Wilcox Ind

Archive for the ‘Advertiser’ Category

The Ghost Robotics Vision-60 As ISR Platform

Wednesday, September 20th, 2023

A lot has been made of the weaponization of ground robots. Much of it is is due to our fascination with science fiction. No sooner is an image shared online like the one above of a robot armed with a machine gun than the comments about “Skynet” and “Terminators” kick in. But what is lost on most is why we developed robots in the first place. It wasn’t to deliver a lethal effect; there are lots of ways to make that happen. Robots were created as helpers, in order to remove humans from environments which might endanger them.

We’ve also got to accept a truth which is lost on many. The robot isn’t the capability, it’s the vehicle which delivers the capability. We desire effect and that requires various capabilities which come in the form of payloads. What makes various types of robots more desirable over others is how they deliver the payload to the right place, at the right time, to have the right effect. We use robots to reduce risk, particularly to humans.

Take for instance this image from last week’s DSEI show in London. We see a Ghost Robotics Vision 60 Quadraped – Unmanned Ground Vehicle carrying another robot, in this case an unmanned aerial system configured for an Intelligence, Surveillance and Reconnaissance role. This combination may be perfect, depending on the operational environment. It may be highly lethal to humans and require close access to the target of the surveillance.

To be sure, there are definite reasons to weaponize ground robots. They can be used in overwatch for example, or to guard perimeters. But in each case, they are desirable in these roles because they take a human out of a threat environment. Recently, the US Army stated that it wants to place a Next Generation Squad Weapon XM7 rifle, firing the new 6.8mm cartridge on a Vision 60 Q-UGV. There are technical challenges which a couple of commercial companies have worked through, but it can be done. The question is, “why?” What effect do they believe it will provide? Is it the right payload for that platform?

During the Robotics track of next week’s NDIA sponsored Future Forces Capabilities event in Huntsville, Alabama, you’ll see a lot of talk of various means to weaponize robots. It makes sense considering the event evolved from annual small arms and armaments meetings. However, we need more participation from the ISR community in this event.

The air side of unmanned systems has taken the opposite path. Long dominated by collection activities, they’ve only more recently integrated kinetic weapons delivery to their repertoire.

I believe the best use of at least the smaller classes of ground robots is as platforms for various sensors, including ISR, CBRN and as comms relay nodes for these and others. Persistent access to items of intelligence value puts operators at risk. What’s more, the task is time consuming and boring. a human’s efforts are best spent elsewhere, like considering how to use the data being vacuumed by a multitude of robots fitted witg various collection payloads.

As a former SIGINTer and Intelligence officer I’ve been thinking a lot about how to use ground robots for ISR. There is a lot of synergy to be had between the air, subsurface (maritime), and ground robotics communities when it comes to payloads. We need more interest from the developers of sensors in utilizing ground robots of various classes as platforms and cross talk between the various warfighter communities.

Robots are coming to the battlespace. It’s up to us to determine how to best use them. Some will be armed and some will conduct ISR. Others will serve as logistics enablers and communications nodes.

We need to brainstorm ways to get the most out of our investment in ground-based unmanned systems. Soon, I’ll share a concept I’ve come up with to use Vision 60 Q-UGVs to access challenging terrain and environments to conduct Multi-Int persistent ground surveillance.

-Eric Graves

Editor

215 Gear – Sniper Attachment Platform

Tuesday, September 19th, 2023

Designed as an ecosystem for the Sniper or Observer, providing versatility in mounting and configuration options. As your needs change, the system will provide mounting solutions to ensure your application end state is met. Machined with a monolithic, full width Arca Swiss rail for mounting to a RRS tripod head.

Additionally, 21 mounting holes are added for our 1/4-20 Optic Mounting Screws; with 16 M-LOK compatible channels. These channels are for mounting M-LOK compatible accessories, such as Picatinny mounting rails and specialty accessories. You can configure from a Shooting Bag platform to mounting optics, laser range finders or lasers in minutes. We are expanding accessories for this platform, based on current and future mission requirements.

Includes: 6061 Aluminum Adaptor Plate

Does not include: Installation tools or 1/4-20×3/8” screws.

Additional accessories for purchase:

1/4-20×3/8”screws for mounting your item to the Sniper Attachment Plate.

Made in the U.S.A with 100% U.S.A 6061 Aircraft Grade Aluminum.

Anodized matte FDE or Black.

Product total weight: 5 7/8 oz.

Product dimensions: 8.5”L x 4”W x 0.5”H

www.215gearstore.com/sniperattachmentplatform

SIG SAUER Raises Over $120,000 for Honored American Veterans Afield (HAVA) at Annual Charity Golf Tournament

Friday, September 15th, 2023

NEWINGTON, N.H., (September 14, 2023) – SIG SAUER, Inc. is pleased to announce the 7th Annual SIG SAUER Charity Golf Tournament raised over $120,000 for Honored American Veterans Afield (HAVA).  The tournament held in August at Pease Golf Course in Newington, New Hampshire is an annual event hosted by SIG SAUER in support of the HAVA organization.

“This signature HAVA event is made possible through the overwhelming generosity of individuals, organizations, supporters, and industry partners.  Since the events founding, the SIG organizing committee has raised close to $500,000 and countless volunteer hours,” said Tom Taylor, Chief Marketing Officer and Executive Vice President, SIG SAUER Inc.  “One hundred percent of this funding goes directly towards expanding the HAVA programming through shooting events and hunting, and in support of the HAVA mission to re-integrate disabled veterans and injured military back into normal life.”

