XC3 Weaponlight

Archive for the ‘Armor’ Category

USSOCOM to Develop Tactical Assault Light Operator Suit

Friday, May 17th, 2013

On 15 May, at the start of the Special Operations Forces Industry Conference, U.S. Special Operations Command, Headquarters Procurement Division issued Solicitation Number USSOCOM_RFI_ST(TALOS), a special notice seeking industry collaboration with their Science & Technology community for the development of a Tactical Assault Light Operator Suit (TALOS).

The request is pretty straightforward but the path to get to a fielded product remains murky, particularly as defense procurement budgets have been slashed. Many in industry are rather shy about sharing cutting edge technologies with government in the absence of a value exchange. However, this might make for a great dual-path strategy for companies that developed concepts for Big Army’s SPS and are looking for a return.

Before I go any further, this sounds fantastic and this is the stuff that SSD exists for, but two observations. First, this sure looks, sounds and smells like it should be a BAA. And, once again, I have to ask, why wasn’t this project begun at any point over the past 11 years of war? At any rate, here’s what SOCOM has in mind.

A. INTRODUCTION: Science and Technology (S&T) Collaboration
This Request for Information (RFI) is NOT a Broad Agency Announcement, solicitation for proposals, proposal abstracts, or quotations. The purpose of this RFI is to solicit technology demonstration candidates from Research and Development (R&D) organizations, private industry, and academia for inclusion in future experimentation events coordinated by the U.S. Special Operations Command (USSOCOM). USSOCOM invites industry, academia, individuals and Government labs to submit technology demonstration nominations addressing innovative technologies leading to possible Government/Industry collaboration for development of USSOCOM technology capabilities supporting a Tactical Assault Light Operator Suit (TALOS). The intent is to accelerate the delivery of innovative TALOS capabilities to the Special Operations Forces (SOF) warfighter.

After review of the technology demonstration nomination submissions, the Government may invite select candidates to demonstrate their technologies at the USSOCOM sponsored S&T demonstration event. The demonstration venue will provide an opportunity for the submitter to interact with USSOCOM personnel for the purpose of USSOCOM assessing potential impact of emerging technology solutions on USSOCOM missions and capabilities. The intent is to accelerate the delivery of innovative capabilities to the SOF warfighter. Industry participation in demonstration activities does not suggest or imply that USSOCOM will procure or purchase equipment.

B. OBJECTIVE:
1. Background: These collaborative S&T demonstrations are conducted with representatives from Government R&D organizations, Academia, and Industry. S&T demonstration events provide an opportunity for technology developers to interact with operational forces and Government development personnel to determine how their technology development efforts and ideas may support or enhance SOF capability needs. The environment facilitates a collaborative working relationship between interested parties to promote the identification and assessment of emerging and mature technologies for the primary goal of accelerating the delivery of technology discoveries to the SOF warfighter. The event facilitates USSOCOM personnel to identify potential technology solutions, impacts, limitations, and utility to meet SOF technical objectives and thrust areas. Materiel solutions brought to the event should be at a Technology Readiness Level (TRL) of 5 or greater. Demonstrations may be between an hour and half a day in duration and may be conducted in unimproved expeditionary-like conditions. At the discretion of USSOCOM, respondents may be asked to complete a vendor loan agreement (see attachment).

2. Demonstration Focus: Demonstrations will be conducted from 8-10 July 2013, at or near MacDill AFB, FL and will explore emerging TALOS technology solutions for the advance enhanced mobility/protection capabilities to augment the direct assaulter. The goal of these demonstrations is to identify technologies which could easily be integrated to form an initial capability within twelve months. A secondary goal is to determine the feasibility of fielding objective capabilities within three years. Any TALOS technology-based demonstration conducted at the event shall be capable of supporting a SOF unit to provide a revolutionary improvement in SOF operations. Any and all TALOS solutions must include all necessary software and hardware to accomplish the mission. Direct Assaulter enhanced mobility/protective technologies may include, but are not limited to:

a. Advanced Armor: Materials to support next generation full-body ballistic protection
b. Mobility/Agility: Enhancement platforms such as powered exoskeletons
c. Situational Awareness (SA)
d. Light/noise discipline
e. Command, Control, Communications & Computers (C4): Such as conformable & wearable antennae and wearable computers
f. Individual soldier combat ready displays: Including non-visual means of information display, and potentially utilization of cognitive thoughts and the surrounding environment to display personalized information
g. Power generation and management
h. Thermal management of suit occupant
i. Medical: Embedded monitoring, oxygen systems, wound stasis, electromechanical compensation

Proposed solutions should take into consideration “lightening the load” of the operator, mentally and/or physically.

