TYR Tactical

Author Archive

Greyhive Snapshot – Drew Estell

Saturday, February 24th, 2018

How Do You Scan and Identify Targets?

How do we properly scan? We’ve all the seen people on the range that keep their eyes in their sights and move their weapon from left to right as a habit. While it looks good and they are checking the block on performing this critical task, sometimes those people aren’t actually identifying anything and are setting themselves up for failure.

If you keep your eyes in your sight while scanning, you are limiting yourself to what is within that toilet paper tube sized housing. With some sights, this is even smaller. As much as we train to go into broad target focus with the sight in line with our eyes, having it there will inevitably pull you back into what’s only visible from that housing. On top of this, red dot is already on your target.

We put our sights on target thousands of times and pull the trigger. Do you think anything will be different when you have to discriminate between a threat and a non-threat? Your brain has been wired to see a red dot or sights on target and pull the trigger. How about when other good guys have a weapon like a police officer responding to a call? Give yourself the time and space necessary to properly identify those around you in an actual situation. By lowering the weapon slightly so that the sights are not immediately visible and on your target, you are creating the amount of time and space necessary for your brain to identify the target, and potentially tell your firing hand not to pull the trigger if needed. I would want that split second extra to determine if what was in the suspect’s hand was a cell phone, an unidentified person holding a badge, or the shape in the middle of the night was actually my wife who accidently tripped over my gym bag while she was checking on the kiddo. There’s a lot of situations that this could be important, I’m sure you can think of several and add it to the comments below.

A good rule of thumb with a rifle is to be able to turn your chin over your buttstock. With a pistol, lower the gun down to your upper chest or break it back enough to be able to see the torso area of those around you. Hands aren’t always above the shoulder line to determine if they have a gun, and badges aren’t always high on the chest to easily see. When you have your weapon pressed out in your line of sight, you are effectively cutting off the majority or the torso that gives us the ability to identify what we need, get a snapshot of the person, and proceed into our “snapshot… hands, aim, shoot” process of target identification.

Scan with your eyes and actually identify the targets to your left and right of your area. ID target, engage until target begins to go down, gun down, eyes lead gun, and snap onto next target if required. Use your eyes to gather information and determine whether or not you will give commands or engage depending on your situation. You can only shoot as fast as you can see, and you can only make decision as fast as you can process information. Don’t limit yourself on either, or set yourself up for failure.

thumbnail Drew Estell is the owner of BAER Solutions, and served for a decade in Special Operations. He has been fortunate enough to serve with soldiers and instructors who were invested in his success, and as such have benefited from the years of experience that each of them had. During the course of his multiple combat deployments and experiences, he has learned that no shooter is the same.

In addition to weapons training classes, BAER Solutions offers leadership and team building consultations. BAER Solutions also works with police departments to take lessons learned from SOF deployments and apply them to the specific needs of the local governance and populace. By combining SOF tenets of Village Stability Operations and the concept of Community Policing, they deliver a consulting and training package called Unconventional Policing.

For more information this topic, create your free account at Greyhive and subscribe to our YouTube channel to watch the pistol ready position videos demonstrating this.

Snapshot is a bi-weekly series from Greyhive featuring content written by our Experts. It is our goal to deliver information that prompts you to examine your preparedness from all angles, not just how quickly and accurately you shoot.

SPARTANAT – Interview With TARDIGRADE TACTICAL

Tuesday, February 20th, 2018

SPARTANAT: Tardigrade Tactical, you are from Denmark. What do you specialize in?

We specialize in designing and developing equipment for military and law enforcement end-users. – Equipment that cuts down on bulk, weight and comprises and integrates functionality in each design. We work hard to fit all functions into one layer rather than to do several layers, with each layer having a different function – both in a literal sense with layers of fabric but also in a more holistic sense, knowing that our products will become a part of an end-user’s complete setup – most likely wearing issued kit and other brands of gear. It’s really all about focusing on helping the end user perform as good as possible. We actually produce products meant specifically to be integrated with the professional end-user’s issued kit. We know that some departments of the military and the Danish law enforcement have strict guidelines on what’s allowed to be worn and we work around that issue with a “low footprint integration” in mind, basically ending up with designs that looks like an integrated part of the original gear. This makes it a lot easier for the end-user to wear his gear and focus on his task at hand rather than being concerned of what his or her leaders might think of a non-issued product – which is a very real issue these days.

Tradigrade5

SPARTANAT: How long have you manufactured gear? How did it all begin?

