For 2018, Magpul has completely replaced their entire line of clothing. This new Every Day Clothing line is tighter than previous versions with just four shirts (long and short sleeve) and a pant. A couple of other pieces will follow in the Spring.
The first question everyone asks when they hear about Magpul clothing is, “why?” Magpul’s David Kramer explained it well, “It’s a natural extension of our firearms business, that we would build clothing that our community would be stoked to wear. Clothes that can be used for EDC, travel, road trips, and hard use. We build it to stand up to life.”
I wanted to know more. Why start over from scratch? I was told, “There are a variety of brands offering good options but often missing the mark in the sense of either representing our values, having the right features or even the right look. Many brands speak to a left leaning audience while other brands focus heavily on tactical where there was no one looking at the people who believe the Second Amendment in embedded into their daily lives. We need something for us, so we did something about it.” Granted, Magpul’s goal is to offer a quality apparel at a fair price, but this new take on clothing seems to spring from a deeper passion.
Like their earlier clothing, this is not made in the USA. Not at these prices. But, they are well made, hard wearing and good looking. I’ve seen samples. You’ll find iconic styles, with modern materials. Here’s a sneak peek, to whet your appetite.
Stateside Shirt
R&R Plaid Shirt
Weekender Chambray Shirt
Work Shirt
Reflex Pant
Be sure to check out the new line person at SHOT Show. You can also start purchasing now, on Magpul.com or at your favorite specialty retailer.
Fountain Valley, CA—SureFire, LLC, manufacturer of the world’s finest—and most innovative—illumination tools and tactical products, is proud to announce they will be exhibiting a plethora of lumens, at the 2018 NSSF SHOT Show in Las Vegas, Nevada. If you’re at odds with the dark, the SureFire booth is definitely the one place you need to visit at the show. SureFire will be displaying handgun weaponlights with 1,000 lumens, hand-held lights with 1,200 lumens, and long-gun weaponlights with 1,500 lumens! In addition to illumination tools, the SureFire Suppressors & Weapons Division will be launching brand new products at the show. To see the absolute best in illumination tools, suppressors, and tactical products, stop by the SureFire booth (#13968), located on the second level of the main hall of the Sands Expo Center during the 2018 NSSF SHOT Show, January 23– 26.
SureFire will be hosting a Meet & Greet with Will Petty of Centrifuge Training LLC at the SureFire booth #13968 on Wednesday 1/24/2018 at 1200PM. Come by to meet Will and pick his brain on all things gunfighting. SureFire will also be doing a raffle for new products at 12:45P. Tickets will be given out at the SureFire booth Welcome Desk between 10:00AM and 12:45PM on Wednesday.
Heading to the SHOT Show? Visit Darley Defense, booth #7003, to check out the latest innovations and technology. Our Defense product experts will be available to discuss equipment and procurement options best suited for your unique needs. We also have the capability to package products and/or services to assist with mission completion. If you are a manufacturer with a new or emerging military capability or technology, connect with a team member to discuss partnership opportunities. Darley Defense promotes our partners to the most relevant markets within our government network and provides the contract vehicle to facilitate the sale. We are committed to providing the best products and services and continually grow our partnership network with industry leaders. We invite you to be a part of this goal.
The Magpul® MS1 QDM Sling further enhances one of the most versatile line of rifle slings by including factory-installed Magpul QDM quick-disconnect swivels. As a heavy-duty replacement for the typical pushbutton swivel, the Magpul QDM offers an innovative low-profile design, single-handed manipulation, a superior corrosion-resistant Melonite® finish, and a high-strength, freely rotating bale that canalizes sling webbing to prevent rollover. This sling system not only provides the strength, speed and security of Magpul QDM hardware, but is also optimized for dedicated two-point sling functionality built around the streamlined MS1 Slider. Once set, this system allows for rapid adjustments to either lengthen or shorten the sling without slippage, tails, loops or other potential snag hazards. In a two-point role, the MS1 allows seamless shoulder transitions, fast adjustability for hands-free rifle carry and shooting support from various positions. The Magpul MS1 QDM Sling retains all of the original MS1 functionality and is fully adaptable for one-point applications with a series of adapters (sold separately) based on the MS3® and MS4® Slings.
