SIG SAUER - Never Settle

IR.Tools Releases Powered Thermal Targets

July 29th, 2020

CROFTON, MD – June 29, 2020 – Established in 2006, IR.Tools, a leading provider of IR (infrared) protection for the Military and Law Enforcement, first offered a ¾” infrared patch sewn on every military uniform in the United States. Shortly after, they became a leading provider for infrared technology, with passive infrared patches, markers, and shooting targets for night vision and thermal image operations all over the world. Tom Boyer, owner and lead engineer, jumped at the opportunity to add powered targets to his suite of high contrast passive shooting targets.

“We now provide our optics customers a one stop shop for all their thermal targets. Passive or Powered we will service them with a premium thermal target.”
—Tom Boyer, Owner, IR. Tools

This new powered thermal target heated with proprietary Fabroc® technology is nearly indestructible. Constructed with a rubber like material, it has no wires to short circuit from bullet penetration.  Powering up on a 12 or 24-volt battery, the integrity of this lightweight, heat-efficient target remains intact for over 500 rounds, with a consistent thermal image and no flaring to disrupt training exercises.

What makes this thermal shooting target so unique is its durability. Fort Bragg, NC, has been shooting at the same Fabroc™ targets for 9-years. And IR.Tools aims to provide this stand-out IR target to the military, special forces, law enforcement, hunters, and recreational sportsmen alike.

“The unmatched number of shots it takes while maintaining a clear, realistic image to shoot is incredible.”
— Range Manger Fort Bragg

Not only are these powered thermal targets necessary for training, but they are easy to use. Their longevity means they are cost-effective. Now you can have a safe powered thermal target that lasts during some of the more complex training options, such as shoot, no-shoot scenarios.

You can purchase the powered thermal shooting target for an MSRP of $60.00 – $90.00 at INV PRO TECH Tools.

Army Project Develops Self-Healing Material Patterned After Nature

July 29th, 2020

RESEARCH TRIANGLE PARK, N.C. — An Army-funded project developed a self-healing material patterned after squid ring teeth protein. The biodegradable biosynthetic polymer could be used to repair materials that are under continual repetitive movement such as robotic machines, prosthetic legs, ventilators and personal protective equipment like hazmat suits.

“Materials that undergo continual repetitive motion often develop tiny tears and cracks that can expand, leading to catastrophic failure,” said Dr. Stephanie McElhinny, biochemistry program manager, Army Research Office, an element of the U.S. Army Combat Capabilities Development Command’s Army Research Laboratory. “With a self-healing bio-based synthetic material, any sites of damage that emerge can be repaired, extending the lifetime of the system or device.”

The research at Penn State University and Max Planck Institute for Intelligent Systems, Stuttgart, Germany, funded in by part by ARO, and published in Nature Materials produced high-strength synthetic proteins that mimic those found in nature. The researchers surveyed large libraries of novel proteins created by assembling repetitive sequences from the squid ring teeth protein in different configurations.

Squid ring teeth are circular predatory appendages located on the suction cups of squid used to grasp prey. If the teeth are broken — they can heal themselves. The soft parts in the proteins help the broken proteins fuse back together in water, while the hard parts help to reinforce the structure and keep it strong.

“Our goal is to create self-healing programmable materials with unprecedented control over their physical properties using synthetic biology,” said Melik Demirel, professor of engineering science and mechanics at Penn State and the paper’s co-author.

Current strategies for material self-healing have significant limitations, including requirements for potentially hazardous chemicals, loss in functionality of the healed material relative to the original state, and long healing times, often greater than 24 hours.

“We were able to reduce a typical 24-hour healing period to one second, so our protein-based soft robots can now repair themselves immediately,” said Abdon Pena-Francelsch, Humboldt postdoctoral fellow, physical intelligence department at the Max Planck Institute for Intelligent Systems and lead author of the paper. “In nature, self-healing takes a long time. In this sense, our technology outsmarts nature.”

The self-healing polymer heals with the application of water and heat, although Demirel said that it could also heal using light.

“Self-repairing physically intelligent soft materials are essential for building robust and fault-tolerant soft robots and actuators in the near future,” said Metin Sitti, director, physical intelligence department at the Max Planck Institute for Intelligent Systems.

