SureFire

Archive for February, 2022

The Agilite Pincer Placard 5.56 is Live

Thursday, February 17th, 2022

The Patented Agilite Pincer Placard™ uses revolutionary funneled magwells and other features that solve some major mag pouch issues-check out the video to see how it works:

www.agilitegear.com

MATBOCK – CFA Duffle & Berserker v3 Plate Carrier

Thursday, February 17th, 2022

As we continue to go over the new products launched by MATBOCK at SHOT Show, we go over the CFA Duffle and Berserker v3 Plate Carrier.

CFA Duffle

Finally! A durable and lightweight duffle bag is here! The CFAD duffle easily holds a long weekend’s worth of gear and is made with our extremely durable Ghost Heavy material. This bag easily meets all airline and train  requirements for a carry on bag. The Ghost Heavy material will keep your gear dry from inclement weather and is durable enough to resist ripping, punctures and abrasions. 100% made in the USA

Features:

– Made from our Ghost Heavy material for superior puncture, rip, and abrasion-resistance.  Ghost Heavy will not absorb water, chemicals, or pathogens and can be sanitized without degradation of the material.

– Large angled zipper gives you access to the entire volume of the bag with ease

– Handles and straps made from MILSPEC webbing. Shoulder strap attached with snap hooks for ease of use and replacement.

Spec:

Dimensions:  58cm L x 30.48cm W x 25cm H / 20 L” x 12 W” x 10 H“

Weights:        0.861826kg / 1.9lbs

Volume:         2379 cu.in. / 39L

Material:         Ghost Heavy

Berserker v3 Plate Carrier

It’s here! Introducing the Berserker V3, our lightweight, durable and hydrophobic plate carrier. Made from our Ghost material the Berserker V3 is strong, lightweight, and does not absorb water, sweat, or chemicals-making it ideal for maritime and tropical environments. Additionally, our Ghost material transfers heat away from your body, keeping you cooler and reducing your overall thermal signature. Weighing only 14 ounces, the Berserker V3 comes with everything you need; 5.56 magazine insert, a zipper insert for the kangaroo pouch, dual radio pouches, side armor plate pockets, shoulder pads, and a reinforced drag handle. The Berserker V3 fits a variety of plates due to four way stretch material and comes in a swimmer cut or SAPI / ESAPI version.

Features:

– Customize your carrier to suit your needs via precision laser cut Molle

– Includes a three 5.56 magazine insert and zipper insert for the kangaroo pouch

– 4-way stretch material to allow a variety of plates to fit in the carrier.

– Two sewn-in radio pouches that disperse heat

– Ghost and Ghost Lite can be sanitized without compromising the integrity of the material

NSN: 8470-01-686-0378

MATBOCK Products are handmade to order, so lead times can vary. Please contact orders@matbock.com with questions on current production lead times.

Simplified Human/Machine Interfaces Top List of Critical DOD Technologies

Thursday, February 17th, 2022

WASHINGTON — A modern-day cell phone packs quite a wallop when it comes to computing technology and capability. But most cell phones barely come with a “quick start guide,” let alone an instruction manual that spells out how to use all the features.

Cell phone companies have mastered the interface between humans and technology, making their use entirely intuitive and rendering thick instruction manuals a thing of the past.

The same thing should be happening for weapons systems used by servicemembers, Heidi Shyu, who serves as the undersecretary of defense for research and engineering, said. During a virtual discussion today with the Potomac Officers Club near Washington, D.C., she said intuitive, easy-to-use human/machine interfaces is something that’s a priority for her and the Defense Department.

“When I [served as an executive for the] Army before, one of the experiences I learned is with a lot of our weapons system, you really have to have a manual and go through weeks of training, if not months and years to be proficient, which is ridiculous,” she said. “[Weapons systems] ought to be designed with the appropriate ease-of-use human/machine interface, so it will become much more intuitive.”

As the Defense Department’s chief technology officer, Shyu said she’s interested in developing better ways to simplify the way service members use the technology they are given in order to reduce the training burden and learning curve.

“I really would like to see how we can change our weapons systems’ human/machine interface to be a lot more intuitive, to ease the amount of training that’s required,” she said.

For most service members, combat means use of a weapon such as a rifle, an aircraft that can drop a bomb or launch a missile, or a ship or tank that fires a large gun that requires a round to be loaded. All of these kinetic weapons systems fire solid projectiles which need to be carried along with warfighters, and which may eventually run out. But a new generation of weapons systems, which uses directed energy rather than expendable ammunition or ordnance, is on the horizon, Shyu said.

“In the area of directed energy, we’re … finally at the cusp of developing laser technology,” she said. “After 30 years, we’re finally getting to the point of fielding the prototypes. So I’m thrilled. Army and Navy are [both] fielding laser systems. I’m really happy to see that. We’re also developing high-power microwave systems as well.”

