Press Release | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Press Release’ Category

New MOA and Metric Targets by Rite in the Rain, Precision in Zeroing

Friday, November 6th, 2020

TACOMA, WA – November 5, 2020 – Rite in the Rain® is proud to announce two new zeroing targets, Target product numbers: #9129 (MOA) and #9130 (MIL).

Both targets are produced on proprietary Rite in the Rain® cardstock paper, removing any concern of targets falling apart under adverse weather conditions. In addition, the targets present clean bullet holes for ease of analyzing shot groups or scoring targets.

Rite in the Rain® Product #9129 (NSN 6920-01-660-0348), is an improved A8 Target, based on the original US Army A8 featured in Training Circular (TC) 3-22.9. Designed to make subtle, yet substantive improvements to an already superior design. The improvements are functional and aesthetic. The # 9129 target design is subdued to present a cleaner target presentation for shooters, proving a better focus on the center of visible mass and providing a more useable scoring target for short range marksmanship training. The zeroing adjustment grid is upgraded, using true minute of angle (MOA) in place of shooter MOA. This allows greater fidelity in making sight adjustments. #9129 offers a more precise zero, with less time and ammunition expended. The final improvement is the addition of directional arrows, to show sight correction directions.

Rite in the Rain® Product #9130, eliminates the need for Soldiers to calculate their mean point of impact (MPI), adjustment in MOA, and conversion into mils. The .1 mil grid is designed to facilitate zeroing aiming devices with adjustments in mils for the following weapons:

-AN/PEQ-15/15A, M-249 Iron Sights

-M145 Machine Gun Optic

-SIG Tango 6 optic used with the M-110A1 Squad Designated Marksman Rifle (SDM-R)

Product #9129 can be ordered by NSN 6920-01-660-0348, through normal supply channels.

Both Product #9129 and #9130 can also be ordered through GSA advantage or directly from Rite in the Rain® at riteintherain.com.

Produced in collaboration with Canebrake Consulting. Proudly USA Made!

Posted in Press Release, Training | Comments Off on New MOA and Metric Targets by Rite in the Rain, Precision in Zeroing

Elistair Unveils Long-Endurance Orion 2 Tethered Drone for Military, Security, and Industrial Use

Friday, November 6th, 2020

LYON, France — Elistair, a leader in tethered drone solutions, announced today the development of its new Orion 2 tethered unmanned system for military, government, and industry users. Unlike other multi-rotor drones, the Orion 2 hexacopter delivers round-the-clock surveillance for up to 24 hours at a time, making it a true persistent surveillance platform.

“For example, we made it IP54; we optimized the lifespan of the components, including the motors; and we added a safety battery that could recharge in the air.”

“Small, unmanned multi-rotor systems are great if you want a hover-and-stare capability, but they’re also notoriously short on battery life,” said Timothée Penet, CTO and co-founder of Elistair. “Powered tethering stations, like our Safe 2 and Ligh-T 4, offer a solution by increasing a platform’s time in the air—and that’s great for many missions. But what if you need to be on station for a whole day?”

That is where Elistair’s own Orion 2 comes into the picture.

A lightweight yet extremely durable hexacopter, the Orion 2 is designed as a quick-deploy system (automated push-button takeoff and landing) that can stay in the air for 24 hours—something that, previously, could only be done by a helium-filled tactical aerostat, which was a much larger platform and came with a very complicated logistical train.

“We developed redundancies at every level to ensure that the Orion 2 could stay up that long,” said Pierre-Moana Levesque, R&D Director at Elistair. “For example, we made it IP54; we optimized the lifespan of the components, including the motors; and we added a safety battery that could recharge in the air.”

The new Orion 2 is an improvement over the original Orion drone, which has already proven itself with international customers. The Orion helped secure the Ryder Cup in September 2018, flying over crowds of 300,000 attendees for 8 to 11 hours a day, and has been employed by the French police, British military, and Singaporean government.

With its micro-tether of 330 feet (100 meters), the Orion 2 flies higher than its predecessor and surveils more ground. It can also carry up to 2kg (4.5 pounds) of payload, so it can serve simultaneously as an ISR and telecom platform. The Orion 2 can also stream georeferenced electro-optical and infrared imagery at the same time, and it can deploy 4G/5G communications nodes thanks to a new fiber optics cable option.

