Spartan Precision will be displaying their revolutionary bipod and tripod systems in booth #14538 during SHOT Show 2025. Swing by and see their highly adaptable, TAA compliant, defense line with Quantico Tactical during the show.
Archive for the ‘Press Release’ Category
Come See Spartan Precision at SHOT Show 2025
Saturday, January 18th, 2025American Suppressor Association Issues Statement of Support for Hearing Protection Act Reintroduction
Saturday, January 18th, 2025WASHINGTON, D.C. – Today, the American Suppressor Association (ASA), issued a statement of support for the introduction of the Hearing Protection Act for the 119th Congress by U.S. Representative Ben Cline.
“The Hearing Protection Act is the epitome of commonsense legislation. Law-abiding citizens should not have to pay a tax to protect their hearing when they exercise their Second Amendment rights,” said Knox Williams, President and Executive Director of ASA. “The American Suppressor Association applauds Rep. Cline for his leadership and willingness to fight for the rights of gunowners across the United States. We look forward to continuing productive conversations with members of Congress and the incoming administration to ensure the best policy outcomes for the suppressor industry and entire gun-owning community.”
The Hearing Protection Act would remove suppressors from the burdensome requirements of the National Firearms Act (NFA) and require purchasers to pass an instant NICS check, the same background check used during the sale of long guns. This change will make it is easier for law-abiding hunters and sportsmen to access these hearing safety devices. Congressman Cline’s bill is an enhanced version of the HPA introduced in every Congress for the last decade. The legislation includes a technical change intended to clarify which part of a suppressor must be marked with a serial number.
Background
Suppressors have been federally regulated since the passage of the National Firearms Act of 1934.
In order to purchase a suppressor, prospective buyers must live in a state where suppressors are legal, send in an application including fingerprints and passport photos to the ATF, pay a $200 transfer tax, notify their local Chief Law Enforcement Officer (CLEO), and wait an indeterminate amount of time for ATF to process the application.
Using the same science as car mufflers, suppressors help reduce noise pollution, allowing hunters and recreational shooters to be good neighbors and good stewards of the environment.
Often referred to as “silencers,” suppressors are widely misunderstood by the public due to this misnomer. A suppressor only reduces the sound level of a gunshot to 110-120 decibels, about as loud as a jackhammer or ambulance siren.
Private suppressor ownership is currently legal in 42 states, and hunting with a suppressor is legal in 41 states.
For more information on the Hearing Protection Act and the American Suppressor Association, visit americansuppressorassociation.com.
Savage Arms Announces New Left-Handed Models
Saturday, January 18th, 2025WESTFIELD, Massachusetts – January 16, 2025 – Savage Arms®, an iconic firearm manufacturer, is excited to announce the availability of left-handed models of its 110 Trail Hunter and 110 Trail Hunter Lite.
“Savage Arms® is proud to offer left-handed models that cater to the diverse needs of our customers,” said Beth Shimanski, Director of Marketing at Savage Arms. “We understand that every shooter deserves the opportunity to enjoy our products, and we are thrilled to expand our lineup to include these new options.”
Savage debuted the 110 Trail Hunter in late 2023 as a collaboration with Hogue and quickly followed it with the 110 Trail Hunter Lite in 2024. Hogue Overmolded rifle stocks have long been known to provide outstanding performance and grip. The Cerakote ceramic coating on the barreled action helps to seal out the worst that mother nature can dish out. These rifles help fill tags despite the weather or hunting conditions.
