SureFire

Archive for the ‘SHOT Show’ Category

Visit Chase Tactical At SHOT Show

Thursday, January 17th, 2019

Chase Tactical will be exhibiting at the 2019 SHOT Show. We’ll be located in Booth 31210 where we’ll have our new product line along with our Ballistic Armor product line.  If you would like to set up a meeting with Chase Tactical we can be contacted at Sales@ChaseTactical.com

Will Petty Booth Appearance & Raffle at SHOT 2019

Wednesday, January 16th, 2019

59526907-A5A8-434E-91B3-E4B622149564

Fountain Valley, CA—SureFire will be hosting a Meet & Greet and giveaway with Will Petty of Centrifuge Training LLC at the SureFire booth #13968 on Tuesday 1/22/2019 from 1130a.m. to 1230p.m. Come by to meet Will, pick his brain on all things VCQB and get an exclusive poster. SureFire will be doing a raffle for new products at 12:15p.m. and tickets will be given out at the SureFire booth Welcome Desk between 8:30a.m. to 12:15p.m. on Tuesday.

Meet Author Jonathan Gilliam at the High Ground Booth during SHOT Show

Wednesday, January 16th, 2019

Author, SEAL, FBI Agent, Air Marshal and speaker Jonathan Gilliam will be signing his new book “Sheep No More” next week at the SHOT Show 2019 at the High Ground booth (15166).

Make sure to stop by and get your signed copy. He will be in the booth on Tuesday and Wednesday from 1430-1630.

High Ground; We Make Every Stitch Count…

The After SHOT Show Networking Party

Tuesday, January 15th, 2019

Sign up at www.eventbrite.com/e/after-shot-networking-party-tickets.

Visit Propel at the SHOT Show Supplier’s Showcase

Tuesday, January 15th, 2019

Propel LLC is exhibiting at the Supplier Showcase. They are an amazing small business, focusing on:

• Electrically enabled yarns and connections
• E-textile material components
• Stitchless engineering (a complete tool kit for materials design and materials)
• 3-D textile design and manufacturing

They have also developed a great insulated boot for flyer’s.

See them in booth #1232 8:30 AM–5:30 PM, January 21–22, 2019 during SHOT Show, Palazzo Ballroom, 5th Floor, Venetian Hotel Meeting Rooms in Las Vegas.

New Slide Patterns from Grey Ghost Precision

Tuesday, January 15th, 2019

V3V4-slides-2

Wallace, ID – Grey Ghost Precision is excited to announce that they have added two additional slide patterns to their GGP-19 and GGP-17 aftermarket Glock slide product line.

The new additions are simply called the V3 and V4, and while they share the same precision engineering and tightened critical tolerances of their predecessors the V1 and V2… they are offering something new to the optics-loving crowd. The V3 and V4 slides feature a hybrid MRDS cut. Previously the V1 and V2 slides were only cut and tapped for mounting the Trijicon RMR. However the V3 and V4 slides now feature a modified optic footprint to accommodate the slightly larger Leupold DeltaPoint Pro. Still want to mount your trusty Trijicon RMR? As it turns out, the DPP and RMR share a similar front profile without the bolt patterns intersecting each other. The primary difference in the footprints are overall length, but GGP resolved this with an ingenious aluminum shim plate for use with the shorter RMR. The result is dual compatibility right out of the box, without the need for bulky adapter plates that raise the optic further above the bore axis. Note: GGP provides three pairs of screws for mounting either the Leupold DPP, Trijicon RMR, or the G10 RMR cover plate (for you iron sight purists). Using the factory-length screws that come with your optic of choice will not install correctly.

V3V4-slides-1

As if the optics feature wasn’t enough, the new patterns on the V3 and V4 are worth attention as well. At a quick glance, GGP’s V3 slide would seem to be standard angled serrations. However upon further inspection, the depth of the serrations taper inwards as the cut goes up the slide. This gives you a much more aggressive grip near the top of the slide for press checks and malfunction clearing drills, especially under sweaty, muddy, or bloody conditions. The top of the V3 has shallow cuts that also aid in press checks, while mimicking the design on top of the GGP Glock Barrels.

For the V4 slides, they’ve designed a studded micro-scale texture that provides an unmatched level of frictional grip in any direction of pull. Reminiscent of their V2 slide with “geoscales,” however this pattern is smaller and the little studs within each individual scale provide a much higher level of frictional grip in leu of traditional serrations. The V4 also has a top window cutout presumably for weight balance.

V3V4-slides-4
V3/V4
 SPECS

  • Machined from 17-4 Billet Stainless Steel for tighter-than-factory-tolerances
  • Black Nitride coated inside and out for superior corrosion resistance
  • Dual compatibility with Leupold DPP and Trijicon RMR with supplied screws and shim plate
  • V3 Slide Pattern with tapered depth serrations for varying aggressiveness from top to bottom
  • V4 Slide Pattern with studded micro-scales for enhanced frictional grip
  • Available for Gen 3 or Gen 4 G19 compatible frames

The Grey Ghost Precision V3 and V4 is available for pre-order now for February delivery. Visit www.greyghostprecision.com for more details.

dates-std-2019-2x Black

For a hands on experience, visit Grey Ghost Precision at SHOT Show 2019, Booth #4366

Check Out The Latest From Safran Optics1 At SHOT Show

Tuesday, January 15th, 2019

Agilite SHOT Show Info

Monday, January 14th, 2019

Come meet the Agilite team and see the latest Israeli gear innovations at Booth 20659 at the 2019 NSSF Shot Show, January 22-25, 2019, at the Sands Expo Center in Las Vegas, Nevada. 

There will be new gear on display and large new giveaways each day. Please email us at customercare@agilitegear.com to schedule your appointments with Agilite for 2019 Shot Show.

www.agilitegear.com