Aquaterro

MCSC, ONR and CD&I Collaborating to Inform ARV Path Forward

May 8th, 2020

MARINE CORPS BASE QUANTICO, Va. —

Marine Corps Systems Command is working toward the next phase of replacing the legacy Light Armored Vehicle with a modern Advanced Reconnaissance Vehicle.

Armored Reconnaissance was the subject of a Capability Based Assessment, the results of which were summarized in a 2019 Joint Requirements Oversight Council-validated Initial Capabilities Document produced by the Marine Corps’ Combat Development and Integration. The CBA pitted Light Armored Reconnaissance Battalions against a peer threat, and identified shortfalls and gaps in capability.

CD&I emphasized the need for a modern, purpose-built ARV. As the core-manned, next-generation system, ARV must possess transformational capabilities to enable LAR Battalions to gain contact with and collect on peer-threat forces. It must accomplish this goal without becoming decisively engaged, while also successfully waging the counter-reconnaissance fight.

After the analysis and various other supporting activities, the ARV concept emerged as a transformational required capability. The characteristics differentiating the ARV from current systems include the incorporation of a battle management system, enhanced vision technologies for increased situational awareness, and target tracking and engagement capabilities.

The Program Manager for Light Armored Vehicles is pursuing this capability to support LAR Battalions, provide them with additional capabilities and set the conditions to transform the way they fight.

“Any ARV path forward will continue to be informed by the ongoing [Office of Naval Research] Technology Demonstrator effort, the ARV Analysis of Alternatives, Phase III Force Design outputs, additional Government [Requests for Information], senior leadership direction and industry feedback,” said John “Steve” Myers, Program Manager for MCSC’s LAV portfolio.

A collaborative effort

In the early planning stages, the Marine Corps envisioned the ARV as a replacement combat vehicle for the LAV. Over time, officials began to view the ARV as a vehicle platform equipped with a suite of advanced reconnaissance capabilities, with an open system architecture that can sense, shoot, move, communicate and remain transportable as part of the Naval Expeditionary Force.

PM LAV is leading the acquisition planning effort to help realize this next-generation reconnaissance vehicle. The portfolio is collaborating with ONR and the Capabilities Development Directorate of Headquarters Marine Corps, CD&I.

Capitalizing on their Detroit Arsenal location, PM LAV is working with Combat Capabilities Development Command Ground Vehicle Systems Center to update the ARV concept as a tool to analyze impacts of capability changes. Recognizing commonalities exist among the ARV and the Optionally Manned Fighting Vehicle, the Army, Navy and Marine Corps are working together to ensure collaboration for those capability gaps.

ONR is conducting research on advanced technologies to inform requirements, technology readiness assessments and competitive prototyping efforts for the ARV.

In 2019, ONR selected two vendors to design, fabricate and test full-scale technology demonstration platforms. Both platforms are expected to be ready for government evaluation in the fourth quarter of fiscal year 2020.

Through ONR’s efforts, the Ground Combat Element Division of CDD has been refining a set of requirements for the ARV to meet the future reconnaissance mission of the Marine Corps. PM LAV will leverage this information in a performance specification to be released to industry partners to build the ARV.

The collaboration between PM LAV, ONR and CD&I is crucial to the success of the ARV.

“Effective collaboration between the materiel developer, technologist and combat developer is essential to achieving the next-generation capabilities required to transform legacy armored reconnaissance into a modern, combat credible force,” said Kurt Koch, GCE Division, CDD.

Koch noted how the strong partnerships forged over the last three years set the conditions to develop the core of a next-generation, combat vehicle system—mobile on land and water—to serve as a manned hub coordinating the actions of unmanned ground and aerial robotic sensor, and weapon systems.

The path forward

PM LAV has taken several steps to ensure the success of the ARV.

In 2019, PM LAV released a Request for Information to industry comprising a set of attributes for a transformational vehicle. Based on responses to the RFI, the program office met with several vendors interested in becoming a prime vendor for ARV.

PM LAV originally planned to hold an industry day in May 2020 for the Competitive Prototyping Phase. However, the ongoing COVID-19 pandemic caused the event to be rescheduled to the fourth quarter of fiscal year 2020.

“We still want to hold an industry day so we can have an open discussion with industry, provide more clarification and answer any questions from our industry partners,” said Maryann Lawson, MCSC’s project lead for ARV.

In addition to industry engagements, the evaluation of Science and Technology efforts as well as ongoing CDD and performance specification refinement should yield the information necessary to move into the Competitive Prototyping phase.

“PM LAV will focus efforts targeted on industry RFIs and strategic small group engagements,” said Myers.

The Marine Corps plans to use the Ground Vehicle Systems Other Transaction Agreement with the National Advanced Mobility Consortium to release a draft request for prototype proposal, or RPP, for the ARV base variant in the fourth quarter of fiscal year 2020.

