Optics | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Optics’ Category

Quantico Tactical Thursday – SNIPERCAP by Agile Precision

Thursday, September 7th, 2017

The Multi-Function Lens Cover to Rule Them All.

Quantico Tactical is proud to carry the SNIPERCAP by Agile Precision. The SNIPERCAP gives a shooter new optics capabilities in a robust design that o?ers protection for the objective lens of a ri?e scope. In addition to o?ering sealed water resistant protection for your optic’s objective lens, it allows the user to adjust the aperture exposing the lens. This gives the user a great tactical advantage in signature management and light transmission.

The SNIPERCAP creates an adjustable iris that allows the shooter to augment their optic in multiple ways. In its fully open mode, it acts as a typical sunshade for the scope. In the fully closed position, the SNIPERCAP gives water-resistant protection for the objective lens of the ri?e scope. This o?ers a major advantage over other protective caps. There are no ?ip caps to be broken, and nothing to remove or get lost. The true capabilities of this design, however, lie in between the two.

By twisting the cap the user can vary the aperture from fully open to completely closed depending on what the situation allows. There are ten potential aperture sizes with tactile clicks at each stop allowing the user to operate by feel. When in a tactical scenario where the shooter must avoid detection, reducing the aperture virtually eliminates glint o? the objective lens while still allowing the shooter to view the target. The size of the aperture can be adjusted based on ambient light conditions to balance the need for optical clarity and minimal glint.

If using an in-line night vision device, the SNIPERCAP can act as a coupler. Reducing the aperture size reduces glare coming o? the objective lens from the night vision display and in some cases completely seals around the ocular lens.

The SNIPERCAP is available for several optics including the:
• Leupold Mk4 12-40×60 Spotting Scope
• Leupold Mk6 3-18 Rifle Scope 44mm Objective
• Steiner M5Xi 3-15 50mm Objective
• Steiner M5Xi 5-25 56mm Objective
• S&B PMII 56mm Objective

The SNIPERCAP is available to US Military and Law Enforcement organizations from Quantico Tactical via our GSA Schedule or DLAs TLS Program.

For a quote or more information about Quantico Tactical or the Agile Precision SNIPERCAP please e-mail GovtOps@QuanticoTactical, call 910.944.5800 or visit www.QuanticoTactical.com

Tags: Agile Precision, Quantico Tactical
Posted in Advertiser, Optics | 7 Comments »

Mod Zero Defense – M-Zero Zeroable Picatinny Rail

Wednesday, September 6th, 2017

Mod Zero Defense is a Pennsylvania-based company which has created the M-Zero Picatinny Rail. The M-Zero is designed to allow shooters to use a pre-zeroed optic across multiple firearms by adjusting zero on the mount itself, rather than readjust the optic for every new rifle. The below image works as a great visual indicator of the M-Zero’s function.

As for the technical details, here’s the bullet point list:

1/4 MOA elevation adjustment

1/2 MOA windage adjustment

240 MOA elevation range of motion

100 MOA windage range of motion

Height: 0.6 in

Weight: 0.45 lbs

Length: 7.08 in

User customizable range dial

Two dials for zeros (barrels and ammo)

Fits any MilSpec rail with 8 slots

12 rail slots

The M-Zero will soon be up for funding on Kickstarter. Check out the link below for more details, and to subscribe to Mod Zero Defense’s email list.

www.modzerodefense.com

Tags: Mod Zero Defense
Posted in Optics, weapons | 22 Comments »

Aimpoint To Launch Highly Anticipated CompM5 At DSEI

Wednesday, September 6th, 2017

Malmö, Sweden – September 6, 2017 – Aimpoint, the originator and worldwide leader in reflex sighting technology, will launch their new Aimpoint® CompM5™ sight at DSEI in London, England. The CompM5 can be viewed in the Aimpoint booth N2-229 during the show dates September 12 – 15. This is the newest member of the Comp Series and product details will be released on Tuesday, September 12th.

Aimpoint produces a complete line of high quality reflex sights for use by military, law enforcement, hunters, and sport shooters worldwide. The company also produces electronic fire control systems for use on crew-served military weapons. For more information on the CompM5 or other Aimpoint® products, please visit the company’s webpage: www.aimpoint.com.

Posted in Advertiser, DSEi, Optics, Press Release | 7 Comments »

Optics 1, Inc (Safran) I-CUGR Selected for USMC Sniper Range Finder Program

Friday, September 1st, 2017

Bedford, New Hampshire, August 23, 2017

Optics 1, Inc. (Safran) announced today that its Integrated Compact Ultralight Gun-mounted Rangefinder (I-CUGR) has been selected by the United States Marine Corps (USMC).

The I-CUGR is a small, lightweight, and rugged weapon-mounted laser rangefinder with integrated illumination and aiming lasers that will give USMC the ability to quickly range targets without taking hands off their rifles — providing more accurate first round hits.

“We appreciate the opportunity to continue working closely with the U.S. Marine Corps in providing the Marines with superior technology that provides precise and accurate targeting solutions,” said Jose Andrade, Optics 1 Business Development Manager and a retired USMC Sergeant Major. “The selection of the I-CUGR solidifies the confidence in our commitment to providing technologies that are light yet powerful and are critical to the success of the USMC’s mission requirements.”