In testing, the MS1 Sling survived tens of thousands of cycles in wet, dry and sandy conditions, static-load testing without slippage for 72 hours, and weighted six-foot dynamic drop tests. In addition to the controlled lab tests, we also swam with it, jumped with it, hunted with it, hiked into the mountains with it, and—most importantly—shot with it in a variety of rugged field conditions. The Magpul MS1 QDM Sling is made in the U.S.A. and is fully Berry Amendment compliant.
FEATURES
• Factory-installed Magpul QDMs constructed of Melonite® finished steel for strength and extreme resistance to wear and corrosion
• Dedicated two-point sling that can be configured for one-point functionality with optional adapters
• Secure and rapid length adjustment with MS1® Slider
• No tails, loops, or other potential snag hazards
• Lightweight, yet durable slider and buckle hardware made of reinforced engineering polymer
• Proprietary weave, 1-1/4” wide nylon webbing is strong and abrasion-resistant while tubular construction provides anti-chafing user comfort
• Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
Quickly reconfigurable between one-point and two-point operation, the Magpul® MS4 QDM Sling enhances the proven MS4 Dual QD Sling Gen2 by including factory-installed Magpul QDM quick-disconnect swivels. As a heavy-duty replacement for the typical push-button swivel, the Magpul QDM offers an innovative low-profile design, single-handed manipulation, a superior corrosion-resistant Melonite® finish, and a high-strength, freely rotating bale that canalizes sling webbing to prevent rollover. This sling system not only provides the strength, speed and security of Magpul QDM hardware, but also maintains compatibility with the standard QD sling cup interface found on many handguards, lower receivers, receiver end plates and buttstocks.
Based on the streamlined two-point MS1® Sling adjustment system, the Magpul MS4 QDM Sling retains the low-profile quick-adjust slider which minimizes bulk and allows for secure, yet effortless adjustment. Webbing length is optimized for a comfortable fit with all body types and body armor configurations.
The Magpul MS4 QDM Sling is made in the U.S.A. and is fully Berry Amendment compliant.
FEATURES
• Factory-installed Magpul QDMs allow rapid conversion between one and two-point configurations
• Swivels and D-Ring are constructed of Melonite® finished steel for strength and extreme resistance to wear and corrosion
• Secure and rapid length adjustment with MS1® Slider
• No tails, loops, or other potential snag hazards
• Lightweight, yet durable slider and buckle hardware made of reinforced engineering polymer
• Proprietary weave, 1-1/4” wide nylon webbing is strong and abrasion-resistant while tubular construction provides anti-chafing user comfort
• Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
Stop by U.S. Tactical Supply at SHOT Show in Booth # 20605 to see several new products.
The centerpiece is the Propper 4PV IIIA Vest they recently shot to failure at a recent ODOC Range demo. It stopped over 90 Rounds of Handgun Ammunition, including 44 Magnum, 357 Magnum, .40, 9MM & 38 Special.
Speaking of Protection, The Skeleton Optics SO7 Ballistic delivers the highest level of protection combined with visual clarity available in military grade eyewear today. With ZEISS IMPACTO material lenses and a matte black Z87+ MILSPEC frame, the SO7 meets the ballistic fragmentation impact standards of MIL-PRF-32432(GL) Ballistic Fragmentation – Class 1 and the high mass & high velocity impact requirements of ANSI Z87.1-2003/2010. Also available in clear lens.
They will also have a New Precision Quick Release Plate for the HOG Saddle Tripod Kits and a Brand new Quick Attach System for the HOG & PIG Saddle Rifle Rest that Allows you to instantly mount it to just about any Surface including ATV / UTV Racks or Tubular type structure. It will also Mount to Tables or similar Flat Surfaces with full range of motion when used in conjunction with a Ballhead.
