SIG MMG 338 Program Series

You Never Stop Being A Paratrooper

August 5th, 2018

Some of you know this man. He has been a Paratrooper for a long time.

A U.S. Army Paratrooper practices Sustained Airborne Training during Leapfest 2018 at the University of Rhode Island in West Kingston, R.I., Aug. 1, 2018. Leapfest is the largest, longest-standing, international static line parachute training event and competition hosted by the 56th Troop Command, Rhode Island Army National Guard, to promote high level technical training and esprit de corps within the International Airborne community. Over 300 Paratroopers from nine different countries are participating this year. (U.S. Army photo by Staff Sgt. Justin P. Morelli)

SCUBAPRO Sunday – Wetsuits

August 5th, 2018

Cleaning Your Wetsuit

Always clean and dry your suit as soon as possible. Rinse your wetsuit with fresh water. Its best to fill a bucket/tub/ trash can/ bath tube up with clean water and soak your wetsuit in that so it gets clean all the way thru. You can use a wetsuit shampoos and conditioners, PISS OFF and Sink the Stink are good and there are others out there. You can also use mild laundry soap or baby shampoo to clean wetsuits. Try to avoid peeing in your wetsuit; Urine is a hard smell to remove. Inspect your wetsuit for rips and tears as you are washing it.

Drying Your Wetsuit

After washing and rinsing your wetsuit, turn it inside out to help retain the flexibility on the outside of the wetsuit. Hang to dry on a wetsuit hanger or three to four plastic hanger, but don’t use a wire hanger. Wire hangers will cause the neoprene to stretch over the shoulders. The sun is your wetsuits worst nightmare as the UV rays can damage the neoprene and shortening the lifespan and the effectiveness of your suit.

                         

 SCUBAPRO Dry suit hanger      SCUBAPRO Universal Hanger

Storage  

Store your wetsuit on a flat surface or on a wetsuit hanger. Avoid folding whenever possible to avoid creases. If stored folded it can leave creases and those will take away from the insulation properties. Avoid leaving your wetsuit in stuffed in a bag, or in a hot car, as it will reduce the lifespan of your suit.

Things that Can Damage Your Wetsuit

Hot water can ruin neoprene, causing it to lose some of its flexibility. Sun and UV rays cause neoprene wetsuits to age quickly. Dry your wetsuit in a shaded area. Chlorine or salt water will break down the neoprene. The crystals for the salt water will cut your suit. This is why it is important to rinse your wetsuit with fresh water after use in chlorine or salt water.

Things to Avoid

Do not use bleach or put your wetsuit in a washer machine or a dryer. Everyone loves getting into a dry wetsuit but the drier is real bad for it. (So maybe just long enough to make it warm if you feel like you have to) Avoid pulling your wetsuit over rings, watches or anything it could get caught on. Also just pulling it on can rip it. Avoid putting petroleum jelly on your suit. Petroleum products destroy the adhesive of the wetsuit seams and can penetrate the neoprene making it hard to repair. If you are trying to avoid chafing you can use Body Glide as that has been made to be wetsuit friendly. Using beeswax or zipper lubricant can prolong the zippers life and help keep them from snagging and tearing and it also helps them work better.

Repairing Tears and Rip

Inspect your wetsuit for rips and tears after each use. The rips and tears are much easier to fix when they are small, and will grow if they go unnoticed. Wetsuits can easily tear from things like watches, pier pillions and rocks. Small tears (around 1-2 inches long) can be easily repaired. Tears bigger than a few inches may require professional repair services. If the stitches or seams are torn it may also be a good idea to take your suit to a professional for repairs.

Things you should keep on hand

Storm sure Neoprene Queen, Aquaseal and E6000 fabric glue. These are good to just leave have in a small zip-lock container in your dive bag. It is better to stay ahead of a rip. There are also wetsuit repair kits available that contain everything you will need. If you are deployed overseas and cant’ get the a true wetsuit glue, then you can try a “bike tire repair kit” from any bike store (the glue used to fix a bike tire inner tube is basically the same) and is ok for “field repair” it is not recommended by any wetsuit companies but it is a good last resort if you having to dive for a couple hour in a ripped wetsuit and have no other options, like taking your buddies suit and saying “ wow you ripped your suit that sucks”

If you want learn a lot more about wetsuits watch the below video

Below is quick summary

• Rinse with fresh water after dives to remove the salt water
• Hang up inside/out for drying
• Do not dry under sunlight to prevent neoprene being damage (sun baking) – this one is the most important.
• Do not use laundry liquid to prevent neoprene being damage
• Do not put in dryers
• Do not Iron
• Do not Bleach
• Do not store too much folded to avoid wrinkles

All this information is on this label stitched inside your suits.