Product No. / Description / MSRP
58301 / 110 Trail Hunter LH 243 Win / $639
58302 / 110 Trail Hunter LH 6.5 Creedmoor / $639
58303 / 110 Trail Hunter LH 308 Win / $639
58304 / 110 Trail Hunter LH 350 Legend / $639
58305 / 110 Trail Hunter LH 400 Legend / $639
58306 / 110 Trail Hunter LH 270 Win / $639
58307 / 110 Trail Hunter LH 30-06 Spfd / $639
58308 / 110 Trail Hunter LH 7mm PRC / $639
58309 / 110 Trail Hunter LH 300 WM / $639
58310 / 110 Trail Hunter Lite LH 243 Win / $669
58311 / 110 Trail Hunter Lite LH 6.5 Creedmoor / $669
58312 / 110 Trail Hunter Lite LH 308 Win / $669
58313 / 110 Trail Hunter Lite LH 350 Legend / $669
58314 / 110 Trail Hunter Lite LH 400 Legend / $669
58315 / 110 Trail Hunter Lite LH 270 Win / $669
58316 / 110 Trail Hunter Lite LH 30-06 Spfd / $669
58317 / 110 Trail Hunter Lite LH 7mm PRC / $669
58318 / 110 Trail Hunter Lite LH 300 WM / $669
58236 / 110 Trail Hunter Lite LH 20” Barrel 7mm Backcountry / $669
58238 / 110 Trail Hunter Lite LH 16.5” Barrel 7mm Backcountry / $669
For more information about Savage Arms and its extensive line of leading firearms, visit savagearms.com.
Franklin Armory’s New Binary Trigger for FN SCAR
Friday, January 17th, 2025The New SKR-C1 Gives FN SCAR® Owners the Longed-for Ability to Fire on Both the Pull and Release Functions of The Venerable Gas Piston Semiautomatic Rifle
MINDEN, Nev. – January 16, 2025 – Franklin Armory, Inc., one of America’s most innovative manufacturers of firearms and accessories, announced today the latest model in the patented Binary Firing System® lineup. The new SKR-C1 is Franklin Armory’s first Binary® trigger for the popular FN SCAR®. Now, FN SCAR owners can experience the thrill of shooting in Binary mode that hundreds of thousands of Americans have come to enjoy on many other firearm platforms.
“From social media engagements to customer surveys, the FN SCAR consistently ranked among the most requested platforms for our next Binary trigger design,” said Franklin Armory President Jay Jacobson. “Our engineers enthusiastically pursued this project and did a fantastic job of adapting our Binary technology to the renowned SCAR platform.”
Franklin Armory’s new SKR-C1 provides the same three-position selectable functionality found in all of its Binary® triggers for rifles and pistol caliber carbines: Position One, safe; Position Two, traditional semiautomatic; Position Three, Binary®. In Binary mode, a single round is fired when the trigger is pulled and a single round is fired when the trigger is released. One of the Binary Firing System’s revered safety features is the ability to cancel the release round by simply moving the integrated selector switch from Binary® to the “semi” or “safe” position before releasing the trigger. More information on the operation of the Binary Firing System can be viewed in the video “How Binary® Works.”
MSRP for the new SKR-C1 Binary Trigger for FN SCAR is $499.99. Franklin Armory anticipates shipping the SKR-C1 before end of the first quarter 2025.
For more information about the SKR-C1 Binary trigger for FN SCAR and other triggers in the patented Binary Firing System lineup, visit FranklinArmory.com. You can also keep up to date on new product announcements by following the organization on Facebook, Instagram, Twitter and YouTube. To inquire about testing and evaluation for Binary triggers and other Franklin Armory products, please email media@franklinarmory.com.
KGM Suppressors Unveils the FDP Suppressor with Fast Attach, Modular Design
Friday, January 17th, 2025January 17, 2025 – KGM Suppressors is proud to announce the official release of the highly anticipated FDP Suppressor model by FD Suppressors. Following a groundbreaking partnership revealed in 2024, the FDP Suppressor is set to enter production in Q1 2025, with shipments beginning in April 2025. This innovative product is a unique and capable suppressor that does not require a threaded barrel on a pistol host, instead attaching via a patented method that uses the accessory rails incorporated into a pistol’s frame.
