XC3 Weaponlight

ADS Federal Range Day 20 – Internal Scope Cap by Lirces3, LLC

August 26th, 2020

Lirces3, LLC is a Veteran Owned small business. Seth, the owner developed the Internal Scope Cap for the best reason ever, necessity. He was tired of the issue scope covers warping and then breaking when exposed to the sun. Seth ought to know; he served in both OIF and OEF.

The ISC accomplishes three “Optical Obfuscation” functions:

-Conceals flash or glint from reflection

-Incorporates an iris to limit, or completely close off light through the optic

-Incorporates a laser filter to protect the sniper or observer’s eyesight from laser threats

Finally, it protects the lenses of the optic.

Although the ISC was developed for use with Rifle Scopes, it can also be used with Binoculars, Spotting Scopes, Night Vision Goggles and Thermal Cameras. This is thanks to a rubber boot or scope specific adapting ring.

Although the system defeats IR pulse laser detection systems used on stacked optics. this isn’t just for military use. These same threats, including laser, are being directed against law enforcement officers. It can also be used by the sportsmen and armed citizen alike.

Units and agencies can procure all products shown during ADS Federal Range Day by contacting ADS Inc.

SOLGW – Bolt Carrier Group – the Heartbeat of the Rifle

August 26th, 2020

Stick to this formula and you’ll do well. Wizard piss and gimmicks come and go. Look at what’s stood the test of time. Return to the fundamentals of function.

sonsoflibertygw.com/solgw-5-56-bolt-carrier-group-158-carpenter-sp-hpt-mpi

Bolt:
• Precision machined from Carpenter Technology No. 158 alloy,
• Heat treated per mil-spec,
• Shot peened per ASTM B851/SAE AMS2430S,
• Vibratory tumbled
• Individual high pressure/proof (HP)
• Full Auto test fired as an assembly
• Individual magnetic particle inspection ASTM E1444/E1444M (MP)
• Markings deep laser engraved (SP=Shot Peened, HP=High Pressure Tested, MP=Magnetic Particle Inspection.)

Extractor
• Precision machined from 4340 tool steel alloy per SAE AMS6415T/AMS6484D (vs 4140),
• Heat treated
• Shot peen per ASTM B851/SAE AMS2430S.

Extractor Retaining Pin
• Precision machined and ground S7 Tool Steel
• Heat treated per ASTM A681-08
• Shot peened per mil-spec print
• Manganese phosphate

Extractor Spring:
• Tactical Springs/Sprinco 5 coil, ASTM Grade A401 Chrome Silicon wire stock
• Heat treated
• Stress relieved, Molybdenum-Disulfide infused
• Cryogenic processed (all post winding)
• Mil-spec black insert/synthetic elastomer extractor buffer (nitrile-butadiene, shore hardness 80+/-5 durometer per MIL-PRF-6855)

Ejector:
• S7 Tool Steel
• Heat treated per ASTM A681-08
• Shot peened per Mil-Spec
• Manganese phosphate

Ejector Spring:
• Heat treated
• Mil Spec

Gas Rings:
• Standard stainless steel per Mil-Spec X3

Carrier:
• Machined from AISI 8620 aircraft quality alloy per ASTM A108/A322-13
• Full auto profile
• Heat treated
• Carburized/strain relieved, hard chrome bore
• Precision ground gas key interface
• Sons of Liberty Battle Flag logo deep laser engraved
• Manganese phosphate

Gas Key:
• Machined from 4130 chromoly steel alloy per ASTM A108/A322-13
• Heat treated, hard chrome internal
• Manganese phosphate
• Permatex sealed
• Grade 8 hex screws torqued and staked all per mil-spec

Cam Pin
• Precision machined 4340 chromoly steel alloy per SAE AMS6415T/AMS6484D
• Heat treated/processed per mil-spec
• Manganese phosphate
• Solid film lubricant applied and cured per mil-spec

Firing Pin:
• Precision machined 8640 steel alloy
• Heat treated/processed per mil-spec
• Hard chrome plate

Firing Pin Retaining Pin
• Precision machined from 1038 carbon steel
• Heat treated/processed per mil-spec
• Manganese phosphate

Varusteleka – Särmä Yellow Merino Hoodie

August 26th, 2020

Varusteleka’s Särmä merino wool hoodie is now available in Yellow.

