Press Release | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Press Release’ Category

Introducing the AMTAC Complete Carbine Rifle and Pistol

Friday, May 15th, 2020

[ Morgantown, Indiana — ]

Centurion Arms LLC is happy to announce the AMTAC Complete Carbine Rifle and Complete Carbine Pistol!

We have known Bill for over 20 years now and can say with confidence he is one of the best people we know. Bill is no doubt one of the very best instructors there is on the open market for training. He recently retired after twenty years in the Navy, where his duty assignments included several years at SEAL Team 3 and over 14 years at Naval Special Warfare Development Group. Positions held included assaulter, breacher, sniper, team leader, troop chief, and military working dog department senior enlisted adviser. He has always been an avid shooter and is heavily involved in combatives. With his background and knowledge, he is easily the most combat-experienced instructor available anywhere today. Bill is now running “AMTAC”, American Tactical Shooting Instruction, LLC along with classes across the country! www.amtacshooting.com

The Centurion Arms AMTAC Complete Carbine Rifle and Complete Carbine Pistol are built to Bill’s specs, producing his ultimate carbine setup. We are proud to bring Bill’s knowledge and vision to life with this awesome collaboration!

AMTAC Complete Carbine Rifle

Weight: 6.1lbs

Length: 32.5in (stock collapsed)

Upper: Centurion Arms 16” 5.56mm chrome hammer forged barrel, government profile under the handguard, 1/7 twist, Independently Certified MIL-SPEC 11595E barrel steel, specifically engineered for machine guns for longer life (most all hammer forged barrels on the market are not made of this steel), USGI 5.56mm NATO, chrome lined bore and chamber. HPT/MPI (High Pressure Test/Magnetic Particle inspected), per MIL-SPEC. Manganese Phosphate Finish on entire barrel,
• Centurion Arms CM4 Forged Upper receiver is standard forged Mil-Spec with M4 Extended feed ramps
• Centurion Arms low profile pinned gas block
• 13” MLOK Centurion Arms CMR Rail
• Mid-length gas tube
• Surefire WARCOMP three prong
• BCG: Full Auto machined from MIL-SPEC Carpenter 158 Steel. MPI (Magnetic Particle Inspected), Shot Peened, Tool Steel Extractor w/enhanced extractor spring, Chrome Lined Carrier, Hardened, Chrome Lined Gas Key w/staked Grade 8 Fasteners as per MIL-SPEC.

Lower
• Centurion Arms CM4 Forged Lower Receiver (w/AMTAC logo Engraving)
• Receiver Plate-Standard
• Fire Control Group: Geissele SSA
• Trigger Guard: Aluminum Winter Trigger Guard
• Buffer: H2
• Grip: A2

Stock: Magpul CTR Carbine Stock

Includes: Rifle, (1) 30rd Magazine, Digital USGI Manual

AMTAC Complete Carbine Pistol

Weight: 5.4lbs

Length: 27in (stock collapsed)

Upper: Centurion Arms 11.5″ Carbine Gas 5.56mm chrome hammer forged barrel, government profile under the handguard, 1/7 twist, Independently Certified MIL-SPEC 11595E barrel steel, specifically engineered for machine guns for longer life (most all hammer forged barrels on the market are not made of this steel), USGI 5.56mm NATO, chrome lined bore and chamber. HPT/MPI (High Pressure Test/Magnetic Particle inspected), per MIL-SPEC. Manganese Phosphate Finish on entire barrel,

• Centurion Arms CM4 Forged Upper receiver is standard forged Mil-Spec with M4 Extended feed ramps
• Centurion Arms low profile pinned gas block
• 10.5″ MLOK Centurion Arms CMR Rail
• Carbine-length gas tube
• Surefire WARCOMP three prong
• BCG: Full Auto machined from MIL-SPEC Carpenter 158 Steel. MPI (Magnetic Particle Inspected), Shot Peened, Tool Steel Extractor w/enhanced extractor spring, Chrome Lined Carrier, Hardened, Chrome Lined Gas Key w/staked Grade 8 Fasteners as per MIL-SPEC.

Lower:
• Centurion Arms CM4 Forged Lower Receiver (w/AMTAC logo Engraving)
• Receiver Plate-Standard
• Fire Control Group: Geissele SSA
• Trigger Guard: Aluminum Winter Trigger Guard
• Buffer: H2
• Grip: A2
• Arm Brace: SBA4

Includes: Pistol, (1) 30rd Magazine, Digital USGI Manual

Posted in Black Rifle, Press Release, weapons | 2 Comments »

USArmy Awards AeroVironment $146 Million Lethal Miniature Aerial Missile Systems Contract Funded at $76 Million for First Year of Switchblade Systems Procurement

Friday, May 15th, 2020

· AeroVironment’s combat proven Switchblade with patented wave-off feature provides operators with increased lethality, reach and precision strike capabilities with low collateral effects

· First year of funding approved through Joint Urgent Operational Need Statement, reflecting high-priority requirement and strong user demand from the frontline

· AeroVironment provides full system solution, including Switchblade systems, operator training, support and logistics

AeroVironment’s Switchblade is a back-packable, rapidly deployable, loitering precision strike missile designed for use against beyond-line-of-sight (BLOS) targets, from either mobile positions in the field or from fixed defensive positions for base security.