As a part of US commercialization, the FDP Suppressor has a newly redesigned and modular mounting interface, specifically engineered to meet U.S. regulatory standards. This design allows users to have multiple unregulated adapters, enabling seamless compatibility with different host platforms. This updated design of the FDP Suppressor has been reviewed by the BATFE Firearms and Ammunition Technology Division (FATD), with approval received in December 2024.
MSRP for the FDP Suppressors is $750, with additional adapters available for an MSRP of $165.
Launch Configurations
The initial release of the FDP Suppressor includes adapters for the following host platforms:
• Glock 17 Gen 5
• Glock 17 Gen 3/4
• Glock 19 Gen 5/19X/45
• Glock 19 Gen 3/4
• HK VP9
Key Design Features
• Fast attach and removal design that does not require a threaded barrel.
• Does not require a Nielson device/booster for cycling.
• Does not affect cycling and reliability of the pistol, allowing maximum ammunition compatibility.
• Has minimal to no point-of-impact shift between suppressed and unsuppressed.
• Does not interfere with the vision of pistol sights.
• Offers comparable sound suppression to conventional pistol suppressors.
• Easy take-apart design for cleaning.
“The FDP Suppressor model is a uniquely capable suppressor that we are excited to bring to the US market,” said Sean Murphy, VP of Product Management. “After we signed the partnership with Fischer Development to bring their design to the US, we found a few design changes needed to meet US regulations. We are excited to have an approved modular mounting system so that users can customize their suppressor setup to fit their preferred host. Work is already underway for additional adapters that fit other popular pistol platforms.”
Availability and Ordering
The FDP Suppressor and its launch adapters will be available for pre-order starting February 2025, with shipments commencing in April 2025. Existing KGM Suppressors dealers will have access to this product, and interested FFL/SOTs are encouraged to inquire about dealer pricing. Additional adapter designs are already in development, ensuring continued expansion of compatibility options in the near future.
See the FDP Suppressor at SHOT Show in the KGM Suppressors booth, located in Caesar’s Forum at booth 75223.
For more information about the FDP Suppressor, its features, and availability, visit www.fd-suppressors.com or contact info@fd-suppressors.com.
Princeton Tec to Attend Industry Day at the Range 2025
Friday, January 17th, 2025PENNSAUKEN, N.J. – January 16, 2025 – Princeton Tec, a renowned provider of American-made quality outdoor and tactical lighting options, is excited to announce its attendance at the upcoming 2025 Industry Day at the Range in Boulder City, Nev. on January 20.
“We are thrilled to be a part of Industry Day at the Range this year,” said Princeton Tec Director of Marketing Kady Kolb. “This is a great opportunity for us to connect with industry professionals and showcase what is new and popular at Princeton Tec.”
Princeton Tec will be located at NS-21, in the non-shooting Pavillion area where attendees will find its most popular and newest, hunting and tactical technologies on display. Princeton Tec is proud to offer a variety of lighting products for outdoor, tactical, and military personnel across its product lineup, including its headlamps, helmet lights and more.
Industry Day at the Range takes place the day before SHOT Show and is the only range event officially associated with SHOT Show. This event is a great opportunity for registered media and buyers to get the first hands-on look at exclusive products before they hit the SHOT Show floor.
For more information on Princeton Tec, please visit www.princetontec.com or find Princeton Tec on Instagram and Facebook.
For more information about SHOT Show 2025, including exhibitors, schedules, events and partners please visit shotshow.org.
For more information about the 2025 SHOT Show Industry Day at the Range visit ShotShowRangeDay.com.
Smith & Wesson Releases No-Lock Classic Series Revolvers
Friday, January 17th, 2025MARYVILLE, TN., (1/16/2025) – Smith & Wesson Brands, Inc. (NASDAQ Global Select: SWBI), a leader in firearm manufacturing and design, announces today the release of three Classic Series No-Lock revolvers that include a Model 36, Model 10, and Model 19.
