Celebrate 20 years of the TLR-1

Archive for the ‘Advertiser’ Category

American Rheinmetall Systems – MK93 Mount Upgrade

Tuesday, September 22nd, 2020

American Rheinmetall Systems’ upgraded MK93 Mount decreases the system’s weight, improves weapon handling by soft mounting both MK19 and M2A1 weapons and provides advanced ergonomics with the introduction of a breakaway shoulder bar and trigger mechanism.

Benefits:

-Quick and easy weapon mounting and interchange by a single user

-Reduced recoil improves accuracy and first round hit probability

-Minimized load on supporting platforms

-Increased multi-target engagement due to

-Improved weapon stability and ergonomics

Features:

-Weapon mounting positions – both MK19 and M2A1 are secured to the rear of the mount with a single pin

-Recoil dampening – soft mounts both MK19 and M2A1 weapons

-Breakaway shoulder bar & trigger mechanism – improves weapon control and ergonomics

SIG SAUER – M18 M18 X-CONVERSION Kit

Tuesday, September 22nd, 2020

During the Modern Day Marine virtual expo, SIG gave us a sneak peek at their new M18 X-CONVERSION Kit.

The 9mm M17/18 Modular Handgun System manufactured by SIG SAUER is the most versatile pistol the US military has ever fielded. SIG got it right when the Army said they wanted a modular pistol.

The kit, which can be used at the unit level, includes a black SIG SAUER X-SERIES grip module with extended beavertail, deep trigger undercut, enhanced magwell that’s grip weight compatible, and a fastback style grip.  The kit also includes an X-SERIES flat trigger and two (2) 15-round magazines.

Both the Marines and Air Force are fielding the more compact M18 variant of MHS along with SOCOM, to replace their M9 sidearms.

WL Gore & Assoc – Gore Signature Management

Tuesday, September 22nd, 2020

It’s great to see WL Gore showing their Signature Management technology again. They initially brought it out a few years ago but were probably leaning too far in the foxhole. DoD was focused on other issues at the time. But with increased focus on China and Russia, the threats become much more sophisticated.

Gore offers true multispectral signature management. I’ve seen earlier versions in action. Based on the way they have presented their data at the ongoing virtual Modern Day Marine expo, they are updating the technology to focus on new threats which include vis, nIR and SWIR mitigation.

As far as most service members are concerned, WL Gore is synonymous with wet weather protection. That’s where they’ll really shine. With limited numbers of Gore multispectral concealment systems fielded over the years, they’ve proven they are are capable of integrating multispectral camouflage into durable wet weather breathable outwear and FR uniforms,

MATBOCK Monday – Kodiak Releasable Dog Leash

Monday, September 21st, 2020

Good morning and Happy MATBOCK Monday!

KODIAK Releasable Dog – (KRD) Leash

A 43” dog leash made from MILSPEC MultiCam webbing and stitched with KEVLAR thread to maximize durability and resist salt water & sun corrosion. The KRD leash has an ergonomically designed quick release buckle which allows the handler to release the dog from the end of the leash vice unclasping the leash at the collar. The leash features a quick disconnect that can be girth hitched to the belt as well as a standard clasp for secure dog attachment when the remote release is not required.

The KRD leash also doubles as a sling to be used with the MATBOCK Dog Litter allowing the handler to carry out an injured dog or even the added ability to hoist.

Quick Release!

Don’t forget to tune in Monday at 1:00 PM EST as we go live to demo the Kodiak Releasable Dog Leash!

www.gsaadvantage.gov/advantage/ws/catalog/product_detail?gsin=11000074649578

SCUBAPRO Sunday – Finning Techniques

Sunday, September 20th, 2020

Finning is the process of generating propulsion. In that sense, it is probably the most basic of all the diving skills, and one that most of us are already able to do when we first start diving.

In particular, a better finning technique, choosing the right technique for the right circumstances, can increase your dive’s efficiency.

This will decrease your air consumption, reduce physical fatigue, and extending your dives. Picking the right finning technique will also decrease the amount of silt you turn up. I am going to talk about four types of SCUBAPRO fins. The Jet fin, the Seawing Nova Gorilla, The Seawing Nova, and the Go Sport fins. The Jet Fin is the most wildly used fin in the world by profession divers, the SeaWing Nova, the SeaWing Nova Gorillas (a stiffer version of the Seawing Nova that is great for people that who are strong kickers). The Go Sport fin is new to our line and is a tremendous all-around fin for diving, surface swimming like OTB and River and Stream crossing. Lastly are the Twin Jet fins, again a SCUBAPRO iconic fin; it is used by strong kickers that like to use a flutter kick type stroke.