SIMI VALLEY, Calif., at vSOFIC, May 14, 2020 – AeroVironment, Inc. (NASDAQ: AVAV), a global leader in unmanned aircraft systems (UAS), announced the receipt of a one-year, $75,930,901 funded contract award on April 30, 2020 from the United States Army for procurement of the company’s Switchblade® loitering missile system. The contract award was funded for the first year of procurement through a Joint Urgent Operational Need Statement from the United States Army Tactical Aviation and Ground Munitions (TAGM) project office. Start of deliveries is anticipated by September 2020. Two additional one-year options, currently unfunded, would extend the period of performance through April 2023 on a sole-source basis.

“For nearly a decade, AeroVironment’s Switchblade has delivered unmatched force protection and precision strike capabilities at the battlefield edge to the U.S. Army,” said Brett Hush, AeroVironment senior product line general manager of Tactical Missile Systems. “We will continue to enhance the capabilities of this battle-proven product, and stand ready with a proven supply chain and customer support system in order to respond effectively to U.S. and allied customers’ needs.”

AeroVironment’s combat proven Switchblade is back-packable and rapidly deployable from ground platforms including a 6-pack launcher, providing warfighters with rapid-response force protection and precision strike capabilities up to 10 kilometers (6 miles) from its launch location. Its high precision, combined with specialized effects and patented wave-off feature, results in Switchblade’s ability to minimize or even eliminate collateral damage.

Northrop Grumman is a key partner on the Switchblade system, providing single purpose and multimode warheads for the program.

Learn more about Switchblade at the AeroVironment, Industry Showcase at vSOFIC www.sofic.org/vsofic or at www.avinc.com/switchblade.

Posted in Aviation, Contracts, Press Release, UAS, weapons | Comments Off on USArmy Awards AeroVironment $146 Million Lethal Miniature Aerial Missile Systems Contract Funded at $76 Million for First Year of Switchblade Systems Procurement

BAE Systems Selects Kongsberg’s MCT-30 Turret for U.S. Marine Corps ACV Program

Friday, May 15th, 2020

May 13, 2020 – Kongsberg Defence & Aerospace AS (Kongsberg) has been selected by BAE Systems, Inc. to design and manufacture the remote Medium Caliber Turret (MCT) for the United States Marine Corps’ Amphibious Combat Vehicle (ACV) -30 program. Kongsberg will deliver up to 150 MCTs in a phased program as part of this contract. Test article delivery will commence early 2021 followed by production phases.

The Kongsberg MCT-30 is the first remotely operated 30mm turret to be qualified and fielded in the United States. The system provides highly accurate firepower for wheeled or tracked combat vehicles. It is remotely controlled and operated from a protected position inside the vehicle compartment for optimized crew safety.

The MCT-30 leverages a link-less medium caliber cannon providing lethality, extremely high reliability and multi-user functions to the Marine Corps ACV and other platforms.

“The ACV-30 with Kongsberg’s MCT-30 turret signifies a powerful lethality capability for the Marine Corps, representative of a new era in U.S. amphibious operations,” said Pål E Bratlie, Executive Vice President Kongsberg Defence & Aerospace.”

The U.S. Army, in 2015, chose Kongsberg’s MCT-30 to increase the lethality of the Stryker Brigade in Europe. The system has been fielded and operated with the Army as part of the European Deterrence Initiative since 2018.

It is the primary armament and fire control system for the Infantry Carrier Vehicle – Dragoon (ICV-D) Strykers. All MCT-30s, and any remote weapon stations, bound for U.S. customers are manufactured in the Kongsberg Johnstown, Penn. facility leveraging a U.S. supply base located in over 30 states.

Posted in Armor, Press Release, weapons | 3 Comments »

A Quantum Leap in Force Protection – Rheinmetall Supplying Bundeswehr with Fuchs/Fox Armoured Transport Vehicles Configured for EOD Role

Friday, May 15th, 2020

Unexploded ordnance, mines and improvised explosive devices pose a grave threat to troops deployed in harm’s way. The German Bundeswehr is currently taking delivery of a newly developed high-performance system for countering these threats. Specially configured for an EOD role, this new variant of the Fuchs/Fox 1A8 armoured transport vehicle – known as the KAI – represents a quantum leap in the German military’s ability to detect and identify unexploded ordnance and similar battlefield hazards. Thanks to its high-performance electronics and a precise, multi-jointed, versatile manipulator arm featuring state-of-the-art sensors, Bundeswehr bomb disposal experts will now be able to reconnoitre, mark, expose and identify suspicious objects from a safe distance. Delivery of these serially produced systems is already underway, and slated to be complete in 2020. The order is worth a figure in the mid-double-digit million-euro range.