The government is interested in industry feedback and collaboration to shape the requirement and statement of work for the final RPP release in spring 2021. Industry partners are encouraged to periodically check beta.sam.gov and engage with the NAMC for future RFIs and program updates.

Story by Matt Gonzales, MCSC Office of Public Affairs and Communication | 10th Marine Regiment

Photo by photo by Cpl. Corey A. Mathews

FirstSpear Friday Focus – Technical Woobie

May 8th, 2020

Today we are getting the first look at an all new garment from the FirstSpear American Merino Wool Line. Meet the Technical Woobie. Constructed with premium USA materials including FS ACM 600 Merino for warmth and FS signature apparel nylon accents which add abrasion and wind resistance. Features a modest tail, high collar with adjustable hood, thumb holes, as well as generous hand warmer pockets lined with FS ACM 100 Merino. The Full length zipper and pockets utilize premium zipper hardware and pulls.

A very cool feature FS incorporated are button holes inside the hand warmer pockets along with cord loops along your internal zipper seams which allow the user to route ear buds or communication cables for discreet cable management.

The Technical Woobie offers great everyday style matched with some of the most high performance material combinations and features available. It will quickly become the one piece you will want to take with you everywhere! 100% made in the USA with 100% USA materials.

Now shipping in Black, Sand, Commando, and Black/Heather Grey. Comes with FirstSpear’s standard lifetime warranty on materials and craftsmanship.

www.first-spear.com/technical-woobietm-acmtm-warm-600

Agilite’s New Search Engine – The Only Search Engine Not Run By Liberals

May 8th, 2020

Agilite has launched it’s new “Tactical Helmet Finder” search engine which it describes as “The only search engine not run by liberals”

As the world leader in tactical helmet covers & accessories they wanted to make it much easier for you to know what cover will fit your helmet well.

With thousands of helmet manufacturer/model types out there it used to be tricky but their search engine uses their years of experience to make it simple and easy.

Try it out to find a cover or accessory for your helmet here: agilitegear.com/pages/tactical-helmet-cover-finder

Tactical Tailor Anti-Structural Munition Grenade Pouch

May 7th, 2020

This is one of the coolest munitions in the US inventory. The Mk 14 Mod 0 Anti-Structural Munition is a thermobaric grenade.

And this, is how you carry it.

Get yours at www.tacticaltailor.com.

MilesTek Debuts Line of In Stock, IP67-Rated, Ethernet & USB Cables with Glenair Mighty Mouse Connectors

May 7th, 2020

IRVINE, Calif. – MilesTek, an Infinite Electronics brand and a leading manufacturer and supplier of products designed to address military and avionics applications, announced today that they are now stocking a series of Ethernet and USB cable assemblies featuring Glenair’s 801 Series Mighty Mouse connectors. These assemblies are rugged, tactical and built to Category 5e, Category 6 or USB 2.0 standards.

MilesTek’s Mighty Mouse cables are available with either a male or female Mighty Mouse connector on one end, and a standard USB type-A or RJ45 connector on the other end. The Mighty Mouse connectors offer IP67 protection, even when unmated, and provide exceptional grounding and lock-down characteristics compared to standard connectors. These cables are constructed with PVC or low-smoke zero-halogen jackets. All of the assemblies in this line can withstand outdoor environmental conditions and are shielded for EMI/RFI resistance.

“This new line fills a growing need in the market, providing Mighty Mouse assemblies without the usual 10-16 week lead times. By offering these assemblies off-the-shelf, we can help our customers working with mission critical applications in harsh environments and in line down situations,” said Dustin Guttadauro, Product Line Manager.

MilesTek’s new Ethernet and USB Mighty Mouse cable assemblies are in stock and available for immediate shipment.

Vortex Optics – Impact 1000 Rangefinder

May 7th, 2020

THE IMPACT® 1000 – EASY TO USE. EASY TO LOVE.

BARNEVELD, Wis. – The next evolution in the Impact® line of laser rangefinders offered by Vortex® gives hunters and recreational shooters the affordable, angle-compensated rangefinder they’ve been looking for.

Simple to use and easy to carry, the Impact® 1000 offers features bowhunters will love—like angle compensation and ranging as close as five yards—and the power range lovers need to go out to 1,000 yards.

It also features three ranging modes: Angle compensated Horizontal Component Distance (HCD), Line of Sight (LOS), and Scan, giving users the choices they need to get range for a shot, or distance for a calculation. It’s all packaged in an intuitive interface that won’t get in the way in the field.

The Impact® 1000 packs a whole lot of value into a small package. And, like all our optics and electronics, it’s covered by the Vortex® VIP Warranty. Now, there’s no excuse for entering the field without a rangefinder.

