Advertiser | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Advertiser’ Category

Unity Tactical Expands FAST Line with MRDS Mount and Improved Accessories

Tuesday, July 18th, 2023

New FAST™ MRDS and Updated FAST™ Modular Accessory Suite expand capabilities for shooters using micro red dot sights
BROUSSARD, LA. (July 18, 2023) – UNITY™ Tactical, a designer of components that integrate tactical systems and optimize the human factor, announced today the launch of its FAST™ MRDS mount, as well as additions to its FAST Modular Accessory Suite. These products all optimize the shooting experience and afford more configuration options when using micro red dot sights.

The FAST™ MRDS mount, in conjunction with any of the Optic Adapter Plates in the FAST™ Modular Accessory Suite, brings compatible micro red dot sights to the established FAST™ height of 2.26″ to the optical centerline.

The FAST™ Modular Accessory Suite, which has previously included four Optic Adapter Plates and an Offset Optic Base that mounts secondary optics at 36 degrees, now also boasts two additional Optic Adapter Plates for micro red dot sights with Holosun™ 509T, Holosun™ K and Shield™ RMSc footprints.

Updates to the FAST™ Modular Accessory Suite now also allow mounting in conjunction with an EOTech® when mounted on a FAST™ Optic Riser, which previous models did not.

An MRDS Top Ring for the FAST LPVO also joins the accessory suite, attaching any number of micro red dot sights directly to the top of the LPVO scope mount. When used with a FAST Optic Adapter Plate, the micro red dot will sit at the 12 o’clock position.

“We saw a gap for end users who want to mount micro red dots at the 12 o’clock position in combination with other optics, and we always aim to fill gaps when we see them,” said Mike Roth, VP of business development for UNITY Tactical. “The FAST MRDS and the FAST Modular Accessory Suite afford several configuration options, giving end users the flexibility and customization to mount primary and secondary optics in a variety of ways.”

FAST™ MRDS is available in black or FDE. It mounts directly to an M1913 rail and comes standard with a two cross bolt rail clamp, but is compatible for retrofit with a FAST™ QD Lever. It retails for $152.

The MRDS Top Ring for FAST LPVO is available in black or FDE and in 30mm or 34mm, and retails for $56. The FAST Offset Optic Base is available in black or FDE and retails for $69. All six FAST™ Optic Adapter Plates come in black and retail for $36.

Both the FAST MRDS and FAST Modular Accessory Suite offer a lifetime warranty, and are available for purchase now through authorized UNITY dealers and on UNITYtactical.com.

Posted in Advertiser, Optics, Outdooralamode, Press Release, Weapon Accessories | Comments Off on Unity Tactical Expands FAST Line with MRDS Mount and Improved Accessories

Reptilia RECC·E A5/SR25 Carbine Stock Now Shipping!

Friday, July 14th, 2023

It’s finally here: the Reptilia RECC•E Carbine Stock for A5/SR25 buffer systems!

The RECC•E Stock for A5/SR25 is now shipping to all dealers, distributors, and direct to customers on our website. Inventory is limited, so make sure to sign up for our email notifications if you miss the drop and we’ll shoot you a reminder next time these and our most popular products are back in stock!

As with all Reptilia products, the RECC•E is 100% designed and manufactured in the USA, and features a full lifetime warranty against manufacturer defects.

Product Description:

Designed at the request of a military end user, the RECC·E Stock features a constant cheek weld, ambidextrous QD sling attachment points, rubber buttpad, and a modular design that allows usage of a standard AR15 carbine buffer system, or A5/SR25 carbine buffer system by replacing the receiver extension (buffer tube) and forward portion of the stock. Weighing only 12.0 ounces including the proprietary AR15-length receiver extension, the RECC·E stock is the ideal lightweight solution for the entire spectrum of AR-pattern guns from compact to precision.

Technical Specifications:

• Receiver Extension: 7075-T6 Aluminum, Type III Milspec Anodized Finish

• Materials: Impact Modified Glass-Filled Nylon Polymer, 7075 Type III anodized aluminum, Nitrided alloy steel hardware

• Weight (A5/SR25): 12.8 oz.