HAVA is a 501(c)3 organization founded in 2007 by a group of executives from the hunting and shooting industry to help disabled veterans and injured active-duty military returning from war heal and reintegrate back into everyday life through participation in outdoor activities. HAVA sponsors guided hunts, shooting events, and outdoor activities across the country hosting hundreds of veterans annually.

SIG SAUER is a longstanding supporter and sustaining sponsor of HAVA. Annually, SIG SAUER participates in HAVA sponsored shooting and hunting events across the country benefiting hundreds of veterans, including the upcoming flagship San Antonio Police Department HAVA Family Day at the SAPD Training Facility on November 4, 2023.

To learn more about the HAVA organization visit honoredveterans.org.

FirstSpear Friday Focus – Tiger Stripe Wind Cheater

Friday, September 15th, 2023

A new take on a classic OG FirstSpear Wind Cheater. This American-made, Tiger Stripe Wind Cheater is the ultimate go-to jacket for anyone who is on the move. This jacket is designed with durable wind-resistant material that can withstand even the harshest weather conditions. The tiger stripe pattern not only adds a touch of badassery to your outfit, but it also serves as camouflage in the wilderness or urban jungle. Slip into this wind cheater and always be ready for whatever life throws your way. With its premium quality and practicality, this jacket is a no-brainer for anyone who values style and function.

Visit FirstSpear to find American Made kit and accessories, Built For The X.

L9 Manufacturing Announces Delivery of Rifle to Utah Highway Patrol

Thursday, September 14th, 2023

San Antonio, Texas – L9 Manufacturing proudly announces the successful delivery of 250 rifles to the Utah Highway Patrol, following a rigorous competitive bidding process.

We aim to be the trusted choice for the professional end-user and the community they serve by producing safe, reliable, and superior rifles tailored to their operational needs. Since 2014, L9 Mfg. has been dedicated to providing high-quality, American-made M4 and MK10 firearm platforms and accessories with proven craftsmanship and performance. As a leader in the firearms industry, L9 Mfg. instills confidence and trust in their clients through innovative design, extensive data collection, rigorous product testing, and accuracy. L9 Mfg. stands with the professional end-user by offering a lifetime warranty and a service promise to support and replace any issued firearm platform used in the line of duty.

“These rifles will enhance the Utah Highway Patrol’s public safety efforts. We’re honored to support the Utah Highway Patrol and are confident in these rifles’ value. We are committed to upholding the highest standard of quality and accountability through support and service.” ? L9 Mfg.

For more information, please visit:

www.L9Mfg.com

S.O.Tech Helmet Scrim

Thursday, September 14th, 2023

The new S.O.Tech Helmet Scrim is part of our new tactical line and can be found in our new 2023 tactical catalog. The Helmet Scrim is made up of laser cut pack cloth, making it lightweight, durable, and simple. It was made to add a layer of texture to help the user blend in with their surroundings and is cut in a way that helps you adjust to your helmet.

Our Helmet Scrim was made to be customizable, elastic draw cord runs all along laser cut holes that are located on the edge of the scrim. Everything is brought together by a cord lock, which helps secure the scrim over the helmet. Included in the kit are 8 ghillie strips that help add more texture to the scrim.

 

Our Helmet Scrim was made to be customizable, elastic draw cord runs all along laser cut holes that are located on the edge of the scrim. Everything is brought together by a cord lock, which helps secure the scrim over the helmet. Included in the kit are 8 ghillie strips that help add more texture to the scrim.

Kit Includes: Helmet Scrim, Shock Cord Plus Cord Lock, and 8 Ghillie Strips.

sotechtactical.com

MoD Signs Contract with Edgar Brothers for Alternative Individual Weapon System

Thursday, September 14th, 2023

Announced last week by the MoD, the contract for the Alternative Individual Weapon System was announced by the Ministry of Defence. The AIWS is a version of the KS-1 carbine in 5.56 NATO, manufactured by Knights Armament Co.

Yesterday, representatives from the British Army and Edgar Brothers signed a symbolic version of the contract.

Col Paul Cummings, Dismounted Close Combat Portfolio Leader and COL Stu Nasse, Field Army Representative, along with Mike Newman, Director, Edgar Brothers sign the contract for the L403A1 Alternative Individual Weapon System for the British Army and Royal Marines.

Nick Taylor, Head of Soldier Training and Special Projects receives a commemorative plaque on behalf of the Army from Matt Grundy Edgar Brothers Senior Manager.

The plaque, crafted from slate and reclaimed wood is part of the Social Value Model projects Edgar Brothers will undertake pursuant to this contract. It was crafted by Dan Earp-Jones a former Royal Marine.

Additionally, C. Reed Knight, Jr. and C. Reed Knight, III presented a bayonet to Nick Taylor, Head of Soldier Training and Special Projects.

Here is a photo of representatives from the government and industry team that made AIWS possible.

DSEI 23 – Gentex Updates FAST Bump Helmet

Wednesday, September 13th, 2023

Gentex has updated the FAST Bump Helmet. The biggest thing you’ll notice is that it no longer has a molded shroud to accommodate those conducting airborne operations. It has been replaced with the same Lightweight Modular Bungee Shroud as other helmets in the range. It also now features PowerPath ARC Rails which allow the user to route cables behind the rail to keep them out of the way.