We have been manufacturing gear since 2011, but it all really started when I was deployed the Helmand Province, Afghanistan in 2009, with a small reconnaissance unit. At that time, we bought a lot of our own kit and spent tons on money making our setup perfect. We imported most of the stuff from USA but the integration with our issued kit, at the time, was never perfect. It lacked a “Danish touch”. I started doing sketches on different designs during our down-time in the FOB (Forward Operation Base), and figured I needed a creative hobby to focus on, in my spare time, when returning to Denmark. When I returned home to Denmark after my deployment, I bought my first industrial sewing machine and spent a few years learning different design- and manufacturing processes – basically learning the “source code” on how to turn fabric and webbing into a piece of gear. For a few years I was designing sewing gear for my colleges, in my basement, but things really escalated in 2015, when we set up shop in an old building not far from my home, in Copenhagen.

Today, my business partner Frederik and I run the company and have two employees working at our facility on a daily basis, producing gear for several web shops and retailers as well as government departments and SOF units.

Tradigrade8

SPARTANAT: You have a logo not easy to identify. What does it show and why?

Yes, we are often asked that question and I always enjoy telling people about the meaning behind our name and logo. The Tardigrade is a small organism, gaining more and more popularity due to its tough attributes. When the Tardigrade is in a certain state, it has the ability to withstand extreme temperature fluctuations, radiation and even the vacuum of space. The creature is no more than 1 mm of size, but lives in all corners of the world, making it really great mascot for our brand: sturdy, versatile and with a small foot print. I have always been very fascinated with science and biology and have always admired the low profile of the tardigrade, that is most likely the only living organism to outlive all other, here on Earth.

SPARTANAT: What’s your favorite product?

TARDIGRADE TACTICAL LOW PROFILE LAMINATE BELT jpg

My favorite product? That’s a hard one to answer. I love all my children… I’ll have pick the one that has made the most impact with our customers, specifically those in the Danish Army: the “Low Profile Laminate Belt (beta)” so far has proven to be a great piece of kit for the soldiers, wearing heavy MOLLE belts. It’s really light weight, has a very low profile and very easy to adjust, using hook and loop. The belt is designed to follow the curvature of the hip and to do nothing more than keeping the operator’s pants in place. The idea came from wearing big, bulky rigger belts (that does not serve any other purpose, anyways) under the issued MOLLE belts. Big belts on top of each other will created fatigue, irritation and soars, during longer patrols. The “Low Profile Laminate Belt (beta)” does not, as it is so light and thin, you can hardly feel it, when wearing it. We plan to crowd fund the final version of the belt, for an international audience within a few months, as we think it has a very big potential.

Tradigrade2

Also, worth mentioning is the combination of our “Tardigrade Tactical – Speed Reload Pouch, 5,56 Rifle” and “Tardigrade Tactical – Light Weight Dump Pouch”. Two products that has been around since approx. 2012. A great deal of effort has been put into designing these two products, basically to give the operator the option of placing two pouches on the same space normally used for one pouch, with the MOLLE/PALS on the inside of the dump pouch. The “Tardigrade Tactical – Speed Reload Pouch 5,56 Rifle” is very light weight, very small but very functional magazine pouch, designed to allow the operator at full grip of the magazine when drawing for a speed reload. The design allows for adjusting the tension on the magazine and the opening allows for an easy insertion on a full magazine during breaks in engagements: a soldier should never take his eyes away from the thread, even when rearranging his full magazines.

Tradigrade6

SPARTANAT: Anything you want to tell your costumers? 3-5 pictures, portrait (if wanted), give us a short bio

Absolutely! A big thank you so far for supporting our brand and project! Also, a big thank you to all service members using our products down range and providing us with much appreciated end-user feedback! This helps us to continually design products that will fit the needs of future end-users deploying worldwide.

Finally, I very much appreciate all the different individuals we meet during shows, helping us to gain a bigger and better understanding of the industry as a whole and in detail.

Tradigrade

Bio:

Name: Birk Anton Knudsen.
Age: 30
Geo: Copenhagen
CEO and founder of Tardigrade Tactical.
Military background: Corporal in the Danish Army since 2007 – Reconnaissance and Armored Infantry (PNINF), Gardehusar Regiment, Slagelse.
Deployments: Helmand, Afghanistan

http://www.tardigradetactical.dk/
http://spartanat.com/

Warriors Online Tactical Magazine – Commando Assault Vehicle (CAV)

Saturday, February 17th, 2018

This is a piece by Bryan Ferreira of Warriors, a Portuguese online tactical magazine on the Portuguese Commando Assault Vehicle.