Wetsuits

Mission Ready Announces Letter of Intent for Acquisition of Unifire

August 5th, 2018

VANCOUVER, BRITISH COLUMBIA – July 31, 2018 – Mission Ready Solutions Inc. (“Mission Ready” or the “Company”) (TSXV:MRS) announces that it has entered into:

(a)     a non-binding letter of intent to acquire (the “Acquisition”) Unifire, Inc., a company based in Spokane, Washington (“TargetCo”);

(b)     a non-binding term sheet (the “Term Sheet”) pursuant to which Zenith Insured Credit, LLC, a New York-based trading and specialty finance company (the “Creditor”), will provide TargetCo with a new USD$20 million asset-based credit facility (the “Credit Facility”);

(c)     an engagement letter (the “Engagement Letter”) with Bay Crest Partners, LLC, a New York-based FINRA registered broker-dealer and financial services firm (the “Agent”), to complete a private placement of up to USD$15 million (the “Offering”); and

(d)     a fee agreement (the “Fee Agreement”) pursuant to which Celadon Financial Group, LLC, a FINRA registered broker dealer (“Celadon”) identified qualified investors and other broker-dealers in connection with the Acquisition.

The Acquisition

On April 19, 2018, the Company entered into a non-binding letter of intent to acquire all of the issued and outstanding shares in the capital stock of TargetCo. The Acquisition is to be completed as a reverse-triangular merger under applicable Washington corporate law with TargetCo becoming a wholly-owned subsidiary of the Company. The purchase price of the Acquisition is an estimated USD$9 million, subject to customary purchase price adjustments. Of the USD$9 million purchase price, USD$4 million is to be paid and satisfied in cash and USD$5 million is to be paid and satisfied through the issuance by the Company of approximately 26,315,790 common shares in the capital of the Company with a deemed issuance price equal to USD$0.19 per share (CAD$0.25 per share using an exchange rate of 1.32). The cash portion of the purchase price is currently expected to be funded by a portion of the net proceeds raised as part of the Offering.

TargetCo specializes in providing mission critical equipment and services to the US and international militaries, law enforcement, tactical groups, fire and rescue, utilities, power generation nuclear and hydro power plants, as well as the public.  TargetCo’s trailing revenue for the 6-month period ending June 30, 2018 was approximately USD$18.3 million and its net income for the same period was approximately USD$750,000.

The Acquisition, if completed, is a strategic transaction for Mission Ready, as it would significantly increase Mission Ready’s sales and would provide privileged access to valuable contracts that are set aside for small business, which contracts might not otherwise be available to Mission Ready.  These contracts from the most recent 5-year renewal period, which are valued at over USD$10 billion, continue to be awarded to a small number of eligible participants in advance of the next renewal date, which is expected in 2019.

Jeffery Schwartz, President & CEO of Mission Ready, states: “The Mission Ready team is keenly focused on the targeted growth and development of the Company’s expanding portfolio of leading personal protective solutions.  To support this growth plan, we have put in place an experienced senior management team and Board of Directors that possesses strong industry relationships and contacts to translate into future sales and business development opportunities.  We are now seeing the benefits of this strategy both organically, by working directly with customers and distribution partners in order to grow our sales channels, and now through this potential strategic acquisition, which would become additive to our overall long-term vision and strategy. If completed, this acquisition would immediately provide Mission Ready with a high level of contract past-performance and will open doors for the Company to participate in opportunities that would not otherwise be available to Mission Ready. We are excited at the prospect of ultimately combining and leveraging our resources and connections with those of Unifire to grow their revenues and expand the business as a wholly-owned subsidiary of Mission Ready Solutions Inc.”

The Acquisition, including the payment of the purchase price, is subject to approval of the TSX Venture Exchange (“TSXV”). The Acquisition is also conditional upon receipt of all other applicable regulatory and third party consents, completion of satisfactory due diligence by the Company and the execution of definitive legal documentation by the parties. The Company believes that the Acquisition constitutes a Fundamental Acquisition, but will not constitute a Non-Arm’s Length Transaction and will not result in a Change of Control as defined by the TSXV’s policies.

Additional detailed information about the Acquisition, including financial information of TargetCo, will follow upon the entering into of definitive legal documentation.

