Duraflex Ghost Eye Hooks from National Molding are made right here in the USA and available in 3/4″ and 1″.
Archive for the ‘Advertiser’ Category
National Molding – Ghost Eye Hooks
Friday, August 26th, 2016Magpul Has Some Cool Leather Patches
Friday, August 26th, 2016
100% Bullhide morale patches, using portions of the same bullhide that their Tejas Gun Belts are made from, these hook and loop backed patches can be used anyplace a standard woven patch would be used. Each patch is heat embossed with a logo or image that will be unique to that patch due to the natural qualities of real leather.
Features:
·Top Grade Bullhide Leather
·Dimensions: 3”X 2”
·Hook and Loop Backing
·Made in Texas, USA
www.magpul.com/products/propaganda/patches
Beyond Explains Their Softshells – Rig, or Rig Light? Which one is right for you?
Thursday, August 25th, 2016Beyond asked us to share this post with our readers.
We often get asked about the differences between our Rig and Rig Light Softshells. We wanted to address these questions with a brief overview of softshells, what they do and when to use them.
What is a Softshell?
Softshell has become a rather large category in performance textiles. In general, a softshell is a stretch woven, or knit that is breathable, wind and water resistant. Softshells are typically used for high energy aerobic activities where you need protection from the environment, but you also require efficient heat transport and moisture management. The stretch properties of softshell also make these garments easy to move in and more durable around seams.
Materials
Both the Rig and Rig Light Softshells are built out of a 4-way stretch Tweave© Durastretch© fabric. The main difference between the Rig and the Rig Light is that the Rig Softshells have a layer of fleece laminated to the Durastretch© fabric. This layer of fleece is going to add extra insulation for additional warmth in colder environments. Because the Rig Light Softshells don’t have the fleece laminate, they are going to be lighter, more packable and will be better in moderate temps.
Packability
The Rig Light Jacket and Pant are going to be slightly more packable because they don’t have the extra layer of fleece laminate. Here’s a comparison of the Rig Jacket and the Rig Light Jacket next to a 32oz Nalgene bottle:
Which one is right for you?
Both the Rig and Rig Light Softshells are designed to be worn in active use profiles, so it really comes down to temperature range. If you are planning to be in cold – extreme cold temps, you’re going to want to go with the Rig Softshells. If you’re going to be in more moderate temperatures and you’re trying to save weight, you’re probably going to want to go with the Rig Lights.
It’s also important to think about what might integrate the best with your existing kit. For instance, if you paired the Rig Light Backcountry pants with the A2 Longjohn, you’re going to get similar cold weather functionality as the fleece laminated Rig Pants. When the weather, or seasons shift, you can ditch the long johns and you have a super breathable pant for moderate to warm weather.
We designed the entire Axios system to be customizable to your specific use profile. If you ever have any questions about which garment will work best with your existing kit, or if you have questions about what to bring on your next adventure, please reach out to connect@beyondclothing.com and we’ll get you squared away.
Rig and Rig Light Softshells are in stock and ready to ship. Contact mission@beyondclothing.com to place your end of year orders.
Read the rest of the Blog Post Here: www.beyondclothing.com/blog/beyond-softshells
Juggernaut.Case Introduces the New SLEEV and BUMPR Products for 2016
Thursday, August 25th, 2016For years guys have been telling me that they wished Juggernaut’s handheld device cases were more affordable. Now, they’ve leveraged everything they learned building the program-level cases in order to introduce streamlined variants that you can afford to buy out of your pocket. Check these out.
With more waterproof smartphones on the market, Juggernaut.Case™ introduces two new levels of protective cases evolved from our field-proven rugged hard case. The new cases are an affordable solution for users that don’t need all of the protection of the original Juggernaut.Case™ but still seek impact/drop protection in addition to full compatibility with all existing Juggernaut.Case™ mounts. The new cases are called the “SLEEV” and the “BUMPR”. Both are available with or without cables for connecting to Tactical Radios/Hubs.
While the SLEEV retains the capability to utilize the new QDD (quick disconnect DOOR) and the QD Cable assemblies via the two thumbscrews, the BUMPR is either Cabled or Non-Cabled with sealed access ports to the micro-USB connector and 3.5 mm audio jack. A new low-cost cable assembly for these cases that terminates in a standard USB-A connector allows unshielded data transfer and 5V power to the device from any portable external battery or car charger, etc.
For more information on these new cases visit: www.JuggernautCase.com or download the PDF file at: www.juggernautcase.com/PDF_Files/SLEEV_BUMPR_Release
New SureFire Brand Video
Thursday, August 25th, 2016TNVC Introduces Some New Swag
Wednesday, August 24th, 2016
Magpul Releases Receiver Extensions and Buffer Components
Tuesday, August 23rd, 2016Back during SHApat Show we have you a little sneak peek at the Magpul Receiver Extension. Well, now they’re available along with complimentary buffer components and better yet, they are offered for both the AR-15 and SR-25 platforms.
Not your average receiver extensions. Constructed of impact extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction. Available in a 7-position AR15/M4 profile as well as a 10-position SR25/A5 profile optimized to fit with the full line of Magpul Mil-Spec carbine stocks.
In addition to the new Magpul Receiver Extensions, you can satisfy all of your stock needs.
Stock components available are:
·Stainless Steel AR15/M4 Carbine Buffer Spring
·Stainless Steel AR15/M16 Rifle Buffer Spring
·AR15/M4 H Carbine Buffer
·AR15/M4 H2 Carbine Buffer
·AR15/M4 H3 Carbine Buffer
·Heat-Treated Castle Nut
·Receiver End Plate
·ASAP
·ASAP-QD
Get them at www.magpul.com/stockcompletion.
The Birth Of The BE Meyers MAWL
Monday, August 22nd, 2016This is how the MAWL started, two years ago today.
It started with B.E. Meyers & Company, Inc. having their engineering team clear rooms at an abandoned school complex, day and night. They cleared 500 rooms the first day, and 400 the second day. It wasn’t pretty but it worked.
By learning the limitations and constraints of existing laser systems available, they understood exactly what capability gaps needed to be filled. By ensuring the engineering team was part of the discussion from the initial concept, they knew what the commonly was asking them to design and why, and thus MAWL was born.
