GORE-TEX Professional

Archive for the ‘Press Release’ Category

Combat Flip Flops Releases the 100% Afghan Cashmere Shemagh

Wednesday, September 13th, 2023

This 100% Afghan Cashmere Shemagh is sourced and loomed in Kabul, Afghanistan. Prior to the fall of Kabul, Combat Flip Flops worked to set up a full supply chain in Afghanistan to support cashmere goat herders, workers to harvest the material, and looms to weave the finest scarf on the market.

Two weeks prior to the fall of Afghanistan, Combat Flip Flops received the first samples, then everything fell apart…

” ‘SURRENDER’ IS NOT A RANGER WORD.”

While the rest of the world gave up on our Afghan partners, Combat Flip Flops didn’t. After two years of navigating every problem you could imagine in Afghanistan while enduring a significant tactical pause, the Kabul team is finally back to work.

$149.99

CombatFlipFlops.com

Made in Afghanistan Colors: Black, Grey, Coyote 44″x44″

100% Afghan Cashmere

Drone Evolution Launches Sentinel TetheredUAV at DSEI 2023

Tuesday, September 12th, 2023

London, 12 September, 2023: Drone Evolution launches SENTINEL, its new, tethered Unmanned Aerial Vehicle (UAV) system at DSEI 2023. Designed and built in the UK, SENTINEL has been teamed with Steatite’s MPU5 MESH radio, creating an airborne rebroadcasting node which provides a persistent surveillance capability for situational awareness. The SENTINEL tether system is quicker to deploy and lighter to carry than a mast option. The combination of a tethered UAV system and radio/camera/thermal imaging system is ideal for applications such as:

• Intelligence, surveillance & reconnaissance

• Force protection

• Event security

SENTINEL can be powered by Drone Evolution’s patented Freedom Power Supply Unit (PSU). This PSU can output 100V-500V from a 12V or 24V vehicle power supply, allowing SENTINEL to be mobilised and remain airborne for extended periods of time, reaching heights of 50m for 6 hours and potentially beyond. SENTINEL is the only system capable of running directly from a 12v or 24v power supply such as a vehicle or batteries (with no inverter or generator required) as well as mains power. Additionally, SENTINEL’s weatherproofing and high wind resistance allows for long endurance in challenging environments.

With both SENTINEL and Dis1 radios operating at ground level, it is possible to establish a baseline range to determine the range and throughput of a Wave Relay point-to-point network in an urban environment.

Toby Townrow, Communications Director at Drone Evolution, said: “Tethering a drone to a ground power source allows the system to be in the air for periods far beyond conventional battery life. SENTINEL really is a game changer, it can be deployed without advanced pilot skills and has the potential for secure communications and overcoming blackspots. Additionally, SENTINEL can take your sensors to greater heights than a standard temporary mast system can ever achieve.”

Steatite’s Business Development Manager, Seb Leaver, added “The combination of Drone Evolution’s SENTINEL system and the MPU5 Radio System provides a solution to a challenge that our clients have had for a long time – namely how to get a comms rebroadcast system to a height quickly and easily for a range of deployment types at a price that doesn’t make to prohibitive.”

See Drone Evolution’s SENTINEL on Steatite’s stand H2-417.

Microdrones Offers The First Complete NDAA-Compliant LiDAR Drone Surveying System

Tuesday, September 12th, 2023

EasyOneLiDAR NDAA is An Ideal System For DOT, Government, and Data Security Sensitive Requirements

September 6, 2023

Las Vegas, NV- Long a popular event to announce the latest developments in drone surveying technology, the bustling Commercial UAV Expo provided the perfect forum to present forthcoming equipment from Microdrones. Vivien Heriard Dubreuil, CEO of mdGroup (parent company of Microdrones) explained “EasyOneLiDAR NDAA provides all of the convenience, ease of use, small form factor and accuracy of our EasyOne system, but this version is NDAA compliant, including the LiDAR and imaging payload.”

Vincent Legrand, VP of Sales for Microdrones added, “When we launched our EasyOne system earlier this year, we saw some big interest from public enterprises, but they needed full NDAA-compliance. That’s why we are so pleased to announce EasyOneLiDAR NDAA. It’s the first complete solution of its kind to hit the market with NDAA-compliance.”

To achieve NDAA-compliance, the Microdrones team developed a new ground control system and LiDAR payload.


Pictured above: EasyOneLiDAR NDAA is integrated with a new ground control system.

EasyOneLiDAR NDAA features a new LiDAR sensor with 128 channels and Triple 1’’ cameras with mechanical shutters, providing RGB 60 MP combined resolution.