The Optical Dazzling Interdictor, Navy program, or ODIN for short, is a nonlethal weapons system used to confuse and perhaps render harmless an enemy drone — rather than shooting it down.

The ODIN system is already installed on multiple Arleigh Burke-class guided-missile destroyers within the Navy’s fleet, and there are plans to install additional systems as well.

The Army is also developing several directed energy systems. One of those is the Directed Energy Maneuver-Short Range Air Defense, or DE M-SHORAD system, which involves a 50kW-class laser to protect divisions and brigade combat teams from unmanned aerial systems, rotary-wing aircraft, and threats from rockets, artillery and mortars.

The department is also interested in the development of advanced materials, Shyu said.

“I’m certainly interested in materials that can handle higher heat, higher temperature, next-generation hypersonic materials,” she said. “I’m interested in material that’s stronger, but lighter weight. It certainly can help us reduce the logistics burden; and also materials that can have higher efficiency — materials that can potentially change properties. [There are] a lot of different areas within advanced materials we need to continue to push the research in.”

The department is also doing its part to bring the manufacture of microelectronics back to the U.S. to improve supply chain reliability, Shyu said.

“You guys have all heard about the situation that we’re in with the supply chain, where 70% of our chips are coming from Asia,” she said. “That poses a supply chain risk. You can see there’s a lot of interest on the Hill in terms of helping out the microelectronics foundries to try to onshore some of the capabilities.”

Shyu said the Defense Department is working closely with the Department of Commerce and with foundry companies to make that happen.

“We also work very closely with intelligence communities to make sure we understand all the needs and figure out how we can leverage commercial processes which can evolve at a much faster rate than just the defense-unique foundry,” she said.

Finally, Shyu said, the department is interested in having the U.S. take the lead on the development of 5G technologies — and the advancement of the next-generation of radio communications as well.

“I call it the ‘next G’,” she said. “Namely, beyond 5G. What I don’t want to happen is for us to take our eyes off the ball and play catch-up. I’m interested in making sure we’re developing technologies on 6G and 7G, so we, the U.S., can shape the standards, as opposed to some other country shaping the standard and us playing catch-up.”

By C. Todd Lopez

Department of Defense Awards Silvus Technologies Purchase Order for Streamcaster Radios

Wednesday, February 16th, 2022

Los Angeles, California (February, 2022) – Silvus Technologies, Inc. (“Silvus”) today announced the company has been awarded a second purchase order under an unnamed Department of Defense program. Initially contracted to deliver 1,000 radios in May 2020, Silvus’ success in supporting rigorous integration and testing resulted in the additional order. The second radio contract received by Silvus will result in a substantial increase of StreamCaster radios in the hands of our troops.

During trials in support of the program, Silvus’ proven performance was demonstrated  as their radios were subjected to electronic warfare jamming environments where Silvus’ Interference Avoidance capabilities allowed the network to support the traffic in contested spectrum environments. Of particular importance was the StreamCaster’s ability to perform at scale and range without having to trade off anti-jam capabilities like other radio systems. StreamCasters exceeded all threshold requirements and met or exceeded many objective requirements for the Single Channel Data Radio program.

“At Silvus, we take great pride in our ability to rapidly produce cutting edge technology to meet the needs of the warfighter,” said Colonel (Ret.) Mike Kell, Silvus Director of Army Strategic Programs. “This second purchase order represents not only a significant milestone in supporting the Department of Defense with state-of-the-art data radios, but also a major step forward in realizing the military objective of providing greater capabilities towards a more lethal soldier connected into a unified network.”

The StreamCaster Radios were selected due to their optimization for low size/weight/power (“SWaP”), high scalability, high throughput, and resilient connectivity in harsh environments, providing the soldier with real time data transmission for situational awareness in dynamic, unpredictable circumstances. Silvus’ radio is also the only low SWaP radio capable of supporting a 140-node, company-scale network at 1.25 MHz bandwidth at a range greater than 1 KM.

Grey Birch Foundation DLX for the 10/22

Wednesday, February 16th, 2022

In stock and shipping now through Brownells USA is the Grey Birch Foundation DLX for the 10/22. Modernize your 10/22 with this feature rich chassis system providing full adjustability and lots of real estate for accessories.

Features/Specs:

• Magwell Cutout for Easy Magazine Changes

• AR Grip Compatible Mounting Point (Includes Grey Birch Grip)

• Standard Picatinny Stock Mount (Compatible with all most Picatinny Mounted Stocks)

• Modular 10″ Forend

• Forend M-Lok and Arca-Swiss Compatible

• Ambi QD Points on Forend & Stock

• Folding Stock (Stock can be Locked in the Fixed Position)

• Length of Pull and Cheek Weld Adjustment

• Rear Tension Point, Double Locking

• Weight:  688 grams

• Length Of Pull:  13″ – 14.5″

• Overall Length:  29.5 – 30.5″

• Overall Length Folded: 20.5″

• Rail Length: 10”

• Material: 6061 T6 AL

• Finish: Clear Hard Anodize

For more information, please go to www.greybirchsolutions.com.

www.instagram.com/greybirchsolutions

www.facebook.com/GreyBirchSolutions

That’s not all

Also shipping soon through Brownells USA is the brand new Foundation 457 Chassis System.

