Press Release | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Press Release’ Category

DroneShield – Successful European Airport Trial

Wednesday, July 29th, 2020

DroneShield Ltd (ASX:DRO) (“DroneShield” or the “Company”) is pleased to announce it has successfully completed a trial deployment of its DroneSentinelTM system at a mid-tier European airport.

The trial was managed by Deutsche Telekom, one of the world’s leading integrated telecommunications companies.

The evaluation is expected to substantially shape the requirements for a large multi-million European airports tender expected to be released prior to year end. Whilst the Company is unable to quantify the tender more precisely, DroneShield expects the project to be material and will in due course provide an update on the dollar amounts to the market, when available.

Oleg Vornik, DroneShield’s CEO, has commented, “Airport market is a key segment for DroneShield, following high profile drone-related disruptions such as that has taken place at Gatwick Airport. We are now seeing airports, in particularly in Europe, mobilising their procurement selection processes towards wide rollouts of counterdrone systems. Each individual airport deployment is worth up to a multi-million dollar contract, including upfront and ongoing subscription payments, depending on the airport size and protection requirements. This successful trial forms a critical part of those selection processes.”

Posted in International, Press Release, UAS | Comments Off on DroneShield – Successful European Airport Trial

NDIA Joins Associations in Call for Funding, Extension of Section 3610 in CARES Act

Wednesday, July 29th, 2020

ARLINGTON, VA – The National Defense Industrial Association, along with seven industry associations representing thousands of government contractors, sent a letter July 24 to congressional leadership that urges funding and an extension to Section 3610 of the Coronavirus Aid, Relief and Economic Security Act.

Section 3610 authorized reimbursement of extraordinary and unanticipated government contractor costs arising from COVID-19. The authority for this provision is set to expire on Sept. 30, and funding has yet to be provided. As contractors continue to face the “ready state” workforce sustainment challenges that justified the enactment of 3610, the signing associations maintain that an extension and appropriation is necessary to support the continuity of government operations in the new fiscal year.

As companies across the defense industrial base continue adjusting to the changes brought on by the global pandemic, extending and funding 3610 is needed to support readiness and modernization across the Defense Department. The complete letter is available here.

Posted in Industry, Press Release | Comments Off on NDIA Joins Associations in Call for Funding, Extension of Section 3610 in CARES Act

Federal Ammunition Awarded $13.8 Million Delivery Order from the U.S. Army

Wednesday, July 29th, 2020

ANOKA, Minnesota – July 29, 2020 – Federal Ammunition was recently given a new $13.8 million delivery order based on its contract awarded in 2017 by the U.S. Army. The order is for 5.56 NATO MK311 Frangible Ammunition, which is better known by ordnance code AA40. This military-grade, training ammunition has a 50-grain frangible bullet comprised of a non-toxic, copper and tungsten powder matrix core, and a gilding metal jacket. It disintegrates into small fragments on impact, minimizing over-penetration and ricochet hazards.

“One of the differentiators of AA40 is the use of Federal’s exclusive Catalyst primer. It’s a lead-free technology that provides the most reliable, consistent ignition possible,” said VP of Law Enforcement, Government and International Sales David Leis. “Unlike many other lead-free primer formulations, Catalyst primers have unique properties that allow them to be effectively and safely used in service ammunition. Catalyst primers have been used in hundreds of millions of rounds of ammunition delivered to military, law enforcement and commercial customers to-date.”

“We have a long history of providing high quality specialty ammunition to multiple branches of the U.S. military. Their continued trust is of the utmost importance to us, and is something we are certainly most proud of,” said Federal Ammunition President Jason Vanderbrink. “With this, Federal Ammunition continues to demonstrate surety of supply, professional capability, the ability to meet all specifications, and reliable delivery on production expectations of our military contracts.”

Federal ammunition can be found at dealers nationwide or purchased online direct. For more on Federal ammunition, visit www.federalpremium.com.

Posted in Ammo, Contracts, Press Release | Comments Off on Federal Ammunition Awarded $13.8 Million Delivery Order from the U.S. Army

IR.Tools Releases Powered Thermal Targets

Wednesday, July 29th, 2020

CROFTON, MD – June 29, 2020 – Established in 2006, IR.Tools, a leading provider of IR (infrared) protection for the Military and Law Enforcement, first offered a ¾” infrared patch sewn on every military uniform in the United States. Shortly after, they became a leading provider for infrared technology, with passive infrared patches, markers, and shooting targets for night vision and thermal image operations all over the world. Tom Boyer, owner and lead engineer, jumped at the opportunity to add powered targets to his suite of high contrast passive shooting targets.

“We now provide our optics customers a one stop shop for all their thermal targets. Passive or Powered we will service them with a premium thermal target.”
—Tom Boyer, Owner, IR. Tools

This new powered thermal target heated with proprietary Fabroc® technology is nearly indestructible. Constructed with a rubber like material, it has no wires to short circuit from bullet penetration. Powering up on a 12 or 24-volt battery, the integrity of this lightweight, heat-efficient target remains intact for over 500 rounds, with a consistent thermal image and no flaring to disrupt training exercises.