The Credit Facility

The Company has entered into the Term Sheet for the provision of the Credit Facility, which is to be used primarily to fund the operations of TargetCo following the completion of the Acquisition.  In connection with the Credit Facility, the Creditor is to have first lien security against all of the assets of TargetCo, and other security to be determined following completion of the Creditor’s due diligence. The borrowing base for the Credit Facility will be equal to 80% of eligible receivables and up to 100% of the costs of goods on purchase orders received.  The fees associated with the Credit Facility will include a factoring fee computed with respect to accounts receivable borrowed against and a purchase order fee computed with respect to advances made against purchase orders, both of which are at competitive rates.  The Credit Facility is expected to require TargetCo to have orders of a minimum of USD$100 million within the first 15 months from the first date of accessing the Credit Facility, failing which TargetCo will be required to pay a 0.5% penalty on the face value of the orders received during such 15-month period.  The Credit Facility is subject to receipt of all necessary approvals, including the approval of the TSXV, as well as satisfactory due diligence by the Creditor and the entering into of definitive legal documentation.

The Offering

The Company has entered into the Engagement Letter with the Agent, pursuant to which the Agent is to act as the exclusive placement agent with respect to a private placement financing. The Engagement Letter contemplates that the private placement will be of equity, equity-linked debt, convertible securities or other securities issued by the Company (the “Securities”) at a price or conversion price, as the case may be, to be determined by the Company and the Agent, which price will be finalized in accordance with the TSXV policies, for gross proceeds of up to USD$15 million.  The Offering is to be conducted on a “reasonable efforts” basis.

As compensation for its services, the Agent will be entitled to fees equal to 6.0% of the gross proceeds raised in the Offering. The Agent will also be reimbursed for its reasonable expenses incurred as part of the Offering.  Pursuant to the Fee Agreement, the Company is to pay a commission equal to 2.0% of the gross proceeds raised in the Offering to Celadon.  All such fees and commissions are payable in cash upon closing of the Offering.  Celadon shall also separately receive a fee directly from the Creditor for assisting in obtaining the Credit Facility.

The Company anticipates that it will use the gross proceeds of the Offering to pay the cash portion of the purchase price for the Acquisition (USD$4 million), to pay certain debts and obligations of TargetCo (approximately USD$6 million), and to use the remainder primarily for fees, commissions, and working capital and general corporate purposes for the next several months of operations of the TargetCo business (up to USD$5 million).

The Offering is subject to receipt of all necessary approvals, including the approval of the TSXV.  All securities issued in connection with the Offering shall be subject to a four month statutory hold period.

This news release does not constitute an offer to sell or a solicitation of an offer to buy any of the securities described herein, and these securities will not be offered or sold in any jurisdiction in which their offer or sale would be unlawful.  The securities have not been and will not be registered under the United States Securities Act of 1933, as amended (the “1933 Act”), or any state securities laws of the United States.  Accordingly, these securities will not be offered or sold to persons within the United States unless an exemption from the registration requirements of the 1933 Act and applicable state securities laws is available.

Completion of the Acquisition, the Credit Facility and the Offering are subject to a number of conditions, including but not limited to, execution of definitive documentation and receipt of all applicable regulatory and third party consents. There can be no assurance that the Acquisition, the Credit Facility and/or the Offering will be completed as proposed or at all.

Zulu Foxtrot – Rough Necks T-shirt

August 5th, 2018

If you follow the SolSys Instagram account, you know how much I love SciFi. While I prefer the book over the movie, who doesn’t enjoy “Starship Troopers”?

FD820570-F3BF-4584-8169-9E7F412A326D

Fellow travelers may want to pick up this new “Rough Necks” T-shirt from Zulu Foxtrot.

TYRANT DESIGNS CNC | Gen4 & Gen5 Glock Extended Magazine Release

August 4th, 2018

TyrantCNC-G43emr-both-onwhite01-1500

Tyrant Designs CNC’s new Extended Magazine Release is finally something you can put your finger on. Manufactured for Gen4 & Gen5 Glocks the EMR sports a very grippy yet comfortable chevron pattern. Because the TD CNC engineers are always about attention to detail, they added a slight pocket design on the backside of the Glock mag release just for aesthetics. Great for both right handed and left handed operators, the Tyrant Designs Glock Extended Magazine Release retains all factory functionality but with crisper, easier and quicker magazine exchanges.

001_DSC_0071

“We are very happy to announce the next step in our Glock components with our Extended Magazine Release for the Generation 4 & 5 Glock. We have gotten so much positive feedback from our awesome customers in regards to our Glock 43 EMRs. That feedback made us decide to continue with the known design language for our Gen4 & Gen5 components. As always we will continue to strive for innovation and are very thankful for our customers/fans.”