3. Security Requirements: Vendors should not submit classified information in the technology demonstration nominations.

4. Respondents interested in conducting demonstrations using technologies like: lasers, explosives, weapons using live fire, moving equipment, vehicles, and other technologies that present an occupational hazard shall prepare and submit a safety risk assessment. The risk assessment shall address the likelihood and severity of any inherent risks as well as risk mitigation measures required to bring the resultant risk to a low level. The risk assessment shall be submitted as an attachment to the experiment nomination. Reference MIL-STD-882D for instructions and information regarding risk assessments.

YADDA, YADDA, YADDA

Technology Demonstration nominations shall be submitted electronically via SORDAC’s BAA and RFI Submission Tool at http://www.socom.mil/sordac/Pages/BAAHome.aspx (like I said, sounds like a BAA to me)

YADDA, YADDA, YADDA

You’ll be responsible for your own expenses if you’re invited to participate. (I’m paraphrasing here.)

YADDA, YADDA, YADDA

D. BASIS FOR SELECTION TO PARTICIPATE:
Selection of respondents to participate will be based on the extent to which the technology represents a particular class or level of capability that can be provided to SOF.
Other considerations include:
– Technical maturity
– Relevance of or adaptability to military operations/missions
– Relevance to current operational needs
– Relevance to Event Focus Area

And then, there’s a bunch of other stuff you need to read if you are going to participate.

You’ve only got a short time to get your nomination (Response Date:
May 31, 2013 4:00 pm Eastern) in so drop what you’re doing, right now, and go read the whole thing at www.fbo.gov

US Palm Introduces School Defender

Thursday, May 16th, 2013

20130516-180927.jpg

In an effort to help educational staffs prepare for active shooter situations, US Palm has introduced a new variant of their Defender armor carrier called appropriately enough, the School Defender.

www.USpalm.com

SOFIC – Rogue Gunfighter

Tuesday, May 14th, 2013

Rogue Gunfighter launched their MOAB armor carrier today at SOFIC.

20130514-144931.jpg

Here you can see the small “wings” they’ve added to the front panel which will accept radios, med gear, etc.

20130514-145245.jpg

RG has developed Clamshell Pouches which are MOLLE Adapters that slide into place over the cummerbund.

20130514-145315.jpg

You can preconfigure them to rapidly set your kit up and they stay in place via internal Velcro on both the Clamshell and Cummerbund.

20130514-145332.jpg

The MOAB accepts clip on backpacks. In the same vein, the MOAB also accepts clip on chest rigs.

20130514-145350.jpg

www.roguegunfighter.com

Rogue Gunfighter Offers Discount to SSD Readers

Wednesday, May 8th, 2013

RG May Sale

Enjoy 15% off on the LVR and Armor products from Rogue Gunfighter throughout the month of May. Use code RGMaySale at checkout.

www.roguegunfighter.com

Warrior West – Blue Force Gear

Thursday, April 25th, 2013

I was able to check out the new PLATEminus™ from Blue Force Gear which debuted yesterday here at Warrior West. Everyone I spoke to at the show was very excited about the carrier but asked about a more substantial cummerbund.

20130424-202317.jpg

I spoke with BFG and they told me that something has been simmering on the back burner for awhile but based on this initial feedback they may introduce it soon.