C57I1781

In the world of Elite Commando Units there are hundreds of light assault vehicles. Land Rover is one the most prominent builders in this area, since the famous Special Air Service (SAS) pink panthers of 50’s, to today’s Australian SAS 6×6 desert patrol vehicles and the pictured Portuguese Commandos, Commando Assault Vehicle (CAV). The CAV are presently deployed in Central African Republic in the UN MINUSCA mission and their multitask capabilities are a must have for any unit.

C57I6795

Afghanistan’s operations changed the role and usage of this kind of vehicles as the war demanded for more heavy armor to defeat the IED (improved explosive device) threat. They were put aside and replaced for MRAP and APC vehicles. But with terrorism spreading all over Africa, the presence of small detachments of Elite Forces in so many places needs to be supported with vehicles that not only permit high mobility, range and firepower, but that can be easily airborne and relocated where they are most needed. They also have the big advantage of being relatively cheap, so abandoning and destroying them isn’t that uncommon in Special Operations. The CAV is a Land Rover 130 TD4 all-wheel drive and it only has light armor in the floor to give some protection against small explosive devices, what allows it to go to speeds of up to 145km/h (90miles/h). It takes a crew of 5+1, with 4 swing arms for the passengers (3 to the sides and one rewards) and a central 360° rotating ring mount. This permits them to have a wide range of weapons to employ in these vehicles. In the passengers mounts they use either the HK (Heckler & Koch) Mg4 in 5,56x45mm or the Rheinmetall Mg3 in 7,62x51mm. In the central rotating mount they will use the MG3, the Browning M2 (12,7x99mm) or even the HK GMG 40x53mm Automatic grenade Launcher. They usually carry additional firepower, the famous 84mm Carl-Gustaf recoilless rifle, which is one of the most versatile rocket launchers in the market, and a 60mm lightweight handheld mortar.

IMG_8699-3

The CAV can be used as an assault vehicle but it will also perform very well as Long Range Reconnaissance asset. Either in an Airport Airborne assault as in the hunt for enemy insurgents, this is one Commando lethal vehicle.

http://warriors.pt/

Accu-Tac introduces the new HD-50 Bipod

Tuesday, February 13th, 2018

For Immediate Release: Debuted at SHOT Show 2018, the Accu-Tac HD-50 (Heavy Duty 50BMG) is the newest product in the AccuTac family of Bipods and was designed specifically for use on 50 BMG caliber rifles. The HD-50 is our most robust bipod which is achieved by making the Arm Lock Lugs larger to withstand the heavy recoil of a 50 BMG. The HD-50 bipod also has the ability to Cant and has a very sturdy throw lever allowing you to adjust the tension and enhance the ability to lock the canting motion in to place. The legs can be extended into nine different height options and its wider center hub delivers more stability and strength to support larger heavy rifles.

Accu-Tac HD50 Bipod - No WM 014_preview

SPECS
– MATERIAL: 6061 T6 Aluminum Alloy
– MIN HEIGHT: 7.0″ – 177.8mm
– MAX HEIGHT: 10.0″ – 254.0mm
– MIN STANCE: 13.5″ – 342.9mm (Legs at 90 degree deployed)
– MAX STANCE: 17.5″ – 444.5mm (Legs at 90 degree deployed)
– CLOSED POSITION WIDTH: 5.5″ – 139.7mm
– CLOSED POSITION LENGTH: 9.0″ – 228.0mm
– WEIGHT : 27.5 oz
– COLOR : FLAT BLACK
– COATING: Type III – Hard Anodize

The Accu-Tac HD-50 bipod will be available soon at all Accu-Tac dealers as well as www.Accu-Tac.com where you can also view our full line of world class bipods, bipod accessories, muzzle brakes and scope rings.. For more information please contact us at info@accu-tac.com.

A Quick Look At The Polish DROMADER Individual Equipment Program

Monday, February 12th, 2018

At the end of the recent article regarding Poland’s ongoing efforts of selecting a new camouflage pattern for its armed forces, there was a brief mention of the DROMADER individual equipment program, which is planned to be implemented, regardless of the final camouflage pattern chosen. Although info is limited, we did receive an update on the program regarding a consortium of PGZ companies which are being used to expand DROMANDER to include other specialist needs.

One such expansion is DROMADER-SF, which is aimed at police and army counter-terrorist units, images for which you can see above.

We were also provided with images detailing a comparison between DROMADER soldier with MSBS / GROT rifle in MAPA camo and a standard PL Soldier in wz. 93 camo, “Kandahar” vest and “BERYL” wz. 96. rifle.