By adjusting the number of tandem repeats, the researchers created a soft polymer that healed rapidly and retained its original strength. They also created a polymer that is 100% biodegradable and 100% recyclable into the same, original polymer.

“We want to minimize the use of petroleum-based polymers for many reasons,” Demirel said. “Sooner or later we will run out of petroleum and it is also polluting and causing global warming. We can’t compete with the really inexpensive plastics. The only way to compete is to supply something the petroleum-based polymers can’t deliver and self-healing provides the performance needed.”

Demirel explained that while many petroleum-based polymers can be recycled, they are recycled into something different. For example, polyester t-shirts can be recycled into bottles, but not into polyester fibers again.

Just as the squid the polymer mimics biodegrades in the ocean, the biomimetic polymer will biodegrade. With the addition of an acid like vinegar, the polymer will also recycle into a powder that is manufacturable into the same, soft, self-healing polymer.

“This research illuminates the landscape of material properties that become accessible by going beyond proteins that exist in nature using synthetic biology approaches,” McElhinny said. “The rapid and high-strength self-healing of these synthetic proteins demonstrates the potential of this approach to deliver novel materials for future Army applications, such as personal protective equipment or flexible robots that could maneuver in confined spaces.”

In addition to Army funding, the Max Planck Society, the Alexander von Humbolt Foundation, the Federal Ministry for Education and Research of Germany and the Huck Endowment of the Pennsylvania State University supported this work.

By U.S. Army CCDC Army Research Laboratory Public Affairs

Warren Innovative Technologies – Suppressor Socket System

July 28th, 2020

Since Warren Innovative Technologies, LLC believes in continuous improvement and taking things to the next level, we have developed a socket set that incorporates all of the features of our legacy full-size wrenches but with important differences. A lot of time and thought went into these:

– The sockets are smaller than the full-size wrenches and use a ½” square drive handle, which is available at hardware stores, plus we have our own lightweight compact handle.

– Sockets can also be used without a handle, but the option is there for applying serious torque.

– Sockets are MADE IN THE USA on a Stratasys F120 3D printer out of solid injection mold grade ABS-M30 polymer, which is considerably stronger than typical 3D printed ABS.

– These polymer tools won’t damage mounts or front caps.

– Stainless steel dowel pins are used on sockets that require them for certain spanner features.

– Each one of the sockets has dedicated holes for parachute cord lanyards (AKA dummy cords).

– The sockets can be conveniently stored on storage strips that are available at hardware stores (not included). Detents are on all four sides of the ½” squares.

– The numbering system with suppressor make/model key eliminates the need to update tool identification markings as suppressor names evolve or as compatibility expands (Kraken/Mod9, Octane/Octane 2.0, Omega 9K/45K, Sandman/Nomad, etc.). Only our list needs to be updated, which will be on our website.

– The web address is on the bottom of each socket and on the top of the handle, minimizing the brand footprint. Some potential customers complained that the company name and city were on the full-size wrenches, so the identification markings were minimized. A customer can have additional text laser engraved if desired.

– Sockets are capable of withstanding serious torque, which makes them perfect for use with Energetic Armament Vox Blox soft vise jaws, which are available in our webstore.

– If you break one, we will replace it – but that’s not likely to happen.

– Suppressors should be allowed to cool below 200? F before using the sockets.

– The complete socket set is available at a considerable savings.

– Our socket handle is designed to keep the handle’s axis as close to the socket spanners as possible, thereby minimizing torque coupling. The parachute cord handle enables quick ergonomic socket removal while allowing a firm grip on each socket type. A steel ½” male square socket interface is retained in the handle by a spring-loaded detent. The handle’s other end has a ½” female interface for keeping the handle with the sockets on a storage strip.

Suppressor Socket System Number Key:

00 Socket Handle

01 Omega 9K

01* Omega 9K 18mmX1

02 SiCo 3-Pin

02* SiCo Bravo 3-Pin

03 Octane

04 Hybrid

05 Spectre II

06 Sparrow

07 TiRant

08 Oculus

09 Rugged Rifle

10 Obsidian

11 Male, Female 3-Lug

12 Mask

13 DA 4-Pin

14 Wolf-9SD

15 Ghost

16 Wolfman

16* DA 8-Lug Small Pin

17 Ghostman

18 Kraken/Mod9

19 Liberty Regulator

20 Liberty Mystic-X/Cosmic

21 SRD22X

22 SRD9/45

See our entire product line at suppressortools.com.