There are three main fin kicks that any diver should know. These are flutter kicks, frog kicks, and bent-knee cave diver kicks.

Flutter kicks

The flutter kick is the basic finning technique that most divers use. This technique is similar to the leg part of freestyle swimming.

Watch 90 percent of all divers, and you’ll see them use flutter kicks. In the early days of diving, it was the only technique taught. The reason for its popularity is quite simply that it is the strongest of all the kicking techniques, and it generates a lot of propulsion. Back in the early days of diving, before the invention of the BCD, speed was the primary way of maintaining buoyancy. The advantage of this kick is the forcefulness of it. It is excellent for moving at high speed or when fighting a current. The legs’ vertical up-down movement also means it is beneficial for wall diving, mainly when diving by a wall covered in corals. There’s less risk of kicking something on the side of you like your dive buddy, coral or the finning’s backwash, stirring up sediment. The disadvantages of this kick are related to the advantages. The forcefulness of the kick means that it is relatively strenuous and increases air consumption because of it. The vertical movement can steer up a lot of silt; this is bad for many reasons. If you are on a combat swimmer operation, the trail of silt can give you away. Second, it will make it hard for anyone following you to see their gauges and find the target. (unless you are using the SCUBAPRO HUD dive computer) (shameless plug, but it is excellent for low visibility). In confined spaces like close to the target around the piers or in a cave, it can cause a blackout and make it very hard to see what you are doing.

A fast, powerful technique is useful when fighting a current, for short bursts of speed. The best fins for this are the SCUBAPRO SeaWing Nova Gorillas, The Go Sports, and the Jet fans.

Frog kick

The frog kick looks very similar to the leg portion of the breaststroke from swimming. A large and wide kick that utilizes the leg’s full strength is a good, general technique for open-water diving, either in the water column or close to the bottom. Because the movement and propulsion aren’t continuous, good buoyancy technique is required, though.

The movement here is horizontal, or close to it, meaning that there is minimal disturbance of the bottom when swimming close to the bottom, which will maintain the visibility for any divers that come after you. However, the kick’s width means that the kick isn’t recommended for caves or when diving close to a wall.

This kick, combined with good buoyancy, will quickly become your go-to technique once you get used to it, and will likely decrease your air consumption significantly. The more adequately trimmed your position in the water, and the more you take advantage of the gliding phase before initiating the next kick, the more you’ll reduce your energy (and air) consumption.

The powerful kick that can be extremely efficient, especially if you master the kick-and-glide aspect. Suitable for open-water diving in mild currents, in the water column, or close to the bottom. Not advisable in stronger currents or close to walls.

The best fins for this are the Jet fins.

Bent-Knee Cave Diver Kick

With the complicated name, this technique is the go-to technique for technical divers and is the one that causes the least disturbance of the environment. The bent knees mean that the movement is minimal, with the entire kick coming only from a small movement in the hips, combined with a kick of the ankles. This means that propulsion is limited, compared to the two kicks above, but it also decreases strain and air consumption.

The small movement means that it works well in cramped areas, such as inside wrecks and caves, and, when executed correctly, can minimize the amount of silt kicked up to almost nothing. For this reason, it is also the recommended technique for diving close a very silty bottom, like in a confined space, close to piers or around ships.

The slow movement also means that this technique helps you slow down, making it useful for muck dives or other nature dives where you’ll be looking for small animal life. Because it is a very low-propulsion kick, this technique has its limitation when swimming against a current, though. This is a minimal-impact kick that is ideal for cramped environments and close to very silty bottoms, as well as helping you slow down during your dives and maximize your available air. The Jet Fin is the best fin this, and with some practice, the Go Sport is good also.

Lastly, the SeaWing Nova Gorillas come in OD Green or Orange, but they can be special ordered in all black. You can also order the SeaWing Nova in all black. Special orders require a minimum of 24 per size, but we can work to get you want you need.

Contact ecrazz@clannfive.com for more information.