Corps Strength – Raise The (Your) Bar

Saturday, February 10th, 2018

The recent release of President Trump’s annual physical caused quite a stir, (as everything related to the President seems too). The official result was that his overall health was rated as “excellent”. During the oral debrief, the doctor also said that the President had inherited some “great genes”. You can read the official report for yourself here: Trump Physical. After it came out, there was a lot of statements from various doctors and other medical specialists disputing the conclusions of those results. Many raised the opinion that rating the Presidents overall health as excellent was extremely optimistic, considering his being very overweight and less than ideal blood test numbers. There were many others who seriously doubted that he weighed in at the reported 239lbs and in fact was probably at least 250lbs, or even much heavier. I tend to agree there, having see him close up myself, as I thought he looks much heavier in person than what was listed. But, who knows, maybe they took off 20lbs for his wallet? In any case, no disrespect, I wish him a long life and best of health for him and our country.

Politics aside, lets just look at the facts (not alternative facts), that we do know. The President doesn’t exercise, though he does golf a lot. However, he always rides in a cart while playing. I heard him say once: “Walking on the gold course is too slow”. True, but riding in a cart does take away the only part of golfing you could realistically call exercise, which is the walking. On other hand his eating habits have been well reported (and boasted about by him), and are about as bad as it gets, with diet soda and fast food being the mainstays. On the positive side, the President has never drank alcohol or smoked in his life and those two good habits have no doubt gone a long way to keeping him as healthy as he is. Also, realistically compared to the rest of us, he’s had a pretty easy life, having never served in the military, or did any other manual labor. Plus, it goes without saying he’s never worried about health care costs, paying the bills, kids college, etc. Though, I’m sure he had plenty of other mental stress over the years running his business empire, especially when going bankrupt several times. However, to me he most interesting thing about President Trump’s health and/or fitness, is that while he makes no pretense of trying to eat right, or exercise, still brags about his great health and energy? Presidents Bush, Obama and even Clinton did demonstrate some actual effort (and a little humility) in that area. Remember the tapes of Clinton jogging to McDonald’s? I think this weird bluster on the President’s part speaks in part to what people actually think (and accept) of what’s considered excellent health and fitness nowadays. In other words, the bar is set pretty low.

thumbnail

I’m sure many people reading this would think, “Hey I would like to be as healthy as him when I’m 71”. Ok, but I’m not one of them, as I for one would feel pretty shitty if I was for all practical (and optical) purposes obese and was limited with just playing golf as my only physical activity. I think that the vast majority of people (even those like myself that aren’t rich or famous), can do better, and should expect to do much better. Take the example of Yuichiro Miura, who scaled Mt Everest at the age of 80. In fact he scaled Everest three times, all over the age of 70. Or 73 year old South African Otto Thaning, who became the oldest person to swim the English Channel in 2014. Or for a more recent example; Gary Patton (note the picture) who this past Dec set the world (over age 70) indoor mile record, running a 5:21 at age 71! Now these are extreme examples (there are many more) of some extraordinary physical accomplishments by people around President Trump’s age and older. I get that not very many people want to do those things (just like I never wanted to be president), at any age. I also get that playing golf, mowing your lawn and/or sitting in a soft chair watching TV is many people’s old age fantasy, but not everyones, certainly not mine. IMO there is a much better happy medium between the sedentary and physically limited old age stereotype, and extreme physical examples like those mentioned above and getting yourself to that sweet spot, is more about mindset and effort than just “great genes”.

My simple point here is not to be deceived that being very overweight and just being able to play a round of golf represents excellent health at age 71, or age for that matter. A consistent plan of REAL exercise combined with a diet made up of simple foods in the right amounts, can keep help you very healthy, get your weight right and ramp up your fitness to what ever level your goals may take you. We are all going to eventually take the dirt nap, as dying is as much a part of life as being born. However, rather than sitting around watching cable and tweeting about politics, I would rather go out like multiple marathon age group record holder Ed Whitlock, who after running a new world record marathon of less than four hours at the age 85, died six months later in his sleep. After living a long life, literally in the fast lane, he is now the perfect example of resting in peace. Till next month:

“Be safe always, be good when you can.”

Semper Fi

MGunz

Primary Weapons Systems Releases Multiple New Product Lines at SHOT Show

Tuesday, February 6th, 2018

Primary Weapons Systems released multiple new product lines and updates at SHOT Show last month.

MK109_MOD2-M_Rifle_45

Starting with the MOD 1-M line (replacing the MK1 MOD 1-P line) with M-LOK handguards and Radian Raptor charging handles. Keeping the internals the same, the MK1 MOD 1-M line got a simple facelift. To match that, the MK2 MOD 1-M line also got M-LOK handguards and Radian Raptor charging handles.