• Length of Pull (A5/SR25): 12.375 in. – 15.0 in.

• Patents Pending

• MADE IN USA

Click here to buy now.

Posted in Advertiser, Weapon Accessories | 2 Comments »

FirstSpear Friday Focus – American Skull T-Shirt

Friday, July 14th, 2023

Check out our New American Skull T-Shirt – guaranteed to make heads turn! Crafted from a quality cotton-polyester mix, this bad boy offers a solid fit and ultimate comfort. It’s the envy-inducing statement all American’s should strive for. So, grab our American Skull T-Shirt and get ready to be the talk of the town. While supplies last.

Visit FirstSpear to find American Made kit and accessories, Built For The X.

Posted in Advertiser, Clothing, FS Friday Focus, Guest Post | Comments Off on FirstSpear Friday Focus – American Skull T-Shirt

Ten-Speed 6-Pack Bandolier from Blue Force Gear

Thursday, July 13th, 2023

The BFG Ten-Speed 6-Pack Bandolier combines the inherent retention of the Ten-Speed construction with the convenience of a bandoleer which accommodates up to six M4 (or similar) magazines or other items.

Featuring adjustable shoulder and waist straps, it’s great for use on its own as a hasty load carriage system, or as a handy means of resupply.

Offered in Black, Coyote, and MultiCam.

www.blueforcegear.com/ten-speed-m4-6-pack-bandolier

Posted in Advertiser, Load Carrying | Comments Off on Ten-Speed 6-Pack Bandolier from Blue Force Gear

Introducing The S.O.Tech Tactical Evacuation Pack

Wednesday, July 12th, 2023

The Tactical Evacuation Pack is a lightweight compressible bag that zips into a small pack that mounts to the belt or upper rear plate carrier and unzips to expose a full size backpack to quickly accept raid evidence or high value items of a wounded soldier for air evacuation.

The durable but ultralight nylon zippered backpack accepts a plate carrier and gun belt with pouches and a helmet with radios to secure a wounded soldier’s high value items. It can also accept laptops, files and media during sensitive site exploitation. At 17” high x 14” wide x 9 “ depth this a substantially sized pack. The pack is also ideal to function in escape and evasion foraging bag in SERE mode. Zippered closure provides positive control of contents and webbing shoulder straps and pull handle facilitate control during movement.

When closed, the small rectangular pouch presents a zippered pouch to hold an optional evacuation marking, lighting and tagging kit as well as a patients face mask. This can be worn on a belt using the Flex Tab MOLLE compatible loops forming a belt pouch that expands into a pack. However, the intended mounting places the closed pack at the top of the rear plate carrier attaching via the Flex Tab MOLLE system or the top of a pack. The small pouch is accessible while main pack is zippered closed.

When unzipped the expanded pack can be worn while MOLLE mounted to the plate carrier, or it can be quickly unfastened and worn like a regular pack using the shoulder straps. Note that when the pouch is kept attached to the vest, the backpack straps can stay inside the pack, or they can pull the body of the pack forward by pulling the shoulder straps onto the shoulders. So when carrying the pack independently, the weight is shared between the shoulders and the point of MOLLE fastening to the upper rear plate carrier. When mounted on the tope of a pack, it can be expanded to carry light loads for a short distance (such as bandages and dressings). Made of 200 denier Cordura nylon in OCP camouflage but also available in tan and black.

sotechtactical.com/products/evacpack

Posted in Advertiser, Packs, Press Release | 3 Comments »

Sneak Peek – Emissary Development Alternator

Wednesday, July 12th, 2023

Emissary Development’s Alternator addresses some of the shortcomings of using two illumination and/or laser aiming devices at the same time.

The design of the Alternator is simply a housing that clamps over two existing Unity Modbutton Lite switches. It has its own actuation surface that sits above the switches and features three pads that use different textures and their own unique angle to make it easier to differentiate each pad from another.

