear win and I couldn’t be prouder of the team that put this test together, this quickly, to include the support we received from Air Force Special Operations Command and the 27th Special Operations Wing at Cannon (AFB), as well as Air Education and Training Command and the 49th Wing at Holloman (AFB). Their support and patience made the impact of this test what it needed to be and we are grateful for the opportunity to work with them.”

According to Chmielewski, the ATLC capability will shift the Remotely Piloted Aircraft Enterprise’s mindset. It sets the enterprise up to become more agile with the next scheduled software release in spring 2022.

556th Test and Evaluation Squadron

Photos by photo by A1C Jessica Sanchez

ALTI Selects Silvus StreamCasters as Primary Radio for All Medium and Large Aircraft

Friday, July 30th, 2021

Silvus Chosen for Ability to Provide Reliable Video Feed and Flight Data from Extended Ranges
Los Angeles, California (July 21, 2021) – Silvus Technologies, Inc. (“Silvus”) today announced the company has been selected as ALTI UAS’ (“ALTI”) primary radio, providing high-quality video and flight data for all medium and large unmanned aircraft. The radios were selected for their proven performance at extended ranges and their ability to reliably maintain a data link in austere environments – an essential requirement due to the surveillance and security applications of ALTI’s aircraft.

“As a leading VTOL unmanned aircraft manufacturer, we are constantly improving the quality of our platforms,” said Duran De Villiers, Director of ALTI. “After extensive testing, Silvus radios excelled at greater ranges than all other radios that we tested. Silvus’ performance, coupled with the hardware quality and functionality of the radios, is a critical addition to our platform and brings tremendous value to our customers,” added Development Manager Jaco Horn.

StreamCaster radios, which ALTI has previously used for demonstration and development platforms, were also selected for their sophisticated eigen beamforming technique. As ALTI continues development of their largest aircraft and corresponding data link, StreamCaster radios will be essential to maintaining the same level of performance and reliability at extended ranges.

“We strive to provide a single-radio solution for the toughest unmanned systems communications scenarios,” said Jimi Henderson, Silvus Vice President of Sales. “ALTI is a leader in the unmanned space, and we are proud to be selected as the primary radio for their aircraft, delivering unrivaled performance and unmatched range.”

In Memorial – USMC Gunner Jesse Schertz

Friday, July 30th, 2021

Retired Marine Gunner Jesse Schertz passed away unexpectedly on July 9th, when he was tragically struck by a vehicle in Stafford, VA.

While many knew Gunner Schertz during his career in the Marines, I did not meet him until he worked for Aimpoint. He was very friendly and knowledgeable. He will be missed.

There will be a celebration of life event on 31 July (Saturday) at the VFW Hall, located at 111 A. View Ave, Norfolk VA 23503 from 15:00-22:00 (3:00pm-10:00pm).

His memorial page can be found here.

Additionally, his friends have organized a fundraiser for his family at www.gofundme.com/f/jesse-schertz-memorial-fundraiser.

May He Rest In Peace.

Sterling Rope Company Launches Category Changing XEROS Technology: A Revolution in Dry Rope

Friday, July 30th, 2021

Sterling Rope Company is proud to announce the release of XEROS technology to most of their climbing ropes. XEROS is a new way to manufacture a UIAA Certified dry rope that is more effective, wear resistant, better for the environment, and at a lower cost. This also significantly reduces the number of SKUS and helps make the rope buying process easier on consumers and dealers. XEROS is exclusively available from Sterling Rope.

So, why are XEROS ropes so amazing?

Wet rope is weaker rope. The numbers don’t lie: Rope loses 20% to 40% of its strength when wet. And that can happen if you’re caught in a downpour, climbing an icy pitch, or even just dealing with prolonged exposure to high humidity.

The solution? Dry rope.

But it’s not a perfect solution. Traditional dry ropes are made “dry” with an exterior coating that keeps water out. That coating can wear (leaving the rope vulnerable to water), the finish can feel tacky (so it picks up dirt), and the process to coat the rope is labor-intensive—increasing cost and waste.

Sterling wanted to do better and went back to the drawing board for what a dry rope could be. In the process, they uncovered a whole new way to make dry rope.

This is XEROS technology

Through an exclusive partnership, Sterling spent the past three years working closely with their bluesign®-certified nylon yarn supplier to develop an entirely new way to create dry rope.

What Sterling created is not a coating applied to the rope, or a separate liquid bath treatment. It’s a new step in the manufacturing process of individual nylon fibers, before they’re even twisted into yarn, that makes each fiber water resistant. When making dry rope using these fibers, the result is a product that blows traditional dry rope out of the water.

“Overall, I am blown away by the performance of the XEROS dry treatment. There is simply not enough to be said about its quality. The DryXP NanoIX we’ve all used for a long time is already my preferred rope and I’m psyched to see it evolve to the next level with XEROS technology.”—Benny Lieber, Sterling Athlete and field tester

And that’s not the only thing that makes XEROS technology a breakthrough. Along with being PFOA-free, like all Sterling ropes, the XEROS technology process:

• Reduces waste
• Reduces energy use
• Reduces labor

In other words, this new process is better for the environment. And best of all, climbing rope with XEROS technology costs significantly less than rope made with traditional dry treatments. That’s right—there’s no premium to pay for a rope that’s truly ready for anything.

Stay strong in the wet

XEROS technology creates a dry rope with next-level performance—and without a sticky, vulnerable-to-wear outer coating. Because of the process, both the core and sheath are protected with XEROS, which reduces performance issues related to sheath slippage. All for a minimal price increase over traditional non-dry rope.

Sterling XEROS Ropes are available in:
• Duetto 8.4 mm
• Aero 9.2 mm
• IonR9.4mm
• Quest 9.6 mm
• Velocity 9.8 mm
• T-10 10.0 mm

Sterling Xeros Ropes will be available July 1, 2021 at REI, MEC and at SterlingRope.com. They will be available through all Sterling dealers starting September 1, 2021.

To hear more about Xeros, please check out this video by Sterling’s VP of Product and Marketing, Phil Shettig.

For more information, www.sterlingrope.com and www.verticalsupplygroup.com.

Chase Tactical Xmas in July SALE

Friday, July 30th, 2021

• 21% OFF Through 8/2

• Coupon Code: JULYXMAS21

www.chasetactical.com

Luminae Shooter Belt

Friday, July 30th, 2021

Luminae claims that their Shooter Belt is the most rigid shooters belt on the market. It is a low profile, extra stiff and ultra light belt system, made from a carbon based composite. It comes with an inner velcro belt as standard and is PALS compatible.

One interesting feature is the Luminae Custom Multicam Polymer Cobra Buckle.

The belt is fully adjustable from sizes 28″ waist to a 38″ waist.

www.luminae.co.uk