MK216_MOD2-M_Rifle_45

Past the more expected updates, we take a look at the MK1 MOD 2-M line which replaces the MK1 MOD 2 line. The MK1 MOD 2-M line features not just an M-LOK handguard, but their patent pending PicLok handguard. Yes, it offers M-LOK along the entire length of the handguard, but also offers Picatinny in the front quarter of the rail. What sets the PWS MK1 MOD 2-M handguards apart, is the fact that M-LOK accessories direct thread into the handguard, meaning you don’t use the back T-nut of the accessory. This allows the shooter’s rail to truly stay as slim as possible while still offering a variety of mounting options. In addition to the PicLok handguard, the MK1 MOD 2-M line includes the Radian Raptor charging handle and Radian Talon safety selector.

11in_Mod2-M_Handguard_45

For PWS customers wanting to do a quick handguard swap, we have good news! Handguards will be available as standalone items, so you can easily swap your current PicMod to PicLok.

Alpha_11in_Rifle_45

The ALPHA line of rifles, easily differentiated by the FDE anodizing, was designed specifically for military use, but will be available for civilians. A few features of the ALPHA line are the heavier barrel profile, 1:7 barrel twist rate and gas adjustment knob in front of the handguard.

PCC16_Rifle_45

The last big release from PWS was the new PCC line in 9mm. Using a straight blowback system, taking GLOCK mags and having last round bolt hold open, PWS expects the PCC line to be a popular addition to their current offerings.

The PWS website is currently being rebuilt, but will be live by mid-February. In the meantime, customers can contact sales@primaryweapons.com for questions and purchasing.

Company Information:
Primary Weapons Systems (PWS) was formed in 2008 as a rifle component company and has since grown to be one of the largest firearms manufacturers in the Northwest. PWS initially made firearm accessories and compensators, but quickly moved into firearm manufacturing as they developed their PWS Long-Stroke Piston System which takes the operating system from Kalashnikov’s AK design and merges it with Stoner’s AR platform giving a hybrid rifle to shooters looking for a low-maintenance yet reliable and accurate firearm. PWS manufactures AR-15s in 223 Wylde, 300BLK and 7.62×39 as well as DPMS .308 pattern builds in both .308 Match and 6.5 Creedmoor- all with the long-stroke piston operating system. The PCC line of 9mm products is the only line that varies from the piston system, being a straight blowback system. Also manufactured by Primary Weapons Systems are lightweight buffer tubes, steel body buffers, accessories and a wide selection of compensators for firearms both piston driven and direct impingement.

primaryweapons.com/store

SPARTANAT – Andres Industries AG is bringing Diamond Age to Europe

Monday, February 5th, 2018

Diamond-Age-759x500

Andres Industries AG, hitherto known for its highly innovative thermal imaging systems (TIMRO-X, TILO-3 see SPARTANAT Review), starts a cooperation with the US company Diamond Age for the development of ballistic protection systems and takes over its European distribution. Diamond Age has been intensively involved in the development of new materials for many years and specializes in the production of high-performance ceramics for armour-plating.

At the IWA and EnforceTac in March, the company will be presenting the BASTION helmet it announced last year. This is characterized by an unequaled bullet-resistance up to the range of rifles (VPAM 7). Although thin special panels are used for this purpose, the total weight of the helmet remains below 1.9kg, i. e. it weighs no more than a normal fragment protection helmet.

Diamond-Age-3

But even without the additional VPAM-7 panels, the helmet achieves the protection class VPAM 3 with a lower weight of only approx. 930g (shell weight). In the lightest combat-ready version, the helmet weighs only 1.15kg. Another special feature is the very low back face deformation of only one centimeter (0.39″) when firing handgun ammunition (NIJ Level IIIa). This extremely low value will become increasingly important in the future, as recent studies show that it is often not enough to stop projectiles. It is equally important that the depression on the helmet caused by the projectile does not lead to a serious skull injury.

Diamind-Age-2

Commenting on the new cooperation with Diamond Age, Andres Industries AG CEO, Björn Andres, said “For over a year we have been working intensively on ballistic protection systems and have built up a successful new business line. Most manufacturers, and we too, have so far been working mainly on new techniques to process existing materials better and better. We have found that we need to work more closely with developers of such materials because we need new and even better materials. With Diamond Age we have found such a partner. Where others stop at boron carbide, Diamond Age is just beginning.”

Andres Industries und Diamond Age auf den Messen in Nürnberg
 
EnforceTac from 7-8. March 2017 Hall 10 – 614
IWA vom 9-12. March Hall 9 – 405
Mehr Messe unter: www.nuernbergmesse.de/sicherheit
ANDRES INDUSTRIES:  www.andres-industries-shop.de
DIAMOND AGE: diamondage.org
SPARTANAT: www.spartanat.com