Available NOW in MultiCam from www.BlueForceGear.com

Blue Force Gear Unveils PLATEminus at Warrior West

Wednesday, April 24th, 2013

Weighing in at just 335 grams, the new PLATEminus™ is the latest component in Blue Force Gear’s growing MOLLEminus line. It’s designed to fit any SAPI/ESAPI style armor plates, with or without plate backers, and is manufactured from BFG’s proprietary ULTRAcomp laminate which incorporates a combination of slots and squares to accommodate as Helium Whisper as well as other PALS-compatible pouches.

PLATEminus Front

Other than the low weight, the key design feature for PLATEminus is that it incorporates a color matched separate plate pocket that’s made from a combination of Tweave and Cordura that accommodates, protects, and camouflages plates and backers. The MOLLEminus construction strategy is already very lightweight but BFG went a step further in their weight reduction strategy by relying on simple 1″ side load stabilization straps. Another interesting feature is that the LMAC shoulder straps can be adapted to the PLATEminus™.

“We designed PLATEminus with simplicity in mind,” said John Felushko, Blue Force Gear’s Product Line Manager. “PLATEminus is simple to put on with single pull forward side straps, simple to customize due to full MOLLE compatibility and simple to size – just buy your SAPI/ESAPI plate size.”

The PLATEminus™ is currently available in MultiCam at OP Tactical and will soon also be offered in Coyote Brown and Urban Wolf.

If you’re attending this week’s Warrior West Expo in San Diego be sure to stop by the BFG to check it out.

www.BlueForceGear.com

Ares Armor

Saturday, April 20th, 2013

Ares Armor showed me a prototype of their Derma Plate Carrier at today’s ‘Shot heard round the world!’ Event in New Hampshire.

20130420-131701.jpg

It incorporates several new features including the Ares-Austrialpin buckle we previewed awhile back.

20130420-132130.jpg

It’s a full cutaway cable release design. Look for the Derma and its unique elastic cummerbund late 2nd Qtr.

20130420-132209.jpg

While I was checking out the Derma I noticed Jon’s cool-guy jeans.

20130420-133156.jpg

The Tacticasual trousers integrate padded knees as well as two 30 round mag pouches in the left thigh.

20130420-133337.jpg

The magazines pop right up thanks to their mag elevator feature. No word on when these might be available.

www.aresarmor.com

Eagle Industries SOFBAV Aero Assault

Tuesday, April 9th, 2013

The Eagle Industries SOFBAV Aero Assault is one of two armor system solutions adopted by USSOCOM as a replacement for the decade-old MBAV (the other is the Crye Precision AVS). I first saw an early variant of the Aero last summer and the final version at SHOT Show 2013. Because the system is so versatile and difficult to capture in a one paragraph report, Todd McDunn and Don Gallo invited me to come by one of their facilities and take an in-depth look at the Aero.

SOFBAV

Due to scheduling it was not until recently that I was able to take them up on their offer. I’ve known Don Gallo for many years and it was great to spend the afternoon with him and his team. When you see Don on the floor of a trade show he is generally very serious and business like, but as he ran me through the paces on the Aero SOFBAV his eyes lit up and you could hear the excitement in his voice. You can tell that this is a project that Eagle has put a lot into and as you dig down into the details, there’s much to be proud of.

Aero SOF Bav Cummerbund front

First off, the name. Aero doesn’t mean or stand for anything. It’s just the name they chose to market the vest so don’t read anything into it. SOFBAV on the other hand, stands for Special Operations Forces Body Armor Vest and denotes its use.

Aero SOF Bav rear detail

This is an evolutionary design based on the MMAC (Multi Mission Armor Carrier); the SOFBAV Aero Assault is completely modular in nature. Initially, the system will be offered with 80 component items. For example, there are nine different front flaps including a slick model, MOLLE version, a variant with Fort Bragg-style magazine pouches and even one that incorporates the pocket configuration of the muti-purpose chest rig. If I could choose one word to describe the SOFBAV Aero Assault it would be ‘customizable.’ You can scale from a simple plate carrier all the way to a full assault armor carrier and through the use of modular components configure the load specifically for the mission at hand.