Shop the new Gen4 Gen5 Glock EMRs Now at WWW.TYRANTCNC.COM

Tripwire Bravo-3 Training Conference – Registration Now Open

August 4th, 2018

Registration for the 2nd Annual Bravo-3 Training Conference and Vendor Show is Open

First Responder Conference to be held March 4-6, 2019 in Daytona Beach, Florida

 

Gettysburg, PAAugust 1, 2018Registration is now open for the 2nd annual Bravo-3 Training Conference & Vendor Show. Bravo-3, owned and produced by Tripwire Operations Group, connects SWAT operators, K9 handlers, bomb squad (HDS/EOD) technicians, law enforcement, first responders and military personnel with the industry’s leading subject matter experts, innovative brands and newest products for three days of training and professional networking. The Bravo-3 conference runs March 4-6, 2019 in Daytona Beach, FL.

The Bravo-3 Training Conference and Vendor Show will consist of classroom training each day of the conference. The conference will kick-off with a keynote address delivered by former US Marine Corps Sniper, MARSOC Sniper Instructor, artist, and author Jason Delgado. Training will involve a wide range of subjects and speakers, including:

·         Tactical Tracking with Jeff Schettler of Georgia K9 National Training Center

·         Blast Injuries and Care Under Fire with medic Hugo “Doc” Canedo of Rockwell Tactical Group

·         Introduction to Homemade Explosives (HME) with Ryan Morris of Tripwire Operations Group

·         Proper Use of Qualified K9 Teams for SAR Operations with Dr. Margo Machen

·         Asymmetric Threat Recognition & Counter Transnational Organized Crime with MCTFT

·         Comprehensive IED Electronics with Jeff Jennings of Improvised Electronics

·         Medical & Physiological Conditions Affecting Olfactory Acuity in EDDs with Dr. Lee Palmer

·         Tactical Mindset Training with Jared Ross of Rockwell Tactical Group

·         And Many More

For a full list of instructors and courses, visit the Bravo-3 Course Lineup.

“Bravo-3 is an opportunity for first responders to come together and gain access to the finest training from respected and experienced experts. Our goal is to help all first responders remain at the forefront of their specialties,” said Ryan J. Morris, owner, Tripwire Operations Group.

Joshua Mills, organizer of Bravo-3 and Tripwire explosives specialist, added, “Last year’s Bravo-3 Conference set a high standard that we’re out to surpass in 2019. The response has been incredible so far, with a long list of great vendors and speakers booked. We look forward to seeing everyone in Daytona this March.”

To learn more and register, visit the Bravo-3 registration page.

Follow Bravo-3 on Instagram @bravo3-actual and on Facebook @B3united for conference information and event news.

 

You Never Know Where They’ll Show Up

August 4th, 2018

This time it’s me, in my hometown. I try to stop by Ballahack Outdoor about once a month to see what’s new.

But I guess the real title of this post should be, “What would you do for a Klondike Bar?”

Unity Tactical FUSION Friday

August 3rd, 2018

FUSION, by Unity Tactical, is a system of modular, multi-purpose components that provide end users unparalleled flexibility in mounting accessories to weapon platforms.  It offers complete control in attachment of lights, lasers, sights, and other equipment to achieve complete integration, optimal placement, lightest weight, and most economy of space.

This FUSION configuration features the Micro Hub 2.0, Backup Iron Sight – Folding, and Lightwing – Right.  As configured in the photos, it creates a perfect combination for a laser, light, and BUIS.  The Micro Hub 2.0 is ambidextrous and can set the accessory mounting surface on either the right or left side of the host rail and can be placed in front or behind a laser.  Placing it behind allows the laser to be put at the very front of the rail with no interference.  The Back Up Iron Sight – Folding will completely clear laser apertures if placed in front of a laser module, but some users prefer to have the laser as far forward as possible to facilitate manual operation.  The LightWing – Right will cantilever a weapon light forward if placed on the right side of the rifle.  It will also accept a direct mount Surefire Scout or Millennium series light as well as Streamlight PRO-TAC Rails Mount lights.  This configuration will push the light forward so it is in line with the laser.  The LightWing will also raise the light above the bore, so it is not obstructed by barricades.

FUSION components are machined from 6061-T6 aluminum and MILSPEC Type 3 anodized.  Designed and made in the US from US materials and good ole’ fashioned American innovation.  FUSION is the original and best modular accessory mounting system.  Make your gear work for you, not the other way around.

FUSION components are available from Unity Tactical and authorized dealers to build your perfect setup.

www.unitytactical.com