“The Orion 2 tethered drone is a clear advance over the very capable Orion in terms of persistence, logistical footprint, and data control. We are thrilled by this product launch,” said Guilhem de Marliave, CEO and co-founder of Elistair.

Posted in Press Release, UAS | 1 Comment »

L3Harris Technologies Receives First Delivery Order for the US Army’s Next Generation Rifle-Mounted Aiming Laser

Thursday, November 5th, 2020

Highlights:
• The first production delivery order for the STORM 2 contract
• The company will deliver more than 1,100 combat-ready systems to the U.S. Army
• STORM 2 enables a soldier to perform laser ranging and target hand-off operations in all battlefield conditions

LONDONDERRY, N.H., Nov. 5, 2020 — L3Harris Technologies (NYSE:LHX) has received the first order on its multi-million dollar contract from the U.S. Army for the Small Tactical Optical Rifle-Mounted Micro Laser Rangefinder 2 (STORM 2). L3Harris will deliver more than 1,100 combat-ready systems to the Army. This is the first production delivery order associated with the $215 million STORM 2 contract the company announced in 2019.

“STORM 2 represents a next-generation laser technology that enables the soldier to perform laser ranging and target hand-off operations in all battlefield conditions,” said Lynn Bollengier, President, Integrated Vision Solutions, L3Harris. “Our STORM portfolio has been a staple of the U.S. Army’s laser rangefinding capabilities for more than 15 years and we are proud to continue delivering combat-ready systems that provide a tactical edge for our soldiers.”

The company’s STORM 2 is the next advancement in rifle-mounted, multifunction laser systems that provide soldiers with heightened performance and enhanced visibility at extended range during field maneuvers, surveillance and engagement, while remaining undetected during dismounted and vehicle- mounted missions.

www.l3harris.com

Posted in Contracts, Optics, Press Release | 3 Comments »

True North Concepts, LLC Announces the “Early Bird” Holiday Sale with the Introduction of Two New Products

Thursday, November 5th, 2020

True North Concepts recognizes that this holiday shopping season will rely heavily on online shopping, with shipping delays a likely, if not probable side effect of overcommitted package carriers. TNC has decided to kick “Black Friday” off a few weeks early, to help ensure customers receive their purchases well before the rush. With the popularity of the Modular Holster Adapter, TNC has received numerous customer requests to expand the MHA’s compatibility past those only using Safariland® 3-hole pattern holsters with additional common holsters. The first such additions are for G-Code® and Blackhawk® holster configurations.

T-Series Adapter

The new MHA Blackhawk T-series adapter plate allows shooters to use the True North Concepts Modular Holster Adapter with popular holsters such as the Blackhawk Omnivore. This adapter bolts onto the holster, and then onto the MHA. An added benefit of this adapter is that it will allow T-series holster users the ability to attach the proven Safariland QLS quick detach system for use in conjunction with the MHA. Each T-series adapter is made from the same rugged USA produced 6061 T-6 Aluminum as the MHA and is MILSPEC Type 3 hard coat anodized for superior corrosion and abrasion resistance. Simply mount the lightweight adapter with the included hardware to the holster and then mount the assembly to the MHA. This set up provides all of the same height and cant adjustment advantages the standard MHA provides over other systems.

Specs:
• MILSPEC Type 3 Hard coat anodized black finish
• 6061 T6 Contruction
• 0.5 oz weight
• Assembly hardware kit included
• Made in the USA

MSRP: $25.99

truenorth-usa.com/product/mha-blackhawk-t-series-adapter ?

G-Code Adapter

The G-CODE Holster RTI Adapter Plate allows shooters to use the popular G-CODE RTI quick detach system in conjunction with the TNC Modular Holster Adapter. Each RTI adapter is made from the same rugged USA-produced 6061 T-6 Aluminum, as the MHA and is MILSPEC Type 3 hard coat anodized for superior corrosion and abrasion resistance. Simply mount your polymer RTI wheel onto our lightweight adapter with the included hardware, and then mount the assembly to our MHA. Enjoy the all of same height and cant adjustment advantages the standard MHA provides. Increase the flexibility of the MHA system with the addition of our RTI adapter plate.