The forward and rearward pads fire off the switch directly underneath them but the middle pad will activate both switches simultaneously.

It also features a fully fenced off body that helps prevent accidental activation of the switches.

They plan to offer two different versions, a “standard fence” and a “raised fence” variant.

The standard fence has the activation buttons flush with the surrounding protective barrier (designed to prevent unwanted activation) of the housing. This will be the most comfortable and lowest profile version.

The raised fence, as it’s name implies, has a slightly raised protective barrier for those looking for a bit more added insurance against the possibility of unwanted activation of the buttons. Keep in mind this model stands slightly taller on the rail that the standard model.

Both versions are designed to prevent AD/NDs so while there really isn’t a massive difference between them they wanted to offer options that the end user can select which model fits their needs best.

emissarydevelopment.com

Posted in Advertiser, Lights, Weapon Accessories | Comments Off on Sneak Peek – Emissary Development Alternator

Parry Labs Receives $38 Million Award for Electronic Warfare System

Tuesday, July 11th, 2023

ALEXANDRIA, Va., July 10, 2023 — ADS Inc. has been awarded a delivery order by DLA Troop Support on behalf of the U.S Army for production of a system to support the safety and security of our troops against modern improvised explosions and electromagnetic threats. The hardware to fulfill the $38 million delivery order will be produced by ADS’s sub-contractor, Parry Labs LLC in Columbia, Maryland.

The expeditionary ultra broadband, man-portable jammer is designed specifically for utilization by certified bomb technicians and enhances soldier lethality through protection and sustainment of operations. This next-generation electronic countermeasures capability “jams” radio frequencies thereby reducing the vulnerability of Explosive Ordnance Disposal (EOD) soldiers to the latest Remote Controlled IED (RCIED) threats, which often result in critical injury or death. Development, transition, and fielding of this system will enhance the warfighter’s ability to safely conduct operations and help ensure US forces remain dominant on the battlefield of the future.

“Parry is proud to support the Army and the wider EOD community with this next generation electronic warfare system,” said CEO John Parkes. “Our solution provides capabilities needed by EOD teams to maintain freedom of maneuver and secure lines of communications.”

First delivery of the electronic warfare devices is planned for the early part of FY2024.

Posted in Advertiser, Contracts, EOD, EW, Press Release | Comments Off on Parry Labs Receives $38 Million Award for Electronic Warfare System

Thyrm Switchback

Monday, July 10th, 2023

I’ve found that once in awhile it’s good to reintroduce older products to the SSD readership as there are constantly new readers coming on board.

The Switchback is a flashlight accessory which screws a retention ring into place between the body and tail cap. It has become a mainstay of the Thyrm line and expanded over time to five different models which will fit most popular handheld lights.

• The now defunct SwitchBack Large was the original SwitchBack Large, compatible with many 1-inch diameter lights.

•SwitchBack Large 2.0 is the newest version of the Large SwitchBack, compatible with even more 1-inch diameter lights and with several improved features.

•SwitchBack DF is an extra-large flashlight ring that is compatible with Surefire Dual Fuel handheld lights and Pelican 7600 flashlights.

•SwitchBack HOG is an extra-extra-large flashlight ring that is compatible with the Modlite HOG handheld light.

•SwitchBack S Backup is a smaller flashlight ring that is compatible with most Surefire “EDC” and legacy Backup lights.

Many appreciate the versatility the SwitchBack adds to handheld lights by aiding retention, but the most common criticism I hear is from people who have never actually tried one.

They either rely soley on a weapon mounted light, which means they’ve got to expose their pistol and point it at things they might not want to point a weapon at, or they see others use a modified shooting grip with the flashlight and declare that they don’t shoot that way.

Got it. I don’t either. But I do like to know that I’m not going to accidentally drop my light while I’m using it.

For those of you who do shoot that way, SwitchBack makes it much easier to establish and maintain a solid grip on your light.

Check the SwitchBack out and get 10% off by visiting thyrm.com/soldier-systems.

Posted in Advertiser, Lights | Comments Off on Thyrm Switchback