The Fuchs/Fox KAI reinforces the Bundeswehr’s array of heavy-duty EOD vehicles, and is designed to investigate vulnerable points which the Route Clearance System – partially supplied by Rheinmetall as well – cannot reach. Furthermore, the KAI is intended to serve as a stand-alone system capable of operating without the Route Clearance System in a convoy support role.

The carrier vehicle for the KAI is the latest iteration of the 1A8 version of this tried-and-tested armoured transport vehicle. Extremely well protected from mine and IED blasts, it is equipped with advanced force protection elements and mine-resistant seats that the keep the crew’s feet safely off the floor of the hull. The most prominent feature of the Fuchs/Fox KAI is the aforementioned multi-jointed, high-precision manipulator arm, with a maximum operating reach of over ten metres and a load-carrying capacity of 400 kg. This enables EOD personnel operating in the Fuchs/Fox fighting compartment to investigate suspicious locations and to examine and identify ordnance and booby traps with great precision from a safe standoff.

Besides the basic tool, the manipulator can accommodate two other tools. One of these is a dual sensor, the 80-centimetre variant employed by the Route Clearance System. It can be used for investigating suspicious spots and determining whether ordnance has been buried there. In addition, there is also a tool camera. Mounted on a tilt-and-pan head, this device can optically examine hard-to-view places such as drainage pipes, the sides and undersides of bridges or locations behind walls in order for example to detect the presence of an explosive device. To enable visual reconnaissance, the system features high-performance optronic technology. An optronic wiping-and-washing system makes it possible to quickly clean the reconnaissance camera during an ongoing operation. This significantly boosts the system’s tactical flexibility.

Other core elements of the KAI are its water-air spade system, with a maximum operating pressure of 400 bar, and a ripper chisel. This enables the EOD crew to uncover suspicious objects which cannot be clearly identified. Marking can be done digitally either in the system by means of exact GPS coordinates, or with an optical marking device for the dismounted bomb disposal engineer.

Moreover, the manipulator arm can be mounted with a recovery system for removing persons from a danger zone.

Rheinmetall is the German military’s partner of choice for combat engineering equipment. Other products in this segment include a share in the already mentioned Route Clearance System, the Dachs/Badger Armoured Engineering Vehicle 2, the Keiler armoured mine-clearing vehicle, and multiple variants of the Fuchs/Fox armoured transport vehicle.

Posted in Advertiser, EOD, International, Mobility, Press Release | Comments Off on A Quantum Leap in Force Protection – Rheinmetall Supplying Bundeswehr with Fuchs/Fox Armoured Transport Vehicles Configured for EOD Role

Qore Performance IcePlate Curve Now Available in Wolf Grey and Ranger Green

Thursday, May 14th, 2020

Sterling, VA – Responding to high customer demand, Qore Performance has released two new colors for the IcePlate Curve: Ranger Green and Wolf Grey. Also available in Coyote and Frost, the IcePlate Curve thermoregulation system is the world’s most powerful water bottle. Worn close to the body, IcePlate Curve provides performance enhancement benefits to the user through cooling or heating the body, while also meeting hydration needs. The IcePlate Curve ships standard with the Source 90 drink tube, the most advanced hydration hose on the market, created in a collaboration between Source and Qore Performance. The Wolf Grey and Ranger Green colorways are compatible in both color and fit with nearly every plate carrier on the market today.

Posted in Advertiser, Armor, Press Release, Sustainment | Comments Off on Qore Performance IcePlate Curve Now Available in Wolf Grey and Ranger Green

Remington R2Mi Bolt Action Rifle

Thursday, May 14th, 2020

Huntsville, AL – From its match-grade chamber out, the R2Mi rifle is built to shatter all previous expectations for long-range accuracy. A free- floated barrel, with 1:15” twist and 8-groove rifling is perfectly suited for harnessing sub-MOA accuracy from the 50 BMG. And its left-hand operated, right-hand eject bolt-action and 10-round box magazine, ensure comfortable cycling with no need for the shooter to adjust position. The R2Mi rifle is also one of the simplest 50-caliber rifles to assemble and maintain. Its upper receiver locks to the lower receiver with two integral pins, and its full-length Picatinny rail accommodates a wide range of optics.