Specs:
• MILSPEC Type 3 Hard coat anodized black finish
• 6061 T6 Construction
• 0.7 oz weight
• Assembly hardware kit included
• Made In the USA
• RTI wheel not included
• MSRP: $25.99

truenorth-usa.com/product/g-code-adapter

The True North Concepts holiday sale begins at 1200pm EST November 6th, and runs until midnight Thursday, November 12th. Customers can use the code: EARLYBIRD to enjoy 10% off with free shipping, storewide. For more information, visit www.truenorth-usa.com

Posted in Holsters, Press Release | 3 Comments »

Shield Sights Announces Next Generation RMS2

Wednesday, November 4th, 2020

For Immediate Release – Dorset, England, U.K. – Shield Sights, Pioneer of compact micro red dot optics is pleased to present the newest edition of Refex Mini Sight, the RMS2.

Building on the foundation of the original RMS, that was designed for competitive shooters, the RMS2 brings features that increase performance for the defensive carry, shooting enthusiasts, and competitors alike. The Shield RMS2 features a strengthened lens housing and updated electronics with improved battery contacts to further enhance reliability under all conditions. The same glass coated polymer lens continues to provide a good balance of being shatterproof while remaining more scratch resistant than an all polymer lens option. Customers have the option to upgrade to an all glass lens if maximum scratch resistance is required.

The RMS2 has been designed without a battery draw to further strengthen the housing and remove any additional failure points in an EDC product. Shields superior footprint includes four location posts and two screws to ensure a consistent and secure interface to hold the sight in place. This system has been proven to be extremely repeatable when sights are removed to renew batteries and when combined with a long battery life has removed the need for the side access battery drawer.

“The explosive growth in the RDS market for concealed carry and general range use has presented new variables that we were eager to consider in the design of the RMS2,” said James White, CEO Shield Sights. “The advancements in technology and additional research in the field has given us the ability to design and deliver an overall better product for the majority of RDS shooters out there”

RMS2 Features:
– Shield footprint
– Glass coated polymer lens (can be upgrade to all Glass)
– Strengthened lens housing
– Updated electronics
– 4 MOA and 8 MOA dot options
– 1-3 year battery life

The RMS2 is currently available for sale through the Shield dealer network or on the Shield website: www.shieldpsd.com

MSRP: $430

Posted in Optics, Press Release | 3 Comments »

MasterPiece Arms (MPA) Unveils the MPA AR9 PCC (Pistol Caliber Carbine)

Wednesday, November 4th, 2020

Designed specifically for superior reliability and maximum accuracy by competition shooters for all-out performance, the MPA AR9 PCC is still capable of in-home personal defense and other tactical situations.

Comer, Ga. (November 2020) – MasterPiece Arms (MPA), manufacturers of the MPA BA Rifles and Chassis Systems, is pleased to introduce the MasterPiece Arms AR9 PCC (Pistol Caliber Carbine). Specifically designed for superior reliability and maximum accuracy, the AR9 PCC still retains the familiar handling and controls of the AR platform. This outstanding carbine was designed by competition shooters for maximum performance but is still capable of in-home personal defense and other tactical situations. The AR9 PCC is the first release from MPA’s recent product line acquisition from CK Arms.

The MPA design team has designed the MPA AR9 PCC lower receiver to be compatible with the GLOCK pattern magazines in 9mm. The new 7075 billet-machined aluminum receiver models also accept standard AR accessories like furniture, triggers, charging handles, buttstocks, and optics, and incorporate an integral trigger guard and flared magwell for fast reloading.

The MPA AR9 PCC closed-bolt blowback operating system is soft shooting and reliable with a wide variety of 9mm loads and exhibits flawless feeding with all common pistol bullet profiles, including hollow point and ball ammunition. The AR9 PCC proprietary bolt carrier group with heavy duty claw extractor and plunger ejector is tuned for exceptional reliability and has been optimized in weight for less reciprocating mass, which equals a flatter and softer shooting platform.

During the test and evaluation process, multiple buffers and recoil systems were tested and evaluated. MPA chose the best performing combination that enhanced the shootability of the rifle that puts it a tier above the competition. The AR9 PCC is also an excellent suppressor host with minimal gas blowback and enhanced accuracy over the other designs. Like all of its rifle products, MPA uses 416R SS match-grade button-rifled 1-10” twist 9mm barrels to ensure that the AR9 PCC meets MPA’s stringent quality and accuracy requirements.