U.S. TACTICAL SUPPLY SHOT SHOW BOOTH #20605! If you can’t make it to SHOT and have questions shoot them a quick e-mail sales@ustacticalsupply.com or call them. They still do it the old fashined way and answer the phone when you call! 541-928-8645
At Beyond Clothing®, we are focused on building outdoor clothing systems that are designed to withstand the harshest weather conditions in the world. We view our clothing systems as a toolset that has been optimized to keep our customers safe and comfortable during the most demanding expeditions. To continue to drive innovation in our product line, we’ve embarked on a global search to find the most technologically advanced fabrics and construction methods the world has to offer. After rigorous prototyping and development at our Seattle production facility, we are proud to introduce the Kyros™ collection.
The Kyros collection features the technical knowledge that we’ve established from years of building expedition-capable clothing systems with improvements in styling, fit and finish. Kyros will also feature a new proprietary waterproof fabric that we’ve developed in close collaboration with Cordura®. Our Lutra™ fabric is a 3L waterproof, breathable fabric that utilizes Cordura yarn to create a material that surpasses the tear strength of our competitors by nearly double. As well, each piece in the Kyros collection is completely compatible with the Axios system and can be used interchangeably as needed.
LUTRA FABRIC
We are proud to announce a new, proprietary waterproof fabric that we’ve developed in close collaboration with Cordura. Our Lutra fabric is a 3L waterproof breathable fabric that utilizes Cordura yarn to create a material that surpasses the tear strength of our competitors by nearly double. This fabric is designed to withstand abrasion while maintaining protection from the most extreme weather conditions.
Lutra is comprised of three layers: a 40D ripstop face fabric that utilizes Cordura yarn for increased durability, a 20D nylon tricot backing and a waterproof, breathable PTFE Membrane. This durable windproof and waterproof fabric will be featured in our upcoming Arx Rain Jacket and Pant from our Kyros collection. All clothing featuring our Lutra fabric will be fully seam sealed for maximum moisture protection.
“Beyond® has worked tirelessly with the U.S. supply chain to produce the most technical apparel possible given the shrinking industrial base. We are committed to expanding the quality and capability of our American Made collection, Axios. To do this, we have sought new technologies abroad in order to identify the best materials, production machinery and trims available. We are excited to present our new Kyros collection.
The Kyros collection will help test and identify global industrial capability with the intent of bringing those technologies back to the U.S. Ultimately, the goal of Beyond is to provide the best environmentally protective clothing systems in the world.”
Philadelphia, PA. – High Ground has announced the release of their NEW Summit 5 Pack at Shot Show 2018 into their family of packs/bags bringing one more excellent pack to their mission-specific line of tactical gear.
“The design of the High Ground NEW Summit 5 Pack based on critical information gathered during field testing and operator feedback, is designed to meet the evolving requirements of the battlefield,” stated Mike Runella, High Ground’s, Director of Business Development. He added “we already had a solid and successful pack (HG-5 Day) within our line, but we needed to attend to all the requirements expressed by operators we engaged.”
The NEW Summit 5 Pack features a lighter weight design, accessory exterior pouches placed closer to the end user for better weight distribution, new Volora padded shoulder straps with cable routing, new rain fly design, and easier access to the entire pack including the 117G mounting system. The NEW Summit 5 Pack also incorporates our HG Patented Quick Release Waist Belt System. Bob Rosania, CEO of Ehmke Manufacturing Company, fabricators of High Ground Gear, stated, “either innovate or perish. High Ground has seen significant increase in demand for our existing 3-Day and 5-Day Packs. The NEW Summit HG-5 Day Pack incorporates real-time design changes to further enhance the versatility of the pack.”
Stop by Booth 15166 at Shot Show 2018 for more of High Ground’s new bags, packs and medical kits.