What makes this thermal shooting target so unique is its durability. Fort Bragg, NC, has been shooting at the same Fabroc™ targets for 9-years. And IR.Tools aims to provide this stand-out IR target to the military, special forces, law enforcement, hunters, and recreational sportsmen alike.

“The unmatched number of shots it takes while maintaining a clear, realistic image to shoot is incredible.”
— Range Manger Fort Bragg

Not only are these powered thermal targets necessary for training, but they are easy to use. Their longevity means they are cost-effective. Now you can have a safe powered thermal target that lasts during some of the more complex training options, such as shoot, no-shoot scenarios.

You can purchase the powered thermal shooting target for an MSRP of $60.00 – $90.00 at INV PRO TECH Tools.

Posted in Advertiser, Press Release, Training | Comments Off on IR.Tools Releases Powered Thermal Targets

Warren Innovative Technologies – Suppressor Socket System

Tuesday, July 28th, 2020

Since Warren Innovative Technologies, LLC believes in continuous improvement and taking things to the next level, we have developed a socket set that incorporates all of the features of our legacy full-size wrenches but with important differences. A lot of time and thought went into these:

– The sockets are smaller than the full-size wrenches and use a ½” square drive handle, which is available at hardware stores, plus we have our own lightweight compact handle.

– Sockets can also be used without a handle, but the option is there for applying serious torque.

– Sockets are MADE IN THE USA on a Stratasys F120 3D printer out of solid injection mold grade ABS-M30 polymer, which is considerably stronger than typical 3D printed ABS.

– These polymer tools won’t damage mounts or front caps.

– Stainless steel dowel pins are used on sockets that require them for certain spanner features.

– Each one of the sockets has dedicated holes for parachute cord lanyards (AKA dummy cords).

– The sockets can be conveniently stored on storage strips that are available at hardware stores (not included). Detents are on all four sides of the ½” squares.

– The numbering system with suppressor make/model key eliminates the need to update tool identification markings as suppressor names evolve or as compatibility expands (Kraken/Mod9, Octane/Octane 2.0, Omega 9K/45K, Sandman/Nomad, etc.). Only our list needs to be updated, which will be on our website.

– The web address is on the bottom of each socket and on the top of the handle, minimizing the brand footprint. Some potential customers complained that the company name and city were on the full-size wrenches, so the identification markings were minimized. A customer can have additional text laser engraved if desired.

– Sockets are capable of withstanding serious torque, which makes them perfect for use with Energetic Armament Vox Blox soft vise jaws, which are available in our webstore.

– If you break one, we will replace it – but that’s not likely to happen.

– Suppressors should be allowed to cool below 200? F before using the sockets.

– The complete socket set is available at a considerable savings.

– Our socket handle is designed to keep the handle’s axis as close to the socket spanners as possible, thereby minimizing torque coupling. The parachute cord handle enables quick ergonomic socket removal while allowing a firm grip on each socket type. A steel ½” male square socket interface is retained in the handle by a spring-loaded detent. The handle’s other end has a ½” female interface for keeping the handle with the sockets on a storage strip.

Suppressor Socket System Number Key:

00 Socket Handle

01 Omega 9K

01* Omega 9K 18mmX1

02 SiCo 3-Pin

02* SiCo Bravo 3-Pin

03 Octane

04 Hybrid

05 Spectre II

06 Sparrow

07 TiRant

08 Oculus

09 Rugged Rifle

10 Obsidian

11 Male, Female 3-Lug

12 Mask

13 DA 4-Pin

14 Wolf-9SD

15 Ghost

16 Wolfman

16* DA 8-Lug Small Pin

17 Ghostman

18 Kraken/Mod9

19 Liberty Regulator

20 Liberty Mystic-X/Cosmic

21 SRD22X

22 SRD9/45

See our entire product line at suppressortools.com.

Posted in Press Release, Suppressors | Comments Off on Warren Innovative Technologies – Suppressor Socket System

Massif Earns USAF Approval for Women’s-Fit 2-Piece Flight Suit for All Non-Ejection Seat Platforms

Tuesday, July 28th, 2020

Massif – a pioneer in making the best-fitting, best-performing apparel for all service members – gains new approval

ASHLAND, Ore. – July 28, 2020 – Massif, a world leader in flame-resistant clothing for the United States Military, today announced a new branch-wide approval from the United States Air Force for its women’s-fit 2-Piece Flight Suit for all non-ejection seat platforms.

This is further affirmation of Massif’s long-standing commitment to providing the best-fitting garments for all end users. Massif prides itself on purposeful clothing design with a high level of detail that syncs with the real-life needs of its end-user, for maximum performance in the field.

Over the last decade, there has been a steady growth of women in the military, particularly in aviation, with women making up 20.2% of the Air Force and 19% of the United States Navy (according to 2018 statistics). Massif recognized this growth early on and over the last several years has intentionally developed a line of women’s fit clothing that provides the best in comfort and performance for female service members.