MSRP:
$269.00 – Impact® 1000 Rangefinder

Range Reflective (yards) 1000 yds
Range Tree (yards) 800 yds
Range Deer (yards) 500 yds
Magnification 6x
Linear Field of View 341 feet @ 1000 yds
Angular Field of View 6.5 degrees
Eye Relief 15 mm
Operating Temperature -10 C to 55 C
Length 3.8 inches
Width 1.4 inches
Weight 5.5 oz

5.11 and SIG SAUER Team Up for “Inside the Blue Line” Documentary

May 7th, 2020

IRVINE, C.A., (May 7, 2020) – 5.11, Inc. and SIG SAUER, Inc. are pleased to announce the launch of Inside the Blue Line, an original content series that presents the reality and evolving demands on law enforcement today. In this series the Manchester, New Hampshire Police Department granted unprecedented access to a film crew from Ironclad Media to follow officers on the front line and into the line of duty.  

“The goal of our project was to give the public a greater appreciation for life behind the badge today,” said 5.11’s Chief Marketing Officer, Debra Radcliff. “Watching these officers in action and learning about the challenges they face was a life-changing experience. We are honored to bring their stories to life.”

The official series is now live at insideblueline.com, and will be launched across 5.11 and SIG SAUER social media next week at the commencement of National Police Week on Monday, May 11, 2020.  Additionally, the Inside the Blue Line video series is part of a robust campaign 5.11 is launching to commemorate National Police Week. Next week, 5.11 will start to sell the Honoring Those Who Serve patch with proceeds from the sale being donated to The National Law Enforcement Officers Memorial Fund.

“We are honored and excited to have partnered with 5.11 and the Manchester Police Department on this project,” said Tom Taylor, Chief Marketing Officer & Executive Vice President, Commercial Sales, SIG SAUER, Inc. “SIG SAUER and 5.11 are aligned in our core mission – to serve and support law enforcement and the defense community with our products – which unites us as brands. This was an extraordinary project, and in these unprecedented times, we have a heightened awareness for the sacrifices that are being made by the law enforcement community and thank them for their service.”

Propel Meets the Growing Demand with CSM-1000 Face Masks

May 7th, 2020

Propel LLC is woman owned small business, focused on product innovation, development, sales, and marketing of innovative textile driven technologies for the First Responder and US Military markets.

 Propel has quickly pivoted in response to the COVID-19 pandemic and developed a Cloth Mask using Rhode Island-made textiles and a RI-made nose stay.

The CSM 1000 mask uses athletic wear textiles that are:
• Breathable
• Comfortable
• Quick drying
• Hand or Machine washable
• Soft, comfortable elastic band for retention
• Adjustable nose stay for customized fit

At Propel, we usually spend our time developing innovative solutions for customers such as the US Navy, US Army, US Air Force and US Marines. In response to the COVID

-19 pandemic we have reacted quickly to leverage our deep knowledge of textile technology and the US textile industry to develop a comfortable, quick-drying, washable cloth face mask.

The full scale of the shortage of face masks within the United States began to take shape as early as March where both the CDC and FDA began to reach out to American businesses to request local supply of alternative masks (no 510(k) clearance). The FDA recognized the urgent need for face masks in the setting of the COVID-19 pandemic due to increased use and shortages in their availability – luckily Propel’s President, Ms. Clare King and her team of textile experts and designers had already anticipated that this would be the case and were focused on this problem for several weeks prior.

Our goal was a great product at a fair price. From concept to production took 5 days, including developing the all-important aluminum nose stay. We are now producing our masks in multiple US factories, sourcing US-made textiles and components from our home state of Rhode Island and across the country.  Factory capacities are expanding to meet demand.

Available in white, we are adding navy blue, black and tan. We are working hard to have inventory on hand, but right now masks are selling even before they hit the shelf.

We are serving the need for cloth masks for individuals, families, employees and employers everywhere, as well as the US Military and our valued First Responders.

PLEASE NOTE:

You may use this face mask when face masks approved for medical purposes are unavailable. Although FDA has not specifically cleared or approved our masks, FDA has authorized their use under an Emergency Use Authorization for use by health care practitioners to help prevent the spread of infection or illness in healthcare settings and by the general public to help slow the spread of the virus during the COVID-19 pandemic.*   The CSM Mask does follow all FDA requirements for masks being made in response to the COVID 19 need for social distancing.

BODY CONTACT MATERIALS ON THIS MASK INCLUDE: KNIT ELASTIC, 100% POLYESTER THREAD, AND 100% NYLON KNIT FABRIC. MACHINE WASH OR HAND WASH, HOT WATER AND SOAP.   LINE DRY OR TUMBLE DRY. NOT FLAME RESISTANT.

$6 per Mask

Minimum Order Quantity:12 (per color)

Orders can be placed here: propelmasks.com

Free Ground shipping

Requests for Quotes: jfaherty@propel-llc.com

Requests for information or questions to John Faherty +1 207.502.0297

For DOD Quotes: jdlong@propel-llc.com

Company information propel-llc.com