Advertiser | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Advertiser’ Category

The Raine Bridger – Seeking Companies to License & Integrate

Thursday, January 17th, 2019

A solution to the gap & unusable space created from using FirstSpear® Tubes™ and similar quick release buckles.

Gain back the valuable real-estate lost, with added benefits.

Raine is looking for companies that are interested in incorporating the Bridger into their vests, plate carriers, chest rigs, and gear designs. Raine makes it an easy button solution to integrate the Bridger through licensing or OEM manufacturing for your products at the Raine factory. The Raine team can help integrate the Bridger with your existing products or assist in developing new ones.

The Bridger can be built to work with Firstspear® Tubes™, National Molding/Duraflex Taktic Buckles, ROC buckles, and other similar release buckle solutions.

Visit the Raine team at SHOT Show to discuss your project and for a Bridger demonstration.

Email the Raine team at bridger@rainetactical.com to schedule a meeting.

SHOT Show (Two Booth Locations)
• Supplier Show Case, Booth # S1318 (Mon – Tues)
• Main Floor, Booth # 20132 (Tues – Fri)

Cummerbund with Integrated Bridger preview:

Bridger Benefits & Features
• Adds back the MOLLE real-estate lost from using release buckles

(Bridges the Gap)
• Covers & protects the buckles
• Increases the service life of the buckles
• Increased protection from accidental quick release opening of the buckles
• LIFETIME WARRANTY
• Made in the USA

Raine is taking orders for the next production run of Bridger Covers compatible with FirstSpear® Tubes™ Vests and Plate Carriers.

You can purchase your Bridger Cover at: https://www.raineblack.com/the-bridger-molle-panel-2

A few are left in stock (Multicam and Coyote) with the next production run estimated to be ready in 4-6 weeks.

Disclaimer:

The Strandhögg plate carrier pictured is made by Firstspear, LLC. The Bridger™ products are made by Raine, Inc. Tubes™. FirstSpear®, Tubes™, 6/12™ and 6/9™ are trademarks of FirstSpear, LLC.

Bridger™ products are patent pending (US and International).

Posted in Advertiser, Armor, Press Release | 3 Comments »

See Grey Ghost At SHOT Show

Thursday, January 17th, 2019

Its that time of year again! This year we will have our own booth at SHOT Show, so you can get your hands on our new slide patterns, as well as our Combat Pistol and MKII rifle line! Booth 4366, hope to see you there!

Posted in Advertiser, SHOT Show | Comments Off on See Grey Ghost At SHOT Show

High Speed Gear and Company Showcase 8 New Products at SHOT Show

Thursday, January 17th, 2019

For Immediate Release – Swansboro NC –High Speed Gear® and company will be showcasing 8 new products at the Shooting Hunting Outdoor Tradeshow (SHOT) Show in Las Vegas, Nevada, January 22nd-25.

Displaying with Comp-Tac®, HSGI® and company will have a variety of products incorporating all customer groups to include; eV2 appendix holster and light bearing Warrior™ holster, Operator COBRA® belt, L.E. Blue Duty Gear, Kydex® Handcuff and Tourniquet TACO®s and a 247 Trauma ankle med wrap.

eV2™ AIWB Holster- The eV2™ is an inside the waistband holster deisgned for appendix carry. With the Comp-Tac Kick attachment this holster is the ultimate for deep concealment riding close into the body, grip and all.

Operator COBRA® 1.75” IDR Belt- A two belt system, The Operator COBRA® IDR 1.75” Rigger Belt is a low-profile shooter’s belt designed to work with both MOLLE and belt-mounted gear.

Kydex® Handcuff TACO®- Combining Kydex® and HSGI’s versatile TACO® design this handcuff holder will work with multiple size handcuffs while maintaining the look and functionality of other HSGI products.

L.E. Blue Duty Gear- The HSGI® Duty Line of products functions the same as the originals, but feature a sleeker front and hidden bungee, which is woven internally. Now available in the deep L.E. Blue this is an option for even more departments and agencies.

Kydex® Tourniquet TACO®- With a myriad of Tourniquet sizes and style on the market how do you hold them all securely and still effectively? The Kydex® and shockcord combination allow it to be done!

Canteen 1QT Pouch- This pouch is designed to fit one-quart canteens, such as standard-issue USGI canteens, as well as other items like stoves, MRE’s or multiple rifle magazines.

Warrior™ with Light Holster – The popular Warrior™ holster now includes even more light and firearm combinations with the additional upgrade of size adjustable HSGI® belt mounting clips.

247 Trauma Wrap – With 5 pockets and a neoprene pad / anti-slip guard, this medical ankle wrap is designed to carry essential supplies to stabilize a gunshot wound.