Aero SOF Bav

It is designed to fit the legacy MBAV soft armor in sizes s/m or l/XL as well as BALCS and ESAPI hard armor plates. Front and Back Bodies can be paired regardless of size, offering additional customization regardless of size. The Aero Assault can be configured as either releasable or non-releasable. Eagle went one step further and made it simple to quickly reassemble the Aero Assault for wear in a non-releasable configuration one it has been released thanks to the side release shoulder buckle.

Aero SOF Bav Shoulder buckle detail

The cutaway pull cable can be configured in multiple ways based on mission and user preference. Of the release options, four are on the body; left, right, center chest and center waist. The shoulder straps are interchangeable with shoulder release configurable to either side. Additionally, the cable release can be set on the left or right side of the cummerbund. Cables are routed through the shoulders which lowers the time for New Equipment Training.

Aero SOF Bav side detail

The Front Body incorporates an integrated admin pouch up high on the chest as well as removable front flaps which were briefly mentioned before. As with most armor carriers, the plates are loaded from the bottom and can be easily released.

Aero SOF Bav front flap attachment detail

The Removable Front Flaps attach via PALS. There are multiple versions as mentioned before as well as polymer inserts for various magazines.

Additionally, the Aero Assault Front Body is compatible with the ever popular multi-purpose chest rig which can be attached directly to the front of the vest.

Aero SOF Bav Rear Panel

The Back Body incorporates cable management pass through at kidneys as well as cable management ports at shoulder blade height. The flap can be pulled up in order to configure or inspect the cutaway.

Aero SOF Bav Back Panel

In addition to a drag handle, the Aero Assault also offers zip-on back panels and packs. Above, you can see a pack on the left and the hydration pouch with bolt cutter on the right. There is also a MOLLE compatible back panel available.

Aero SOF Bav Packing Loop 2

Eagle uses a Taco flap at the rear of the vest to guide the cummerbund.

Aero SOF Bav Packing Loop

One unique requirement for this armor was the incorporation of a waist mounted load bearing system similar to that of a backpack. For this, Eagle teamed with Granite Gear who provides some of SOCOM’s family of packs. It is based on the Chief frame and features a single point of articulation on the lower back. The frame itself fits into a separate channel in the interior of the Back Body. The Load Lift attaches via a cradle at top inside placket of frame sheet so not against seam.

Aero SOF Bav Chief Frame

Lots of work was put into the Cummerbund component of the Aero Assault.

Aero SOF Bav Cummerbund

The Aero Assault cummerbund is 4″ wide and uses slip-on accessory panels that are modular and accept inserts. One example of the slip-on accessory panels are the side plate pockets manufactured from Tweave 520 softshell material and which accommodate 6×6 6×8 up to 6×11 plates.

Aero SOF Bav Components 5

The Assault cummerbunds originally consisted of three different styles but that has been streamlined down to two and both are the Tweave 520 money belt-style front and rear. They are sewn into four separate compartments and will accommodate MBITR radios as well as single magazines.

Aero SOF Bav Components 6

PALS webbing is the modified 3/4″ standard in order to decrease weight and make it a little easier to weave PALS pouches when the cummerbund is full.

Aero SOF Bav Components 4

Notice how the end of the Cummerbund stores inside a compartment when not needed for use as a cutaway.

Below are the “Releasable Tri-Glide Extenders, Assault” which are fixed distance release extensions and used when configuring the vest as a cutaway.
Aero SOF BAV Straps

I’ll wrap this up with a few materials notes. The vest is made from 500D Cordura with a couple of additional materials. The interior of the Aero Assault consists of 1/4″ foam padding with Tweave 520 against the body for comfort. It is interesting to note that there is no metal on this vest except for the sleeved cutaway cable. Also, Eagle uses Murdoch’s Jacquard webbing throughout the design because it retains the camouflaged pattern much longer. It has other properties which are also desirable for this design such as durability.

Aero SOF Bav Components

The design of the SOFBAV Aero Assault is extraordinary. They have incorporated a great deal of lessons learned from use of prior vests into this design. If you are looking for a vest that will allow users to configure their armor for a variety of missions then this is worth checking out.

I want to thank Eagle Industries and in particular Don Gallo and his team for their hospitality as well Todd McDunn for setting the visit up.