NEVER DETERRED BY DISTANCE

Key Features

• Bolt action: left bolt / right port, for faster cycling of action
• Lothar Walther barrel free-floated within vented hand guard
• Lower receiver machined from T6-6061 aluminum billet
• MIL-STD 1913 rail on receiver and vented hand guard
• Hard anodized type 3 green finish on aluminum parts (Mil-Spec)
• Manganese phosphate finish on steel parts
• Equipped with AAC muzzle brake to accept Cyclops silencer
• Steel bipod with folding legs
• Disassembles like an AR-type rifle for cleaning and maintenance
• Ships in custom Pelican Storm Case with two 10-round magazines, bipod, hearing and eye protection and cable lock

More information about the Company can be found at www.remington.com.

Posted in Press Release, weapons | 3 Comments »

CZ Group Acquires Minority Stake in Swedish Spuhr

Thursday, May 14th, 2020

Prague, May 11, 2020 – CZG – ?eská zbrojovka Group SE, one of the leading European producers of firearms, announces the acquisition of a minority stake in Spuhr i Dalby AB, a Swedish manufacturer of optical mounting solutions for weapons.

CZG’s acquisition of Spuhr creates mutual synergies in terms of products, customers and geographical presence. Spuhr’s product portfolio consists of optical mounts, accessories and upgrade kits for weapons, making it highly complementary to CZ’s core business.

“We are very pleased to join forces with Spuhr through this strategic investment. Håkan Spuhr and Ulf Nilsson have built a company which is the world leading manufacturer of optical mounting solutions. We believe that the connection of the CZ and Spuhr brands will further strengthen our position on the market and lead to continuous innovation for the benefit of our customers,” stated Lubomír Kova?ík, President of CZG.

“The cooperation with CZ is a strategic milestone for Spuhr. It will give us access to new markets, high-end testing technology and research. We will continue to be flexible and lead the development of new products for our important high-end customers. The partnership with CZ will take us to the next level,” stated Ulf Nilsson, CEO of Spuhr.

The Spuhr mounts and accessories are used by many military and law enforcement units around the world, including the Swedish, Dutch and Danish Army, German Police and Portuguese Navy. Spuhr also offers a popular hunting series of products.

Posted in Industry, International, Press Release, weapons | Comments Off on CZ Group Acquires Minority Stake in Swedish Spuhr

Safariland 7TS Series Holsters for Red Dot Optics Now Available for Glock Handguns

Thursday, May 14th, 2020

Seventeen models offered all with ALS retentionONTARIO, California – Safariland®, a brand of The Safariland Group, today announced its popular 7TS™ series holsters specifically designed to fit and protect handguns with red dot optics are now available to order. The new models are designated 7TS RDS, and current fits include the Glock 17, 19, 34, 45 and 47 MOS handguns.

“Red dot optics continue to gain strength in the marketplace, as evidenced by the high demand of our initial SafariLaminate™ models. And now, we have combined the virtually indestructible qualities of our 7TS holster materials with a protective hood design for red dot optics, creating the new industry standard. These are sure to gain popularity very quickly,” said James Dawson, duty gear category director for Safariland.

Safariland’s 7TS RDS holsters are constructed from durable SafariSeven™ material, a proprietary DuPont nylon blend that enables precision manufacturing while retaining exceptional durability in temperature extremes, allowing these reliably performing holsters to be practically impervious to the elements. Further, they require little maintenance to keep them functioning and looking good, and they are completely non-abrasive to firearm finishes.

The protective hood design on these models protect the red dot optic from damage and the elements. The pivoting hood automatically rotates forward to open as the user releases the ALS® retention lever via the thumb upon the draw. The handgun is then secured in the holster automatically upon reholstering. This best-in-class patented, intuitive internal locking device offers one of the most secure retention capabilities available today.

Seventeen model variations are now available for duty, tactical, and concealment carry, including the top-selling 7360RDS ALS/SLS Level III Retention Duty Holster. Models include:

– Duty: 7360RDS, 7362RDS, 7365RDS, 7390RDS, 7392RDS, 7395RDS

– Tactical: 7304RDS, 7305RDS, 7354RDS, 7355RDS, 7384RDS, 7385RDS

– Concealment: 7367RDS, 7376RDS, 7377RDS, 7378RDS, 7379RDS

The 7TS RDS models for the Glock 17MOS, 19MOS, 34MOS, 45MOS and 47MOS (also compatible with non-MOS models) are available in SafariSeven Plain Black or FDE Brown finishes for an MSRP ranging from $123.50 to $270.50.

For more information, please visit www.safariland.com/dutygear.

Posted in Holsters, Press Release | Comments Off on Safariland 7TS Series Holsters for Red Dot Optics Now Available for Glock Handguns