MPA AR9 PCC Specifications:
• Billet machined lower from 7075 aluminum
• Caliber specific upper with a flared ejection port
• Hard coat black anodized (type 3) and Cerakoted
• Enhanced magwell for easy magazine loading
• 16” lightweight 416R stainless steel barrel, 1:10 Twist
• Anodized low profile handguard and buffer tube
• Multi-port steel Cerakoted compensator
• Optimized buffer and recoil system
• Machined aluminum S2 Grip
• Match grade accuracy
• Suppressor ready
• ½-36 TPI muzzle threads
• Competition ready
• Adjustable buttstock
• GLOCK style 17 round Magpul magazine included (PMAG17 GL9)
• Rifle Weight 6.25 lbs.
• Available in black, blue, red, and green
• MPA Lifetime Warranty
• MSRP $1,499.99

MPA makes every effort to get the product to the customer as quickly as possible. These are hand-built precision instruments and not production components. To see MPA’s latest delivery and lead times for all Bolt Action Rifles and Chassis, visit masterpiecearms.com/bolt-action-rifle-and-chassis-current-delivery-times.

For more information on MasterPiece Arms and their product line of rifles, chassis systems, and accessories, visit www.masterpiecearms.com.

Posted in Firearms, Press Release | Comments Off on MasterPiece Arms (MPA) Unveils the MPA AR9 PCC (Pistol Caliber Carbine)

1791 Gunleather Holsters Available for New Optic-Ready Glock G43x and G48

Wednesday, November 4th, 2020

Miami, FL – Optic ready firearms are not a new concept and manufactures today continue to expand existing models as well as bring out several new firearms that are optic capable as well as OEM equipped. There is a major shortage in quality holsters that perform at the highest standard for today’s variety of optic ready firearms. At 1791 Gunleather we identified that shortage and challenged it head on with now over 20 holsters that fit over 100 models of optic ready firearms. We are excited to introduce 2 more optic ready holsters for the popular Glock G43x and G48.

Glock first introduced the slimline G43x and G48 in July of 2019. Since then the slimline frame and 10-round capacity firearms have become incredibly popular with shooters of all shapes, sizes, and skill levels. Now, Glock has introduced a new feature to these two popular models, a Micro Optic System (MOS) configuration, and 1791 Gunleather has holsters ready for the new versions of these sidearms.

“We will continue to create new designs and modify existing models to meet the needs of armed America,” said Alex Toussieh, COO of 1791 Gunleather. “Leather is a very obliging material and our leather working artisans are the best in the world.”

The new design is a great feature for the two, already popular, firearm models. Many shooters have come to love the MOS-style optics for self-defense and other close-quarters shooting scenarios. The quick target acquisition and improved shooter accuracy are benefits that shooters of all skillsets can enjoy. With 1791 Gunleather, users of these new models have premium quality holster options offering the perfect blend of comfort and functionality.

For more information on holsters for the new optic-ready G43x and G48, visit www.1791gunleather.com.

Posted in Holsters, Press Release | Comments Off on 1791 Gunleather Holsters Available for New Optic-Ready Glock G43x and G48

1791 Gunleather Welcomes New Regional Sales Manager

Wednesday, November 4th, 2020

Miami, FL, U.S. – 1791 Gunleather is pleased to announce the addition of George Vilarino as the new Regional Sales Manager for the Northeast and Great Lakes regions. George joins the team with a wealth of experience leading sales and customer service efforts all around the world. In this new role, he will oversee sales efforts for 1791 Gunleather in the NE and Great Lakes territories.

1791 Gunleather has experienced tremendous growth recently thanks to continued innovation in leather holsters, handgun accessories, and other premium leather goods for sporting and outdoor enthusiasts. With that growth comes demand for additional team members to service and support our expanding customer base. “We are excited to welcome George back to the team at 1791 Gunleather,” said Alex Toussieh, CEO of 1791. “He has a decorated resume and has even spent some time at 1791 previously so he brings knowledge of our industry and products that will allow us to continue serving our customers in his territory very well.”

George brings to 1791 a wide range of skills that will help the team continue delivering incredible customer service and sales all while maintaining the high standards 1791 Gunleather customers have come to know and expect. As with everything we do at 1791 Gunleather, we’re keeping our amazing customers in mind and believe adding George to the team will add tremendous value to our customer base in the Northeast and Great Lakes areas.

Posted in Holsters, Industry, Press Release | Comments Off on 1791 Gunleather Welcomes New Regional Sales Manager