New Cordell Combat Pant Colors From Tactical Distributors

July 28th, 2020

In addition to a restock of Dark Urban Grey and Coyote, Tactical Distributors has added Ranger agree and MultiCam to their line of Cordell Combat Pants.

Fabric:
• Stretch Tweave Poly/Nylon Blend Softshell
• DWR Treated For Water Resistance
• Abrasion Resistant
• Moisture Wicking
• Quick Dry
• Breathable
• 48% Nylon, 42% Poly, 10% Spandex

Pockets:
• 10 Pocket Design
• 2 Front Venting Hand Pockets
• 2 Front Coin Pockets (fits pistol mags)
• 2 Front Thigh AR Open Mag Pockets (also fits most phones)
• 2 Front Thigh Zip Bellow Pockets
• 2 Back Zip Pockets
• All Pockets With Zippers Have Zipper Garage

Features:
1 ?Articulated Knees
2 Gusseted Crotch
3 2 Leg Adjustment Points
4 YKK Zippers
5 Slot Button Closure
6 Wide Belt Loops for Heavy Loads
7 Velcro Knee Pad Pockets
8 2 Side Zipper Vents
9 Knife Reinforced Area
10 Heel Reinforced Area

Get yours at www.tacticaldistributors.com.

The MultiCam variant features MultiCam NYCO Extreme 5.4 oz and a Stretch Tweave Poly/Nylon Blend Softshell. These highly abrasion reaistant fabrics have been DWR treated for water resistance and quick drying, yet retain their breathability.

Roll Your Own – SIG SAUER Offering Stand Alone P320 Custom Works Fire Control Unit

July 28th, 2020

For decades you’ve been able to assemble your own M1911A1 and over the past few years, DIY gunsmiths have assembled Glock clones. Now, SIG SAUER is entering the fray with stand alone P320 Custom Works Fire Control Unit.

This serialized item contains the trigger assembly and is essentially the firearm, so unlike so-called 80% firearms, you’ll need to transfer the FCU through an FFL, but once you get it, you can build a completely custom version of the P320.

This is going to unleash a flood of aftermarket P320 parts. Already, ZEV has released some items and the B&T Universal Service Weapon for the P320 has been out for awhile.

The natural follow-on to this is customization of DoD’s new arsenal of M17/18 Modular Handgun Systems like this version mocked up by SIG as a concept demonstrator.

Massif Earns USAF Approval for Women’s-Fit 2-Piece Flight Suit for All Non-Ejection Seat Platforms

July 28th, 2020

Massif – a pioneer in making the best-fitting, best-performing apparel for all service members – gains new approval
 

ASHLAND, Ore. – July 28, 2020 – Massif, a world leader in flame-resistant clothing for the United States Military, today announced a new branch-wide approval from the United States Air Force for its women’s-fit 2-Piece Flight Suit for all non-ejection seat platforms.

This is further affirmation of Massif’s long-standing commitment to providing the best-fitting garments for all end users. Massif prides itself on purposeful clothing design with a high level of detail that syncs with the real-life needs of its end-user, for maximum performance in the field.

Over the last decade, there has been a steady growth of women in the military, particularly in aviation, with women making up 20.2% of the Air Force and 19% of the United States Navy (according to 2018 statistics). Massif recognized this growth early on and over the last several years has intentionally developed a line of women’s fit clothing that provides the best in comfort and performance for female service members.  

“We know that for a team to perform well, their gear needs to perform well.  That means optimal comfort and functionality for each specific individual on that team,” said Darci Knobel, Vice President of Customer Experience. “We have always been laser-focused on making sure our clothes fit and perform their best for all end-users and have made a concerted effort to be at the forefront of providing performance garments designed specifically for women. Today’s news is further validation of our commitment, having already received approvals from the United States Navy for the women’s-fit 2-Piece Flight Suit, and approvals from all branches, including the United States Coast Guard, for our women’s-fit base layers.”

Massif’s 2-Piece Flight Suit was designed from direct end-user feedback across multiple branches and platforms. Massif wanted to enhance the capabilities of the modern aviator and aircrewman with innovative design features unique to its garments. The original patented attachment system in the suit was built to allow flexibility and movement between the jacket and pant while still aiding coverage in flash events.