“For the past few months our teams, at both our Swansboro and Houston locations, have been working hard developing new products for all our customers. To kick off 2019, we are releasing 8 new products suited for the LE, MIL, Sport Shooter and Responsibly Armed Citizens. They, along with our full line of products, will be on display next week at Shot; and we are looking forward to seeing the reaction of our customers,” stated Bill Babboni VP of Sales and Operations. “These 8 products are just the beginning. With an additional new 11,000 square foot shipping facility opening in Swansboro this February and additional equipment and staff being deployed in Houston, the sky is the limit for what we will bring our customers in 2019.”

www.highspeedgear.com

Posted in Advertiser, Press Release, SHOT Show | 3 Comments »

Visit Chase Tactical At SHOT Show

Thursday, January 17th, 2019

Chase Tactical will be exhibiting at the 2019 SHOT Show. We’ll be located in Booth 31210 where we’ll have our new product line along with our Ballistic Armor product line. If you would like to set up a meeting with Chase Tactical we can be contacted at Sales@ChaseTactical.com

Posted in Advertiser, SHOT Show | 5 Comments »

TRUSPEC Introduces the New BDU Xtreme…Exclusively in A-TACS Camo

Thursday, January 17th, 2019

A-TACS Camo in partnership with TRU-SPEC introduce new uniform style with a deep connection to the history of SOCOM–paired exclusively with A-TACS Camo, the ultimate concealment solution.

Since the inception of modern Special Forces groups in the early 1950s, it was commonplace for many of them to modify the uniforms they wore to better suit the specifics of their mission criteria.

In keeping with that tradition at the beginning of the Global War On Terrorism, Special Forces groups began a new series of modifications to their existing Battle Dress and Desert Combat Uniforms. Chest and arm pockets were modified to enable easier access when wearing protective or load bearing gear as well as additional modifications required to make it easier to remove identifiable personal and unit information as needed. Noisy Velcro closures were replaced with buttons for stealth and easier repair in the field. A simpler, less restrictive uniform cut also made the uniforms more adaptable to rapidly changing mission objectives.

The new TRUSPEC BDU Xtreme (BDU-X) was developed in partnership with A-TACS Camo and was created with the input of Special Operations and Law Enforcement personnel. It is a hybrid uniform design and bridges the gap between the original BDU and the modern ACU uniform by incorporating many of the best features of both. Cut from soft yet durable 50/50 Vat Dyed NyCo that resists fading and shrinking these uniforms are built to perform.

Features:
-50/50 Vat-dyed colorfast NyCo ripstop for moisture wicking and breathability
-NIR Management built in to each garment

BDU-X Top Features:
-Slanted Shoulder pockets with button flap closures
-Velcro panels on pockets for Unit ID
-Two slanted upper chest pockets with button closures
-Front button closure
-Re-enforced elbows
-BDU style collar
-Wrist adjustment with button closure

BDU-X Combat Shirt Features:
-Slanted Shoulder pockets with button flap closures
-Velcro panels on pockets for Unit ID
-Torso cut from moisture wicking NyCo Blend
-Wrist adjustment with button closure
-Re-enforced elbows
-Quarter-zip collar design

BDU-X Pant Features:
-Two slanted cargo pockets with button flap closures
-Two rear pockets with button flap closures
-Two side slash pockets
-Oversized belt loops
-Front button closure
-Re-enforced knees and seat
-Blousing strings for adjustment at base of legs

A-TACS Camo…The Ultimate Concealment Solution–Enhanced

These new uniforms are available exclusively in the complete “X” series of camouflage patterns from A-TACS Camo, including New A-TACS AU-X and FG-X along with A-TACS iX and Ghost. Like the BDU-Xtreme, the “X” series of A-TACS Camo patterns was developed with the input of Special Operations personnel.

Mixing and matching camouflage patterns has also been an effective strategy for Special Operations throughout their long history of service. It is with that understanding that the new A-TACS AU-X and FG-X camo patterns along with A-TACS iX , are designed to mixed and matched with one another to further break the human silhouette for maximum levels of concealment in a wide variety of environments.

The “X” series of patterns utilize a shared common color palette with the ratio of brown and green tones altered between each of the respective patterns. This enables the end user to pair one set of Nylon Gear in the A-TACS iX (intermediate) pattern with either the FG-X (tropical), the AU-X (arid), or to utilize the iX pattern from head-to-toe in transitional terrain to easily maintain effective levels of concealment without changing over expensive nylon gear.

Simply put, the A-TACS Camo X Series is a complete concealment solution with infinite adaptability.

www.truspec.com

www.a-tacs.com

Posted in Advertiser, Camo, Clothing, Press Release | 5 Comments »

Magpul Introduces Grip, Mag Release and Magazine for the CZ Scorpion EVO 3

Wednesday, January 16th, 2019

Like many of you, I own a Scorpion and now I’m looking forward to updating some of the parts on my gun as well as magazines, with these new accessories from Magpul.