The Foundation 457 Chassis was designed to turn your stock CZ 457 into a fully adjustable rifle system, giving the ability to add or remove weight, dial in the perfect fit, and to fold the stock for easy storage.

Features/Specs:

• Integral Recoil Lug

• Purpose Built Magwell Cutout for Easier Magazine Changes

• AR Grip Compatible Mounting Point 

• Enhanced Ergonomic Alignment between the Grip and Trigger

• Standard Picatinny Stock Mount (Compatible with all most Picatinny Mounted Stocks)

• Modular 10″ Forend 

• Forend M-Lok and Arca-Swiss Compatible

• Ambi QD Points on Forend & Stock

• Folding Stock (Stock can be Locked in the Fixed Position)

• Length of Pull and Cheek Weld Adjustment

• Weight:  1040 grams (37oz)

• Length Of Pull:  13″ – 14.5″

• Overall Length:  29.5 – 30.5″

• Overall Length Folded: 20.5″

• Material: 6061 T6 AL

• Finish: Clear Hard Anodize  

For more information, please go to www.greybirchsolutions.com.

www.instagram.com/greybirchsolutions

www.facebook.com/GreyBirchSolutions

MSR Distribution Welcomes Clint Bennett

Wednesday, February 16th, 2022

MSR Distribution has announced that Clint Bennett has been appointed as Business Development Manager. Clint has over 22 years’ experience in the defense industry specializing in sales and distribution channels.

Says Clint: “In my experience, I have grown to understand that this market is more than just simply competitive. My personal philosophy is to do my best to treat each customer with the highest level of respect and courtesy …. it takes months to gain a customer, years to develop that relationship into a partnership and only seconds to lose it if not treated fairly and professionally.”

Ross Botha, General Manager at MSR, told us: “We are very excited to have Clint onboard, his wealth of experience in manufacturing and distribution spheres makes him an asset; not only to MSR, but to our customers and employees too.”

MSR Distribution is a wholesale distributor that sells hard-to-find and highly sought-after products to licensed retailers and specific qualified entities. Every year, countless dealers trust MSR Distribution to help them grow their businesses by providing great products with reliable margins. Clint will form an integral part of forging sustainable and mutually beneficial relationships with customers. He will play a critical role in developing the MSR customer experience and sculpting the customer care and sales team.

www.msrdistribution.com

 

U.S. Defense Logistics Agency Awards Helmet Contract to Avon Protection

Wednesday, February 16th, 2022

Avon Protection is pleased to announce the award of a contract to supply the U.S. Defense Logistics Agency with the second-generation Advanced Combat Helmet (ACH).

The ACH compliments Avon Protection’s market leading ballistic helmet product portfolio with a polyethylene solution that is comfortable and lightweight whilst still providing exceptional performance. The ACH and its commercial derivatives, including the F90 helmet, leverage Avon Protection’s helmet shell moulding capabilities and retention system with Team Wendy’s helmet liner system technologies to deliver world class protection-to-weight ballistic helmets to the modern warfighter. 

The contract has a maximum value of $204 million over a five-year duration, being a one-year base period with a maximum value of $46 million plus four further one-year extension options. The base year has a minimum value of $7 million.

Commenting on the contract award, Steve Elwell, President EMEA & AP, said:

“This is another significant, multi-year helmet contract for Avon Protection and builds on our longstanding history as the incumbent provider of ballistic helmet technology to the U.S. Armed Forces.

This contract reflects the continued confidence and reliance on Avon Protection to supply products of the highest quality and performance to protect armed forces around the world.”

USSOCOM Buys Additional Special Operations Forces Tactical Communications Next Generation Manpack, AN/PRC-167 Radios

Wednesday, February 16th, 2022

The Department of Defense recently announced:

L3Harris Technologies Inc., Rochester, New York, received a modification (P00019) in the amount of $297,200,000 on indefinite-delivery/indefinite-quantity contract H92222-17-D-0021 to allow for the continued purchase of the Special Operations Forces Tactical Communications Next Generation Manpack, AN/PRC 167 radios and ancillary equipment. This modification increases the maximum contract ceiling value from $255,000,000, to $552,200,000. No funds are being obligated via this modification. The majority of the work will be performed in Rochester, New York. This contract modification was awarded through other than full and open competition under 10 U.S. Code 2304(c)(1). U.S. Special Operations Command Headquarters, Tampa, Florida, is the contracting activity.