Made from Merino wool, the Särmä Hoodie features:

Two handwarmer pockets (volume about one wine bottle each) and a kangaroo pocket on the back, which can be accessed from either side, good place for storing gloves, hats, and other accessories. On the left sleeve, you’ll find a zippered pocket, roomy enough for any smartphone (iPhone 6 Plus, Oneplus One or Samsung Note 2/3/4 etc.). Velcro on the sleeve pocket.

Slim fit, with long hem. Quality zipper on the front, with a flap on the backside to prevent it from making contact with the skin if you’re not wearing anything under this. The collar is so high when zipped up that you really don’t need a scarf of neck tube or whatever. The hood has drawcord tightening and is suitably roomy, but not overly so – it works as an underlayer when worn with a helmet during cold weather. Thumbholes on the sleeve cuff.

New, three-piece hood.

Offered in a variety of colors.

Get yours at www.varusteleka.com/en/product/sarma-merino-wool-hoodie/30651.

There is also a ladies version.

ADS Federal Range Day 20 – Mad Minute Suppressors

August 25th, 2020

Mad Minute Suppressors gave us a sneak peek of their newest design, created for use with CBP’s new B&T APC-9Ks.

Mad Minute’s suppressors are 3D printed and feature heat sink fins around the outer case.

More on this soon.

Units and agencies can procure all products shown during ADS Federal Range Day by contacting ADS Inc.

ADS Federal Range Day 20 – DeSantis Holsters

August 25th, 2020

DeSantis Holsters has been manufacturing in the US for over 40 years, with a long relationship with law enforcement.

They showed us their new Kydex Radio Pouch for the Motorola X6000. It comes as a full kit with a variety of mounting options. Additionally, all of the controls are accessible, even while the radio is mounted in the pouch.

They assured us that they can quickly gen up a carrier for the Motorola X8000 if there is sufficient interest. They just need the proper dimensions.

Units and agencies can procure all products shown at ADS Federal Range Day by contacting ADS Inc.

ADS Federal Range Day 20 – SIG Optics ROMEO8T

August 25th, 2020

Released in 2019, the ROMEO8T is a 1×38 Red Dot Optic from SIG Optics which features a 2 MOA Red Dot.

There are 10 daytime brightness settings and two night bision settings.

SIG claims a 100,000+ battery life from the single CR123A battery.

Units and agencies can procure all products shown during ADS Federal Range Day by contacting ADS Inc.

ADS Federal Range Day 20 – Getac Video Solutions

August 25th, 2020

The Getac Body Worn Camera captures video on the go. Highly configurable, it can be set for manual record, full-time recording, and automatic triggering (lightbar activation, weapon release, etc) as well as onboard recording or live streaming.

Additionally, there is built in Wi-Fi, Bluetooth and GPS with automatic geotagging and download of data upon Wi-Fi connection.

The camera captures 30 frames per second and has a 120 deg field of view. Expect 12 hours of recording time and up to two days of standby time. Additionally, it’s IP-67 certified for use in inclement weather.

Units and agencies can procure all products shown at ADS Federal Range Day by contacting ADS Inc.

ADS Federal Range Day 20 – CBR Multi-Purpose Wipe from M2DCON

August 25th, 2020

Pouches of the CBR Multi-Purpose Wipe from M2DCON were everywhere during Federal Range Day. These is a commercial equivalents to the US DoD Joint Service Equipment Wipe (JSEW/M334) were used to decon a wide variety of equipment between users. Even though the wipe is safe for personal hygiene, it has also been certified to neutralize against chemical (nerve, blister and other agents of concern) and biological (bacteria, viruses and spores) contamination.

Units and agencies can procure all products shown during ADS Federal Range Day by contacting ADS Inc.