Massif recently launched a short documentary film in their Massif Film Series titled “Love the Mission,” highlighting Captain Lexi McRobert, Operations Officer, G/1-189 AVN. Captain McRobert is a great example of the company’s mission to design and develop garments for women who serve.

“The days of women having to wear men’s uniforms are over,” said Knobel. “The example of Captain McRobert in our latest short film is a great one. Like nearly every woman in the military, she was issued a men’s flight suit. Wearing our women’s-fit 2-Piece Flight Suit allowed her to feel and perform her best. We are proud to provide the option for all service members to have the best-fitting gear to keep going and perform at their highest level.”

For more information on Massif, visit www.massif.com, or see what the company is up to on Instagram and Facebook.

New MYSTERY RANCH Medic Pack: MOLE

July 28th, 2020

Designed for requirements around their winning bid in the Norwegian TCCC program, the MYSTERY RANCH MOLE fills the demand for a scaled-down, feature-rich medical pack. Every square inch of this pack was designed with function in mind.

At 22L, the MOLE is similar in size, but has a slimmer profile than its popular predecessor, the RATS pack. It is built with custom spec’d 500D CORDURA® with Teflon® and PU coatings for maximum durability, UV and weather protection and finished off with IR-compliant YKK® zippers. The MOLE is highly configurable with its carrying options and internal organization, adapting to changing mission profiles.

It features removable shoulder straps and waist belt, along with a system for attaching directly to body armor, and a top handle for multiple carrying options. Also noticeable is the incorporation of the removable Stick-it pouch for stowing a helmet, jacket or other bulky object on the outside. Underneath that are a sheath for trauma shears and dual tourniquet holders. The clamshell top lid opens widely for full-viewing access to contents.

Interior removable panel for single-access items.

External shear pocket with elastic on either side for quick access items (tourniquets).

The main compartment splays open via one-handed access from its two-zip design, allowing full access to the removable internal pouches inside the pack. An additional, internal handle keeps from fighting the top lid when hanging the pack to work out of.

The internal main compartment is lined with loop fuzz which allows you to customize its five removable medical pockets. Each pocket has clear vinyl windows and internal elastic bands to keep items tidy. An extra removable panel is included for even faster access to certain materials such as tourniquets, gauze and/or gloves. Two inner sleeves along the sides provide secure slots for splints or other long items.

Here’s a quick video detailing the MOLE:

MYSTERY RANCH really stayed focused on versatility and quick access on this pack. The MOLE has already been very popular in Europe as it launches here, looks to be a consideration for your combat trauma essentials. Check out the full line of medical military packs and accessories at MYSTERY RANCH.

We are pleased to collaborate with our friends at North American Rescue for kitting out our medical packs for these photos and videos. Please contact NARescue customer service to order medical contents as shown.

*Contents not included with MR pack.

TYR Tuesday – IDTOUR VTS |Virtual Trade Show| PICO-MVW-DSX Plate Carrier System

July 28th, 2020

Show #IDTOURVTS is here!

Episode Five:

IDTOUR VTS |Virtual Trade Show| PICO-MVW-DSX Plate Carrier System

New episode launching every Tuesday.

New PICO-MVW-DSX Plate Carrier System

Coming Soon: 2021

What is IDTOURVTS?

Our mission has always been about protecting those who run towards the threat.  To that end, we created the Innovate or Die® Tour and Mobile Showroom. Over the past couple years it has allowed us to meet you face-to-face, gather your feedback and answer your questions.

Life has been put on hold for many people around the world, but you have not stopped risking your safety and health against all the threats we face today.

We can’t wait to meet you on the road again.

Thank you to the men and women of the armed forces, first responders and health care professionals who continue to put their lives on the line.  You haven’t stopped working and neither will we.

Episode One:

IDTOUR VTS |Virtual Trade Show| PICO-DS & DSX Plate Carriers

Episode Two:

IDTOUR VTS |Virtual Trade Show| The Ultimate Range Bag

Episode Three:

IDTOUR VTS |Virtual Trade Show| Shield & Dolly System

Episode Four:

IDTOUR VTS |Virtual Trade Show| Huron™ Hot Weather Uniform