“We know that for a team to perform well, their gear needs to perform well. That means optimal comfort and functionality for each specific individual on that team,” said Darci Knobel, Vice President of Customer Experience. “We have always been laser-focused on making sure our clothes fit and perform their best for all end-users and have made a concerted effort to be at the forefront of providing performance garments designed specifically for women. Today’s news is further validation of our commitment, having already received approvals from the United States Navy for the women’s-fit 2-Piece Flight Suit, and approvals from all branches, including the United States Coast Guard, for our women’s-fit base layers.”

Massif’s 2-Piece Flight Suit was designed from direct end-user feedback across multiple branches and platforms. Massif wanted to enhance the capabilities of the modern aviator and aircrewman with innovative design features unique to its garments. The original patented attachment system in the suit was built to allow flexibility and movement between the jacket and pant while still aiding coverage in flash events.

Massif recently launched a short documentary film in their Massif Film Series titled “Love the Mission,” highlighting Captain Lexi McRobert, Operations Officer, G/1-189 AVN. Captain McRobert is a great example of the company’s mission to design and develop garments for women who serve.

“The days of women having to wear men’s uniforms are over,” said Knobel. “The example of Captain McRobert in our latest short film is a great one. Like nearly every woman in the military, she was issued a men’s flight suit. Wearing our women’s-fit 2-Piece Flight Suit allowed her to feel and perform her best. We are proud to provide the option for all service members to have the best-fitting gear to keep going and perform at their highest level.”

For more information on Massif, visit www.massif.com, or see what the company is up to on Instagram and Facebook.

Posted in Advertiser, Air Force, Clothing, FR, Press Release | Comments Off on Massif Earns USAF Approval for Women’s-Fit 2-Piece Flight Suit for All Non-Ejection Seat Platforms

Blue Sky Network Launches First Secure Docking Station for Iridium 9575A Satellite Phone to Government Markets

Monday, July 27th, 2020

SAN DIEGO — Tuesday, July 14, 2020. — Blue Sky Network, an Iridium Satellite Communications partner, has officially announced the release of the 9575A Docking Station, the first and only secure docking station for the Iridium 9575A satellite phone. The Iridium 9575A satellite phone is the only commercial handset that is capable of Type I encryption accredited by the U.S. National Security Agency for Top Secret voice communications and is replacing the now-obsolete Iridium 9505A satellite phone.

Blue Sky Network’s 9575A Docking Station, the successor to the ASE-MC03-DOD dock for the 9505A, is the only commercially available docking station that supports the 9575A satellite phone handset. The 9575A is an ideal secure satellite communications solution for military and/or government operations for use anywhere in the world. The 9575A Docking Station supports General Dynamics’ DOD security module 2 and Enhanced Mobile Satellite Services (EMSS) for global voice, data, and paging capabilities.

The Iridium Security Module 2 (ISM2) is a sleek, small form factor encryption module that provides NSA Certified protection of classified voice and data communications. The module is covert as it fits completely inside the Iridium 9575A handset and provides end-to-end security for information classified Top Secret and below. The docking station also enables seamless integration into existing Plain Ordinary Telephone Service (POTS) systems. Its small form factor and operator-friendly wall mounting make for smooth incorporation into everyday operations.

Blue Sky Network also offers a military-grade grab-and-go communications kit, aptly deemed the 9575A TOC BOX. The 9575A TOC BOX includes the 9575A Docking Station, external antenna, and a digital privacy handset in a ruggedized case for secure communications in remote, austere environments.

“Growing up in a military family, I learned the importance of safe and secure communications and the critical impact to military operations” said Nick Tucky, Blue Sky Network’s Vice President of Sales. “It’s been an honor supporting the U.S. military and federal agencies’ communications needs both CONUS and OCONUS.”

Posted in Comms, Press Release | Comments Off on Blue Sky Network Launches First Secure Docking Station for Iridium 9575A Satellite Phone to Government Markets

New RCBS Rebel Single Stage Press Now Available

Monday, July 27th, 2020

OVERLAND PARK, Kansas – July 24, 2020 – RCBS, the leading manufacturer of ammunition reloading equipment for rifles and pistols, announced today that the new Rebel Single Stage Press is now available and shipping to retail partners. Constructed from a solid cast iron frame and capable of delivering consistent loads with ease, the new press represents the next evolution in single stage press technology.

The new RCBS Rebel Single Stage Press has been meticulously machined to exacting tolerances and features several enhancements over competitive models. Among the new features include the tallest opening of any RCBS single stage press on the market, allowing it to make light work of today’s longer cartridges.

Other new features include an ambidextrous handle, machined referenced surfaces, and a spent primer system that allows the primers to go directly into a trash can ensuring that no primers are spilled on the work area. Additional features include a Zerk fitting for those times when lubrication is required along with an extra wide base for enhanced stability.

“The Rebel Single Stage Press offers outstanding strength, durability and versatility in one easy to use package,” said Jason Slinkard, Director of Shooting Accessories for Vista Outdoor. “Built to simplify the reloading process, our newest press continues forward the RCBS tradition of rugged dependability while promoting ease of operation at every touch point.”

For more information on the new RCBS kits visit your local retailer or go to www.RCBS.com.

Posted in Ammo, Press Release | Comments Off on New RCBS Rebel Single Stage Press Now Available