Magpul® MOE®-EVO Grip

The Magpul MOE-EVO Grip is an optimized drop-in upgrade to the CZ Scorpion EVO 3 family of pistols and carbines. Featuring an enhanced grip angle and Magpul’s proprietary TSP texture on contact surfaces, the MOE-EVO Grip gives users unsurpassed comfort, control, and durability. This lightweight and ergonomic grip builds on the legacy of Magpul’s MOE AR and AK grips to provide CZ Scorpion EVO 3 users positive control in all conditions, with or without gloves.

Features:
· Optimized grip angle allows enhanced control with short LOP stocks and pistol configurations, with and without a brace
· Aggressive TSP grip texture increases weapon retention in all environments and is substantially more durable than grip tape
· Ergonomic design mitigates fatigue and ensures ease of access to weapon controls while maintaining a secure grip
· High-strength injection-molded polymer construction
· Easily installs with a 3mm hex wrench
· Made in U.S.A., qualifying as one U.S.-made part for 922(r) compliance

Colors BLK

MSRP $24.95

Magpul® MOE®-EVO Enhanced Magazine Release

The Magpul MOE-EVO Enhanced Magazine Release includes advanced interface geometries and surface texture on the paddle and wings to allow easy, one-handed activation and magazine removal, while still remaining unobtrusive. It lets the shooter easily release the magazine and is accessible with the firing-hand index finger or the reloading-hand thumb.

The Magpul MOE-EVO Enhanced Magazine Release is a reliable, durable, and affordable drop-in upgrade to the CZ Scorpion EVO 3 family of pistols and carbines. The paddle design allows for easy, one-handed activation and magazine extraction, maximizing economy of movement.

Features:
• Increased surface area allows for better purchase and positive release activation while remaining low-profile
• Textured ridges and an easy-to-reach paddle allow ambidextrous use, with or without gloves
• Optimized lever angle for positive activation Durable, lightweight, high-strength polymer construction
• Installs easily with a 5/32″roll pin punch

Colors BLK

MSRP $24.95

Magpul® PMAG® 35 EV9™

The PMAG 35 EV9 is a lightweight, 35-round, 9x19mm CZ Scorpion EVO 3-compatible magazine. The PMAG 35 EV9 provides optimal round stack geometry, giving the large format pistol, PCC, and SMG market Magpul reliability and increased magazine capacity in a pistol caliber magazine. Features include advanced impact-resistant polymer construction, an easy to disassemble design, and a highly impact-resistant floor plate. Additionally, the PMAG 35 EV9 features a rounds remaining capability in the form of capacity indicator windows at 10, 20, 30, and 35-round intervals. A Paint Pen Dot Matrix is provided for magazine identification, and the ridged front and back strap on the magazine body provides a secure grip in all environmental conditions. The PMAG 35 EV9 provides the CZ Scorpion EVO 3 owner the design, reliability and durability expected from Magpul, all at a competitive price point.

Features:
· 35-Round Capacity with capacity indicator windows at 10, 20, 30, and 35-round intervals
Easy to disassemble design for cleaning
· High visibility follower
· Advanced impact resistant polymer construction
· Long life stainless steel spring for corrosion resistance
· Highly impact-resistant floor plate
· Paint Pen Dot Matrix for magazine identification

Made in the U.S.A., qualifying as one U.S.-made part for 922(r) compliance

Colors BLK

MSRP $19.95

www.magpul.com

Posted in Advertiser, Weapon Accessories | 15 Comments »

Will Petty Booth Appearance & Raffle at SHOT 2019

Wednesday, January 16th, 2019

59526907-A5A8-434E-91B3-E4B622149564

Fountain Valley, CA—SureFire will be hosting a Meet & Greet and giveaway with Will Petty of Centrifuge Training LLC at the SureFire booth #13968 on Tuesday 1/22/2019 from 1130a.m. to 1230p.m. Come by to meet Will, pick his brain on all things VCQB and get an exclusive poster. SureFire will be doing a raffle for new products at 12:15p.m. and tickets will be given out at the SureFire booth Welcome Desk between 8:30a.m. to 12:15p.m. on Tuesday.

Tags: Surefire
Posted in Advertiser, Press Release, SHOT Show | 1 Comment »

S&S Precision Navboard Flipmod

Wednesday, January 16th, 2019

The NavBoard™ FlipMod™ is the first of three navigation products from S&S Precision we’ll be showcasing before SHOT Show. It I ncludes a panel for a phone/tablet, with two additional panels for a compass and GPS/altimeter extending from the phone panel. The FlipMod™ configures to fit the user’s preference by changing the orientation and placement of the various panels using an adjustable friction hinge. It can be stowed close to the user’s body when in freefall or land navigation operations or deployed in an open position, and viewed in either a vertical or horizontal configuration.

www.sspgear.com/navgear

Posted in Advertiser, Parachuting | Comments Off on S&S Precision Navboard Flipmod