Vertx and Point6 Team Up to Create Something Special

Friday, September 18th, 2020

Sock Collaboration Broadens Range of VaporCore™ Line

Cincinnati, Ohio – Vertx®, a leading manufacturer of low-profile tactical apparel and accessories, is excited to announce their collaboration with Point6® on two new VaporCore™ Crew Socks. Constructed using a unique blend of 37.5® Nylon and Merino wool, the VaporCore™ Crew Socks provide unmatched moisture and temperature management. Offered in both 5” and 10” cuts, the socks are now available online at vertx.com and in-store. Customers can find their nearest dealer using the Vertx® store locator at vertx.com/store-locator.

“Socks are new territory for Vertx®, so we knew we needed a strong partner to bring our vision to life,” said Denny Bogard, GM/VP of Vertx. “Collaborating with Point6® was an absolute no-brainer. Their products are known as some of the best in the industry and are used by the world’s most elite operators. We couldn’t be happier with how the VaporCore™ Crew Socks fit and perform.”

Part of the expanding line of VaporeCore™ products, the Crew Socks are designed to maximize the benefits of both Merino wool and 37.5® fabric technology. A natural temperature-regulator, Merino’s structure both traps moisture and expands/contracts based on the weather. On top of that, 37.5® particles attract sweat vapor away from the skin and absorb the body’s natural infrared (IR) light, either sending it back when you’re cold or releasing it when you’re hot. Together, Merino and 37.5® Technology are actively working with you, your activity level and your environment to keep you comfortable, dry and odor-free. And unlike standard ring spun yarns, Point6® uses compact spun yarns that are 25% more durable and have fewer loose ends. Leaving you with an ultra-soft, ultra-tough sock with reduced pilling and itch. Learn more about the VaporCore™ Crew Socks and the rest of the Vertx® line of VaporCore™ products at vertx.com

TNVC Contributes $50,000 to Reward for Arrest of Gunman in LA County SO Ambush

Friday, September 18th, 2020

Redlands, CA, September 18, 2020

With a heavy heart and prayers for the victims and families of those involved, TNVC President and CEO Victor DiCosola has announced that TNVC has donated $50,000 to the reward offered by Los Angeles County for information leading to the arrest of the gunman who callously ambushed and attempted to murder two Los Angeles County Sheriff’s Deputies in cold blood on the evening of Saturday, September 12, 2020.

“With our headquarters in Southern California, TNVC has always maintained a close relationship with nearby Law Enforcement agencies,” said CEO Victor DiCosola, himself a former Southern California law enforcement officer.

“We are deeply saddened and also angry about this brazen and cold-blooded attack, and want to do everything in our power to help bring the perpetrator of this inhuman act to justice, and to support the families of those two deputies and their families. TNVC has always been committed to our Law Enforcement and First Responders, and everyone else who puts their own lives on the line to protect others, and many of our staff are military or law enforcement veterans. This one hits close to home in more ways than one, as does the seemingly random and vicious nature of the attack.

“It has been an extremely difficult and divisive time for our Nation over the last few months, however no matter what your political or ideological beliefs, I hope that we can all agree that such a brutal attack on fellow Americans who have sworn to protect and serve the public is reprehensible and unacceptable. For this reason, TNVC has donated $50,000 to contribute towards the reward to bring the perpetrator of this heinous act to justice.”

HSGI Boosts Manufacturing and Footprint to Increase Production & Decrease Lead Times

Friday, September 18th, 2020

SWANSBORO, N.C., Sept. 18, 2020 – High Speed Gear® kicked off a second manufacturing shift at its Swansboro, N.C., headquarters on Sept. 8 to increase production and meet the growing demand for its American-made gear.

Within the facility, HSGI® increased its overall headcount, as well as continued to invest in equipment and new technology. The company is also working with multiple county officials to stand up another facility to further expand production.

“The High Speed Gear brand has grown substantially over the last six years and we have experienced a significantly higher level of demand since July of last year”, explained Bill Babboni, HSGI Vice President of Sales and Operations. “Though we’ve increased our manpower and capabilities, we’ve also faced the same challenges this year as the rest of the industry, and we will continue to stride forward each day.”

High Speed Gear has a history of producing some of the most versatile tactical pouches & platforms in the industry. A proven performer, HSGI continues to show tremendous popularity in the law enforcement, military & shooting sports markets worldwide. HSGI’s lengthy list of top tier operators includes U.S. & allied special forces, state & local tactical units, & federal agencies. All HSGI products are Berry Compliant.

www.highspeedgear.com