Team Wendy is showing their new Exfil Ballistic SL. It provides NIJ level IIIA protection, providing less than 25mm back face deformation for 124 gr 9mm FMJ @1195 FPS in a package that weighs 2.2 lbs.
Additionally, it integrates the new Wilcox SL Shroud and updated SL rail which allows visor attachment. The visor utilized a lens by ESS meeting full MCEP requirements. Look for a full face riot shield later this year.
Seen beside their “Vault” waterproof insert.
The immediate thought when picking up the Genesis Z9 was “This looks and feels like an aluminum Gen 3 Glock.” Given the general look of the Z9, and the fact that there is a fair bit of parts compatibility with a stock Glock, it’s not an unfair assessment to make. However, given the wide degree of modularity the base frame offers, the Z9 is truly a pistol all its own.
Seen above is a near fully-stripped base module, which the rest of the pistol can be built around. Shooters can increase the length of the grip from carry to full, add a flared magwell, replace the back strap, and even replace the front strap to add or remove finger grooves.
Additional modularity allows shooters to swap the dust cover between compact and full, or even a dust cover with an integrated compensator.
ZRODelta is offering their own range of slides in carry, full, and long slide options. The optics cutout models can be paired with different mounting plates for a variety of common micro dots. Other Gen 3 slides, whether factory or aftermaket, are also compatible with the Z9.
At the Troy Industries booth, the full line of accessories they developed with Dan Brokos of Lead Faucet Tactical were on display.
The LFT Brokos Brace is constructed of 6061-T6 aluminum. At 2″ long, the Brokos Brace is deliberately sized a bit larger than many stubby handstops, so there’s plenty of purchase to secure the brace against barriers and other platforms. M-LOK compatible.
The LFT 360 Sling Mount is designed to mount directly to M-LOK slots, rather than attach to a QD slot. It to provides 360 degrees of rotation with a mounted sling, for snag free use in a variety of shooting and carrying positions.
The LFT Flashlight Mount was is constructed of 6061-T6 aluminum. It was designed to mount extremely close to the rail for better weapon control. The mount can also be reversed so the light can be used in tandem with a laser. The LFT Flashlight Mount comes in two sizes: small for mounting a SureFire E-Series light, and Large for most lights with a 1″ diameter.
The Ruger PC carbine is a takedown carbine chambered for 9x19mm. It features a cold hammer-forged, chrome-moly steel barrel with a heavy contour, and external fluting for weight reduction. The barrel is also threaded with a 1/2″x28 thread pitch for the attachment of standard muzzle accessories and suppressors. The PC Carbine comes with a ghost ring rear and front blade iron sight, and a top integrated picatinny rail on the aluminum receiver allows for the attachment of and electronic sight or scope. Additionally, the PC Carbine can be set up for both left and right hand shooting, with a reversible magazine release and charging handle. It’s also worth noting that some, not all, trigger components on the PC are interchangeable with the Ruger 10/22, so there’s already some aftermarket support for this rifle.
The Ruger PC Carbine comes equipped in the box with a magwell for the SR9/Security-9 magazine, although a magwell for Glock magazines is also included, and is quick to install. Ruger has also released a magwell for the American Pistol magazine, that is currently available.
Designed for use with the M4A1 carbine, the Tier 1 Operator Rife Kit includes:
Pouch
6 x Coyote coated rod sections
Coyote swivel aluminum T-handle
5.56 Sermon Tool Knife
Double end nylon utility brush
Bore brush
Spear point jag
Patch holder
Broken cartridge/obstruction remover
Chamber brush
Chamber mop
One step needle oiler
Cleaning patches
Pro Gold lubricant
Wipe cloth
Gas tube cleaners
UV Illuminator chamber flag bore light
It is available via GSA for government customers and has already been fielded to several units.
Manufactured by Winkler Knives for Dynamis Alliance, the Combat Flathead is a breacher spike. It features full tang construction and a leather wrap handle.
Comes with a simple Kydex sheath.
The 590M is a box magazine-fed variant of the 590 shotgun. All the standard features of the 590 shotgun are present with the 590M (dual extrators, ambi safety, heavy-walled barrel, etc.), however the magwell features stabilizing ribs that engage with the magazine when loaded to ensure solid lock-up. The magazines for the 590M are manufactured by Adaptive Tactical, and come in 5, 10, 15, and 20-round capacities. They are a double-stack design, with hardened steel feed lips, overmolded grips, a self-lubricating polymer body, and an ASTM-A-228 music wire magazine spring.
The Mossberg 590M will be offered in both a standard and tri-rail model, the later of which includes a heat shield and ghost ring sights. Both models will come with a single 10-round magazine, and are currently in production.