Pictured above: EasyOneLiDAR NDAA features a new LiDAR sensor with 128 channels and Triple 1’’ cameras with mechanical shutters, providing RGB 60 MP combined resolution.

Legrand concluded, “We are taking pre orders now, for delivery in October; interest has been high and we anticipate strong ordering activity in Q4 for this system. There is some pent up demand for something like this in the market.”

To learn more about Microdrones, visit www.microdrones.com.

To learn more about GeoCue, visit www.geocue.com.

Schuberth GmbH Supplies New M100 Ballistic Helmet to Swiss and Romanian Special Forces

Tuesday, September 12th, 2023

Magdeburg, September 11, 2023 – Head protection specialist SCHUBERTH GmbH from Magdeburg/ Germany has won a tender for ballistic protective helmets from the Romanian Ministry of Defense and a Swiss special forces unit. Both contracts will be delivered via sales partner Alpine Fox in Switzerland and Rotman Industries SRL in Romania before the end of this year.

Milad Youkhanna, Head of the Business Unit Military & Law Enforcement at SCHUBERTH, explains: “We are extremely proud to count the special forces of the Romanian Ministry of Defense and a Swiss police SF unit among our customers. The SCHUBERTH M100 ballistic protective helmet won against an international field of bidders in a call for tenders. In addition to the innovative features and outstanding ballistic protection, the high performance of our product in the maritime environment and the extremely low signature resulting in low detectability by night vision equipment were of particular importance to the Romanian customer. The numerous design and development loops, which were repeatedly tested by members of a wide range of European units, are now showing their value.”

BALLISTIC HEAD PROTECTION SYSTEM M100

The SCHUBERTH M100 is a modern combat helmet with superior wearing comfort and a high level of ballistic protection. Thanks to its open-architecture rail system and adjustable interior lining, it offers outstanding performance in all scenarios or threat levels. An above- average proportion of common parts across all sizes and optimized serviceability guarantee low life cycle costs and a high level of sustainability.

The advanced helmet shell technology provides a balanced blend of the highest protection and material composition that is not only durable and resistant, but also allows the helmet to be fully repaired. The M100 combines ballistic protection according to NIJ IIIA as well as VPAM 2 (5 cm edge impact) with the demanding impact absorption according to the climbing helmet standard EN 12492, the white-water helmet standard EN 1385, as well as the industrial safety standard EN 397.

Available in High-, Mid- or Fullcut, the M100 is characterized by its cross-manufacturer compatibility with headsets and communication solutions. The patented Ergonomic Headset Loop (EHL), developed specifically for the M100, is a webbing guide with rigidly designed segments that frames the headset, ensuring a perfect fit even during dynamic activities. This is complemented by the also patented Divided Modular Liner (DML), a two-piece headgear ring that not only allows the earpiece to fit perfectly under the helmet, but also enables individually adjusted to the shape of the user’s head.

The Device Connection Interface System (DCIS) of the SCHUBERTH M100 features a rear rail in addition to the side rail pair and a night vision shroud. This open system architecture provides room for capability development that already require compatibility with peripheral devices to be procured in the future. Additionally, a completely new dimension in the integration and management of peripheral devices is made possible by the specially developed SCHUBERTH Extended Connection Devices (ECD). These connections, which are distributed across all interfaces, not only permit a previously unknown level of advanced cable management, but also the integration of additional accessories such as lamps, covers or artificial camouflage elements.

www.schuberth.com

FN Releases Limited Production of SCAR 17S DMR in 6.5 Creedmoor

Tuesday, September 12th, 2023

(September 12, 2023 – McLean, VA) FN America, LLC is pleased to announce the release of a limited production of the FN SCAR® 17S Designated Marksman Rifle, or DMR, chambered in 6.5 Creedmoor. The mid-range designated marksman configuration brings the 6.5CM caliber to the SCAR 17S platform for the first time and delivers an impressive, multi-purpose rifle enhanced to take advantage of the inherent accuracy and multi-role capability of the SCAR platform. The SCAR 17S in the DMR configuration features premium upgrades, including the precision buttstock assembly and Geissele 2-stage trigger that SCAR 20S owners rely on for surgical accuracy.

“The SCAR is the most tested rifle platform that FN has ever developed. It was designed to be lightweight, rugged, accurate and modular to give the user a rifle platform that could be configured to their needs,” said Chris Cole, Vice President of Sales for FN America, LLC. “This new and limited-time build demonstrates the modularity of the SCAR design by combining features of the SCAR 17S heavy carbine and the SCAR 20S precision rifle to create a one-of-a-kind, mid-range designated marksman rifle.”