The I-CUGR has been designed by Optics 1 leveraging proven rangefinder technology from Safran Electronics & Defense. Production will take place in Bedford, New Hampshire at Optics 1. The initial order is for 315 units with deliveries beginning this year.

For more information: www.optics1.com or www.www.safran-group.com

Tags: Optics 1, Safran
Posted in Optics, Press Release | 3 Comments »

Scalarworks Launches Aimpoint Pro Quick-Detach Mount

Wednesday, August 23rd, 2017

Easton, PA – August 22, 2017 – Scalarworks is pleased to introduce the Low Drag MountTM for Aimpoint PRO sights; the lightest quick-detach Aimpoint PRO mount in existence.

The LDM/PRO is a lightweight, high-strength, low-profile, quick-detach optic mount for with MIL-STD-1913 Picatinny rails, that is compatible with the Aimpoint PRO, Aimpoint ACO, Aimpoint CompM2, and Aimpoint CompM3, and most other 30mm tube sights.

The Scalarworks LDM/PRO features a user friendly and low-profile 30mm ring. The Scalarworks ring has a precision fitted alloy steel hinge that ensures even pressure around the optic, without requiring the tedious and imprecise setup that traditional rings do. Twin oversize CNC machined shoulder screws provide even tension and act as structural elements, making the entire ring assembly phenomenally rigid.

Like every Scalarworks Low Drag MountTM, the LDM/PRO has the highest strength-to-weight ratio of any quick detach mount on the market. It’s tubular monolithic base is CNC machined from ultra high-strength 7075-T6 aluminum, and features our patented recoil-proof thumbscrew with ball detent mechanism. It also has the same precision telescoping clamp as our popular Aimpoint Micro, and Trijicon MRO mounts, which ensures a repeatable zero with each installation.

The LDM/PRO weighs less than 2.45oz (in lower-third height) which is less than half that of Aimpoint’s bundled QRP2 mount. The LDM/PRO is proudly made in the USA, and is available in both Absolute and Lower-Third Co-Witness height variants.

To learn more about the Scalarworks LDM/PRO; please visit scalarworks.com/shop/optic-mounts/ldm-pro

Tags: Scalarworks
Posted in Optics, Press Release, Weapon Accessories | 5 Comments »

Okay Kids, Don’t Stare At The Solar Eclipse With Dad’s NODs

Monday, August 21st, 2017

It was bound to happen. Our friends at TNVC received this email earlier today.

Sent: Monday, August 21, 2017 3:09 PM
To: Sales
Subject: Night vision binoculars

To whom it may concern,

My Dad has a pair of your night vision binoculars. Today I was stupid and used them during the day, and the sun ruined the lens. I didn’t know that the sun could ruin the lens. I feel so awful and sick that I did this to my Dad. He’s a veteran in the military and he has been saving up so much of his money to buy these binoculars, and he also waited about 4 months to get them. I’m only 21 and there’s no way I can repay him for what I’ve done. Please help me out. Is there anywhere I could get the lens replaced? Is there anything I can do?

Thank you,

XXXX XXXXXXXX

Now, let’s see how many SSD readers with 21 year olds and a new set of Bino NODs, rush home from work.

Tags: Coming Soon To GoFundMe
Posted in As Seen On Facebook, Optics, WTF? | 19 Comments »

US Optics Is Moving To Montana

Sunday, August 20th, 2017

US Optics was recently acquired by DRSG has announced that after 26 years in Southern California, they will be relocating to Kalispell, Montana. They advise customers that there may be a brief pause in production while they bring the new Montana facilities online.

www.usoptics.com

Tags: US Optics
Posted in Optics | 13 Comments »

Gunwerks Announces New BR2500 Ballistic Rangefinder

Thursday, August 17th, 2017

Gunwerks announced today the release of it’s latest version ballistic rangefinder, the GSeven branded BR2500. The newly updated BR2500 carries a major upgrade in laser rangefinding capabilities, extending the effective range of the BR2500 to over 2,500 yards dependent on conditions. The BR2500 also features the best available laser beam divergence, set at .75 MRAD and optimized for hunting conditions with advanced signal processing tuned for ranging animals instead of highly reflective objects like steel. As with previous models, the BR2500 features five on-device programmable ballistic profiles, sensors for range, pressure, temperature and incline, and provides outputs for wind compensation.

The BR2500 provides the user a complete ballistic solution, providing both angle compensated and shoot-to range solutions for both MOA and BDC turrets and reticles.

“This is our most advanced ballistic rangefinder yet.” noted Aaron Davidson, Gunwerks founder and CEO. “We came out with the BR2 6 years ago, and this is the natural progression of ranging and ballistic technology. With the BR2500, we’re meeting or exceeding ranging capabilities previously only available in advanced military technology, while still retaining the Class 1 eye-safe designation with our laser.”

The G7 BR2500 is available immediately via Gunwerks direct and in coming weeks through Gunwerks’ network of dealers at a street price of $1,599. Learn more at www.gunwerks.com/store/featured-products/g7-br2500-rangefinder.

Tags: Gunwerks
Posted in Optics, Press Release | Comments Off on Gunwerks Announces New BR2500 Ballistic Rangefinder