Crafted with the finest materials and precision engineering, this new line of revolvers displays iconic features, now enhanced to meet the demands of today’s shooters. Leading off this new line is the S&W® Model 36 Classic, a J-Frame chambered in 38 Special +P that has a 5-shot capacity, which includes a 1.88-inch barrel with a fixed blade front sight, an integral slot-in-frame rear sight, and a classic checkered wood grip. Its design also incorporates a blued carbon steel frame and cylinder, which not only enhance its visual appeal but also provides durability.
Moving on to the K-Frames, this series offers two 6-shot revolvers, the S&W® Model 10 Classic chambered in 38 Special +P and the S&W® Model 19 Classic chambered in .357 Magnum. The new Model 10 includes a 4-inch barrel with a fixed blade front sight, an integral slot-in-frame rear sight, blued carbon steel frame and cylinder, and high-grade Tyler Gun Works walnut grips. If you prefer a .357 magnum, the new Model 19 Classic is a great one add to the collection. It features a 4.25-inch barrel with a red ramp insert front sight, adjustable black blade rear sight, blued carbon steel frame and cylinder, and is completed with a time-honored checkered wood grip.
All three of these exciting new Classic Series revolvers exhibit unique characteristics, but they also share similarities. Some features shared across the series include a traditional frame with no internal lock, a single or double action firing capability, and smooth trigger pull for reliable performance. Experience the perfect blend of timeless elegance and cutting-edge technology with Smith & Wesson Classics, and elevate your collection with unmatched quality and heritage.
For more information on the new Smith & Wesson Classic Series revolvers, visit www.smith-wesson.com.
Qore Performance releases ICEBLOQ Water Tamped Breaching Device
Friday, January 17th, 2025Qore Performance releases ICEBLOQ Water Tamped Breaching Device Knoxville, TN – Qore Performance, in partnership with K-Factor Breaching, introduces an innovative tool for military and SWAT breachers: ICEBLOQ Water Tamped Breaching Device. Designed to improve energetic efficiency, ICEBLOQ delivers reliable performance, and safety, offering a new approach to precision in breaching operations.
In high-stakes environments where every decision matters, ICEBLOQ equips breaching professionals with the tools to execute their missions with predictability and consistency. Its thoughtful design promotes consistent, repeatable results while reducing potential risks.
How ICEBLOQ Works ICEBLOQ utilizes water as a tamping medium to channel explosive energy more effectively into the target. ICEBLOQ enhances breaching operations with increased efficiency and safety by reducing explosive requirements and lowering environmental impact.
Key Features and Benefits of ICEBLOQ:
• Reduction in Explosive Requirements: Lowers Net Explosive Weight (N.E.W.) by an average of 60%, helping to reduce operational costs and risks.
• Improved Breaching Effectiveness: Water’s incompressibility channels explosive energy into the breach point for better results.
• Enhanced Operator Safety: Reduces overpressure, backblast, and fragmentation risks, offering greater protection in live scenarios.
• Durability and Portability: Built to exceed the performance of improvised alternatives, ICEBLOQ is highly portable and dependable.
• Consistent Performance: Thoroughly tested for predictable and repeatable results, suitable for training and operational use.
“Breaching is about creativity, physics, and the materials at hand-but every choice adds a layer of risk, ” said Will Amey, Retired Marine Gunner and Infantry SME at Qore Performance, Inc. “ICEBLOQ’s consistent performance significantly reduces that risk. Once you test it on the range, you’ll see its value.”
Whether honing skills in training or deploying in the field, the ICEBLOQ Water Tamped Breaching Device offers reliable, repeatable performance. It is a significant advancement in breaching technology, combining safety, efficiency, and precision to meet the needs of modern operators.
ICEBLOQ is proudly 100% Made in the USA, distributed from Qore Performance HQ2 inKnoxville, TN, and available now exclusively at QorePerformance.com.