The FN SCAR 17S DMR 6.5CM is upgraded from the standard carbine configuration with the addition of the SSR Rear Stock and Geissele SuperSCAR two-stage trigger. These upgrades, combined with match-grade ammunition and optics, enable greater precision for long range target engagements. The 16.25-inch 6.5 Creedmoor barrel is cold hammer-forged and chrome-lined for extreme durability and enduring accuracy, and features a 1:8-in twist, standard carbine profile and muzzle device. With a lighter weight barrel, the DMR handles swiftly and transitions to targets quickly, just like the SCAR 17S heavy carbine chambered in 7.62×51 NATO.

The monolithic aluminum receiver features MIL-STD-1913 Picatinny rails to mount optics and accessories, as well as the SCAR-signature flip-up front and rear adjustable iron sights. The receiver is equipped with dual, non-reciprocating charging handles located on both sides of the rifle that are user-configurable for position and remain locked forward during fire. 

Specifications:

• Caliber: 6.5 Creedmoor
• Capacity: 10- or 20-rds; Ships with (1) 10-round SCAR-H Magazine
• Weight: 9.5 pounds
• Length: 36.8-38.6 inches
• Barrel: 16.25 inches; Cold Hammer-forged, Chrome-lined; 1:8 twist
• Operation: Short Stroke Gas Piston; Non-reciprocating Charging Handles
• Finish: Black or Flat Dark Earth (FDE)
• Sights: MIL-STD-1913 Picatinny Rail; Flip-up Iron Sights

The legendary FN SCAR series takes root in its battle-proven lineage, adapted from USSOCOM’s newest battle rifle since the M4 entered service in the 1990’s. The benchmark of reliability and versatility with its four variants, the FN SCAR 15P, SCAR 16S, SCAR 17S and SCAR 20S are capable of consistent accuracy from their cold hammer-forged and chrome-lined barrels and one-piece forged aluminum receiver, low-flash gas regulator and fast-handling characteristics uncommon in similar rifle platforms.

To learn more about this limited release of the FN SCAR 17S DMR chambered in 6.5 Creedmoor, please visit fnamerica.com.

Galvion’s Ongoing NATO and European Successes Trigger Expansion Plans for a European Production Hub in Poland

Tuesday, September 12th, 2023

Galvion, a world leader in innovative head protection systems and power and data management solutions, has announced the establishment of a European Production Hub in Poland. Driven by Galvion’s ongoing successes in NATO and the wider European regions, the new facility will be based in Gdansk is expected to be operational by Q1 of 2024.

Galvion’s Polish investment plan was announced at a lunchtime VIP briefing in Gdansk on Friday 8th September 2023. This announcement coincides with the DSEI exhibition taking place in London, 12-15 September, where Galvion are exhibiting at booth H4-711.

Following recent consecutive contract awards for key European nations, Galvion is expecting to have close to 1.5 million helmets in service across NATO and other European countries by 2025. Galvion’s new Gdansk facility will initially house helmet finishing and assembly capabilities, in addition to critical support, maintenance, refurbishment, upgrade and training operations. The Gdansk location was chosen following a comprehensive search and assessment period, and the functionality of the facility is expected to expand through 2026 and beyond in order to support Galvion’s full product and solutions portfolio. Galvion’s existing core facilities in Canada and the USA will continue to design, develop, manufacture and service domestic, regional, and key global programs, customers, production and support requirements.

Jonathan Blanshay, Executive Chairman of the Board at Galvion said: “Today’s announcement represents a bold but necessary next step forward for the company. It is indicative of our commitment to delivering value for our global partners and programs, with an emphasis on responsible regional operations, as well as diverse through-life management, service and support opportunities. Getting our best-in-class protective and performance-enhancing equipment out to those who need it is our priority. By expanding our footprint to the European continent, we will be able to sharpen the focus of our manufacturing and support facilities around the world to enhance delivery, responsiveness, and supportability for all of our customers.”

He added, “We have been impressed by the Polish authorities’ receptiveness and assistance in our search, and we would specifically like to thank the office of the Marshal of Pomerania, the Polish Investment and Trade Agency, the Pomeranian Development Agency, the Gdansk City Council and the Regional Development Agency, Invest in Pomerania, for their ongoing interest and support.”

Halo International Limited Agrees on the Purchase of Shares of tactical Equipment Provider, Helix Operations Limited

Tuesday, September 12th, 2023

Halo International Limited is set to acquire shares of tactical equipment provider, Helix Operations Limited, through an agreement with Excalibur Ltd, reinforcing its commitment to enhancing its product portfolio and market presence.

Halo, owner of Brigantes Consulting Ltd, has recently confirmed an agreement for the acquisition of shares of Helix. 

