FirstSpear TV

Archive for the ‘Armor’ Category

DSEi – NFM

Thursday, September 12th, 2013

These vests were built by NFM as a sub to Sagem as part of the SmartVest program currently being undertaken by the BeNeLux. Sagem is also working on the next generation of the French soldier system, FELIN.

20130912-081023.jpg

Underneath these outer vests named LCVA and LCVB, the Soldier wears a fragmentation or soft armor vest. Along with the integrated vest seen to the right, these four vests make up the system which is joined by three packs including a 100 liter 48 hour pack. The packs share an integrated waist belt that can be used with the vests as well as used alone as a cartridge belt.

20130912-081042.jpg

You will note the 6/12 technology as well as the Tubes which is used as a front closure on this vest rather than a zipper. Awhile back, we told you that FirstSpear had entered into a cooperative agreement with NFM to utilize their technology. This makes them the exclusive
Licensee of these technologies.

20130912-081104.jpg

Interestingly, these vests feature 6/12 technology on the front and PALS at the rear. This is so a user won’t place any comma devices at the rear and route the cables internally and possibly foul a quick release.

20130912-081119.jpg

Here you can see the internal cable management afforded by the 6/12.

20130912-081134.jpg

Above, is a shot of how the plates are carried. Under this concept, the Soldier dons he plates only when needed and can wear a much lower profile frag vest for other tasks.

DSEi – S&S Precision

Tuesday, September 10th, 2013

Also on hand in the Edgar Brothers booth are our friends from S&S Precision. It’s wild to travel all the way to London to see guys that are literally, right across town.

20130910-100431.jpg

They’ve produced a variant of the PlateFrame that accommodates the British plates along with a PlateSock.

20130910-100832.jpg

S&S Precision is also exhibiting their new shoulder straps and cummerbund for the very first time. Under development and test for the past few months, these items utilize mesh and padding for hot environments where waterproof webbing is not required.

New Armor Inspection System Ensures Ballistic Plates Safe For Deploying Soldiers

Wednesday, September 4th, 2013

The Army put out a press release yesterday discussing the use of Non-Destructive Test Equipment for hard armor plates in USAREUR which saves time and money over the old process of shipping them back to CONUS to be X-rayed for cracks.

size0

Soldiers who have deployed in support of Operation Enduring Freedom, Operation Iraqi Freedom or Operation New Dawn, have the shared experience of being issued ballistic plates for their body armor that have been turned in by other Soldiers after their combat tours. Part of ensuring plates are combat ready involves a detailed inspection process to identify defective plates, and remove them from circulation.

Until recently, the process of ensuring plates being issued were inspected within a specific time frame meant the 21st Theater Sustainment Command spent time and money sending plates to Sierra, Calif., for inspection, before being shipped back to Europe for deploying Soldiers. The current policy only allows for plates to be issued to deploying Soldiers if they have been inspected within the previous nine months.

“What we had that needed to be scanned would be shipped back to the States,” said Carla Stovall, a logistics management specialist with the 21st TSC’s Support Operations and a native of Copperas Cove, Texas. “Anytime there was a deploying unit we would send our requirements back with the amounts that we would need and they would ship over inspected plates.”

Now, the 21st TSC has acquired an Armor Inspection System, or AIS, which is a system that uses X-rays to scan plates in order to identify deficiencies within them. Having the new system now allows for a mobile team of Non-Destructive Test Equipment, or NDTE, personnel to be flown in to inspect and certify the plates used throughout U.S. Army Europe.

“This is actually the first fixed site with an AIS that we have where we can actually jump the mobile team right into the inspection process,” said Bruce Cardell, the NDTE team lead and a native of Lakewood, N.J. “The intent is to take a mobile team, drop them into a fixed site, process all of the plates they have, and place the plates back on the same cycle and same inspection window, while at the same time taking the bad plates out of service.”

“Now the only plates that are being sent back to the states are the unserviceable plates, which will go back into circulation once they are repaired,” or be destroyed if they cannot be repaired, added Cardell.

The cost saving advantage of having a fixed AIS in Kaiserslautern is substantial, said Cardell.

“If you look at the big picture, it’s significant; the logistical cost, the transportation and the resources it requires to get things from point a to point b is enormous,” he explained.

In the past, it was common to have a large number of plates in the warehouse that were considered not issuable because of the length of time that had passed since their last inspection.

“Having available stock makes a big difference when you have deployers,” said Stovall. “We need to have the right plates for the Soldier when they’re ready to deploy so they have that peace of mind that they’re deploying with the best.”

Currently the mobile team is on the ground on Rhine Ordnance Barracks, Germany, until Oct. 8, inspecting the more than 50,000 plates from across Europe, in an effort to maximize the stock of plates eligible for deployment.

Having the NDTE inspection team on site “should be a recurring thing,” said Stovall. “All of the plates that are considered issuable will all expire at the same time so we would want to have that taken care of before the nine months are up.”

“We look at the operation as being a lifeline and gives the Soldiers and commanders the reassurance that they have the best equipment in theater,” said Cardell. “It gives them that reassurance that they have the best type of plate protecting them in the field.”

Once complete, the plates which pass inspection will be sent back to the various central issuing facilities throughout Europe, and will be ready to protect Soldiers deploying all throughout the world.

Grey Ghost Gear – Minimalist Plate Carrier

Thursday, August 22nd, 2013

GGG Minimalist Chest Rig

Grey Ghost Gear has released their new Minimalist Plate Carrier. Designed for low profile wear or contingency carry, the MPC is thin and light enough to wear beneath a cover garment or keep on standby in a ready kit. It’s designed for 10 x 12 hard plates or large ESAPI plates and the plate pockets are lined with LiteLok pack cloth for abrasion resistance. The MPC features six rows of PALS-style webbing with built-in matching loop material on the top three rows for the option of attaching patches or ID panels. The front of the carrier features a discreet stash pocket for small items one would need immediate access to, such as maps, medevac cards, knives, etc. The MPC is designed as one-size-fits-most, with adjustable shoulder straps and integrated elastic side straps. The inside faces of the carrier are lined with Air Mesh for comfort and breathability. The MCP is available in Coyote Brown and MultiCam.

www.greyghostgear.com/rigs/minimalist-plate-carrier-large

SPECOPS.PL Introduces New Ultra-Lekki Plate Carrier

Sunday, August 18th, 2013

Fotograf: Krzysztof Magolon/www.afoto.pl tel. 509 982 594

Ultra-Lekki Plate Carrier – or Ultra Light PC is SPECOPS.PL’s answer to the latest move toward webbing free PALS compatible carriers.

Consisting of a dual 750D Cordura laminate, the carrier is designed to carry two SAPI plates with the option of attaching side plates via MOLLE pouches.

Available in two sizes which corresponds to small/medium and large/x-large plates, the carrier weighs in at less than 400g.

Available in all SPECOPS colors.

www.specops.pl

Gratuitous Mayflower Kit Photo

Thursday, August 8th, 2013

20130807-105845.jpg

Can you identify everything in this photo?

www.mayflower-rc.org

Rogue Gunfighter LVR Now Available In Black

Friday, July 26th, 2013

Blcak-LVR

By popular request, Rogue Gunfighter’s LVR is now available in Black. The LVR is a Berry-compliant low visibility armor carrier designed with an integrated pouch-cummerbund system that forgoes the need for multiple MOLLE pouches. An included detachable modular MOLLE chest rig does allow for further customization, however, along with multiple Velcro loop panels. Other features include adjustable shoulder straps, rear vest panel with built-in admin pouch, drag handle, adjustable radio pouch, and removable kangaroo two magazine pouch.

www.roguegunfighter.com/index.php/tactical-nylon/lvr-detail

Factors that Affect Law Enforcement Officers’ Use of Body Armor

Sunday, July 21st, 2013

The National Institute of Justice has launched a page on the website entitled, “Factors that Affect Officers’ Use of Body Armor.” It is meant to aggregate any studies that they have conducted relative to the use of body armor by law enforcement officers.

Currently, there are two topics with supporting documentation: Agency Policies Promote Use of Body Armor and Comfort of Body Armor. One interesting role NIJ has taken in the improvement of body armor comfort is in the realm of fit. They have worked with the American Society of Testing and Materials to develop standards for fitting armor so that industry and consumers alike will work from a common point of view for sizing.

This is a great resource.

www.nij.gov/nij/topics/technology/body-armor/use