Halo is the parent company of on-the-soldier equipment provider, Brigantes Consulting Ltd. Combining decades of military experience with keen technical expertise and advanced industry awareness, Brigantes are the go-to specialist for on-the-soldier equipment. With a product range that spans apparel, footwear, vertical movement, signature management, technology, mobility, and sustainment. Founded in 2014 by ex-military personnel, Brigantes unites decades of military experience with advanced technical expertise, cementing itself as a trusted international supplier to NATO military, government, and elite police units. Through unique alliances with world-leading brands, Brigantes pioneers the latest, bleeding-edge equipment solutions in state-of-the-art soldier systems for every conceivable operational environment.

Tactical equipment and training provider, Helix is a Wales-based company that specialises in the provision of tactical mountaineering and climbing equipment. Helix provides the complete capability for vertical access and rescue in mountain, maritime and urban environments. With headquarters in the north Welsh mountains, Helix has over 30 years of experience in the supply of tactical climbing solutions. Their customer base includes the UK MOD and several NATO forces. In addition to the provision of expert equipment, Helix also provides externally accredited training programmes that incorporate best practices from industry and operational environments. Helix cooperates closely with teams to develop bespoke systems that are fit for purpose for tactical use – deploying quickly and discreetly and can work with incumbent military equipment.

Having worked together for several years, Brigantes and Helix are closely aligned in terms of product focus and customer base. This latest development represents a natural continuation of the longstanding partnership and a significant opportunity for expansion into global markets. Brigantes’ first-hand experience of military operations and on-the-soldier equipment solutions unite seamlessly with Helix’s acute understanding of tactical mobility systems, particularly in the context of vertical movement, rescue and mountaineering equipment. 

Matt Williams, Halo International CEO, commented:

“Brigantes has worked very closely with Helix for many years on the provision of tactical equipment solutions and training for mountaineering and vertical access. Their expertise in this realm is unparalleled and so this agreement made complete sense and will enable us to move up a gear, enhancing our existing specialisms with even more bespoke knowledge and expanding our offering to worldwide markets.”

This acquisition represents a continuation of Halo’s strategic vision. By leveraging the international potential and unique tactical equipment and training expertise supplied by Helix, Halo will drive innovation and value for Brigantes’ military customers, further solidifying its position as an industry leader in the provision of on-the-soldier equipment. 

The combined strengths of the Halo Group and Helix will result in a stronger, more diversified market presence, delivering exceptional procurement knowledge, robust testing capabilities and quality training opportunities for their customer base. This acquisition sparks huge potential for further growth and development for both entities, uniting specialised expertise and industry experience across adjacent sectors to deliver an enhanced offering for military customers across the globe. 

B.E. Meyers & Co Exhibiting at Maneuver Warfighter Expo 2023, Ft Moore (Benning), GAm

Tuesday, September 12th, 2023

September 8, 2023 (Redmond, WA) – B.E. Meyers & Co., Inc., a defense technology manufacturer specializing in advanced photonics solutions for military, law enforcement, consumer, and aerospace applications worldwide, will be exhibiting at the Maneuver Warfighter Conference on September 1214, booth #25 at the McGinnis-Wickam Hall (BLDG 4), Fort Moore (Benning), GA.

B.E. Meyers & Co. will be showcasing their United States Department of Defense-specific variant of their Modular Advanced Weapon Laser (MAWL), the MAWL®-X1, a high-powered infrared and visible green multi-function aiming and illumination laser designed for individual carbines and crew served weapons. It has been engineered from the ground up to exceed the needs of the modern night fighter. Also being showcased is the PEO Soldier adopted  BOARS®-M2, (NSN) 1240-01-682-8650, a modular, low-profile optics and accessory mounting solution for the M2 series of .50 Cal crew-served weapons that offers a quick-disconnect with true return-to-zero reattach capability. Other products on display will include the KIJI, a powerful but non-restricted Class 3R device with a modular design utilizing a VCSEL-based infrared laser illuminator that can be rail mounted on a wide variety of systems including individual weapons, shoulder-fired anti-tank rockets (i.e. AT-4) and spotting scopes, as well as helmet-mounted for aid in night vision navigation.  The KIJI can also be used in a

handheld configuration in support of aviation applications and has been used by pilots and crew to provide clear and bright infrared illumination to identify ground HLZ hazards and communicate with ground personnel.

To schedule a meeting with a member of the B.E. Meyers & Co. team at Maneuver Warfighter Expo, please contact info@bemeyers.com.

For more information about B.E. Meyers & Co. products and our 49-year history, please visit us at www.bemeyers.com